User`s guide

071614-ESA www.elitescreens.com 2

Opening the case

1. Begin by unlocking the four locks by turning them counter-clockwise.

2. Then open up the case making sure the left and right hinges are fully extended.

3. Install the Top Cover Foot (D) on the Left and Right side as shown below.

Drape Kit Installation

1. Once the case has been opened, you will find the Drape Kit inside the top cover.

2. Insert the Vertical Support T-Bar (B) into each slot inside the case.

3. Connect the Horizontal Support Bar (A)to the Vertical Support T-Bar (B).

4. Then, attach the Drape (C) to the Velcro on the Horizontal Support Bar (A).