User Guide

Rev. 060809-JA www.elitescreens.com 0

Tripod B

Series

Tripod Portable Projection Screen

USER’S GUIDE

Tripod Screen Parts Identification

Using the Screen

A. Setting up the screen:

Follow the steps below and Fig. 1 & 2.

1. Place the screen in an upright position (fig.1) with the

legs toward the ground.

2. Deploy the Tripod Support legs by pushing down on

the Tripod Junction.

3. Release the vertical locking mechanism by placing

the locking tab in an “up” position. Lift the vertical

extension bar up and turn the tripod’s screen casing to a

90° horizontal position so that the casing is now parallel

to the ground with the screen handle facing the bottom of

the top hook. Lock the vertical extension bar by placing

the tab in a “down” position.

4. Completely extend the legs as much as possible so

they are stable and position them away from objects that

may interfere with their balance. DO NOT stand the tripod on

an unstable platform to avoid an injury should the tripod screen collapse.

Top Hook, Keystone

Eliminator & Screen Handle

Vertical locking tab mechanism

Support beam

Vertical

Extension Bar

Screen Material

Screen case

Carrying handle & Screen height

adjustment lock/release tab

Tripod junction

Tripod Support Legs

End cap

Fig. 2

Fig.1

PAGE 1
Tripod B Series Tripod Portable Projection Screen USER’S GUIDE Tripod Screen Parts Identification Support beam Top Hook, Keystone Eliminator & Screen Handle Vertical Extension Bar Vertical locking tab mechanism Screen Material Carrying handle & Screen height adjustment lock/release tab End cap Tripod junction Screen case Tripod Support Legs Using the Screen 1 A. Setting up the screen: Follow the steps below and Fig. 1 & 2. 1. Place the screen in an upright position (fig.1) with the Fig.
PAGE 2
B. Preparing the tripod screen for projection: Follow the steps below and Fig. 3. 1. Pull the screen handle up vertically and hook the screen handle on the Top Hook. *Note: Use the Keystone Eliminator to prevent “Keystone Effect” from occurring. Keystone Effect is caused when a projector presents its image at a downward angle causing a trapezoid-shaped image to appear on the screen. The Keystone Eliminator is designed to eliminate that effect by angling the screen forward. 1 3 2 2.