User Guide

Rev041115-JA 1 www.elitescreens.com/yardmaster

Yard Master Series

Outdoor Movie Screen

User’s Guide

What’s in the Box?

A. Screen material x 1

C. Curved Stake x 4

D. Ring-Stake x 4

E. Guy-rope x 4

F. M6*40 hex nut x 2

G. M6*40 hexagonal screw x 2

H. Carrying bag x 1

I. Screen material bag x 1

Frame Assembly

1. Assemble the frame by connecting the letters on the ends of the tubes together as shown in the

diagram below. For example, A to A, B to B etc.

2. A and J are attached and secured with the provided Hexagonal Screws (G)

B. Steel

ube x 12

PAGE 1
Yard Master Series Outdoor Movie Screen User’s Guide What’s in the Box? A. Screen material x 1 B. Steel Tube x 12 -14 C. Curved Stake x 4 D. Ring-Stake x 4 E. Guy-rope x 4 F. M6*40 hex nut x 2 G. M6*40 hexagonal screw x 2 H. Carrying bag x 1 I. Screen material bag x 1 Frame Assembly 1. Assemble the frame by connecting the letters on the ends of the tubes together as shown in the diagram below. For example, A to A, B to B etc. 2.
PAGE 2
Take an example for 120" with 14pcs steel tube: Screen Material Assembly 1. Lay the assembled frame on the floor and take caution not to scratch the frame and/or floor surface. Note: The silver securing pegs on each end of the tube should be facing the floor. 2. Find the opening of the screen material and start by sliding it from the top of the frame, with the back of the screen material facing the floor.
PAGE 3
2. Raise the frame vertically on the ground and rotate the short tube on both sides of the foot stool 90° in the direction of the white screen so that that the holes on the frames are lined up. Finish attaching and securing the side frame to the feet with the hexagonal screws and hex nuts as shown below. Ear Guy Rope Hexagonal Screw 3. Drive the Curved Stakes through each hole on the ends of the legs. 4. Tie two of the Guy-Ropes to the front Curved stakes. 5.