User Guide

051215-JA 5 www.elitescreens.com

Saker Tension Series | Controls and Accessories

A. IR Remote

B. RF Remote

C. Wall switch control box

D. 5-12 volt trigger cable

E. IR extended “eye” receiver

F. Wireless 5-12v trigger cable

G. AAA batteries

H. Bubble leveler

Screen operation

Electric Current: The screen operates on AC110V @ 60 Hz

1. Plug the screen’s power cord into a power outlet.

2. Once the screen has power, you’ll be able to control it using any of the 6 methods described below.

6 ways to control your Saker Tension

1. IR remote control (Item A, Fig 1): The Infrared functions by direct line

of sight contact with a beam range of 30 feet. Aim the IR remote at the

circular window located on the left side of the screen.

2. IR “Eye” Receiver (Item E, Fig 2): The IR “Eye” Receiver plugs

directly into the screen’s RJ-45 input to present a low profile line-of-sight

control option for your IR remote control even in a recessed ceiling

installation.

3. RF Remote Control (Item B): The radio waves eliminate the need for a

direct line of sight with a range of 100 feet.

Fig.2

Fig.3

STOP

DOWN

IR “eye” receiver

3 Way Wall Switch

(does not have IR sensor)

Fig.1

IR/RF remote

4. 3-Way Wall Switch (Item C, Fig 3): The 3-way wall switch

is a wall mount control box with an up/stop/down button and

plugs directly into the screen’s RJ-45 input.