User Guide

061114! www.elitescreens.com! 4!
!
Fig.18!
6
. Once the screen material (D) is fully extended, secure the material by snapping the buttons onto the frame
studs as shown in Fig. 13-15. Fasten the buttons in the following order ABCDEFGH.
7. Tie 4 pieces of rope (2 on the left and 2 on the right) to the eyebolts (F) that are located at the top of the
frame. Next, lift the screen up while simultaneously opening the frame legs. Two people are needed for this
step. Fig.16-17
8. To secure the frame, place a stake (I) into each hole located on the
frame footing, and hammer it into the ground. Finally, tie the 4 ropes
(G) to the stakes to prevent the screen from tilting or falling over. As
fig.18.
9. After using the screen, disassemble the screen and store it in
the provided carrying bag (h). To disassemble the screen, follow
the user guide procedures in reverse order.
For a local Elite Screens contact or Technical Support, please visit
www.elitescreens.com
!
Fig.13!
Fig14!
A!
B!
C!
D!
E!
F!
G!
H!
Fig.15!
Fig.16!
Fig.17!
Fig.19!