Tab-tensioned Premium Electric Screen CineTension 2 Series Use r’s Gu i d e Rev. 102510-JA www.elitescreens.com info@elitescreens.
Important Safety and Warning Precautions 1. 2. Be sure to read this user guide before use and follow the procedures below. Please retain this manual for future reference. To avoid any damage, do not use in conjunction with any accessories not recommended by the manufacturer. Handle the device carefully during transportation to avoid damage. To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.
Warning The screen’s Top Black Drop is already set to its maximum drop distance. There is NO extra black drop in the roller. Please be aware of this as it will void the limitation of your warranty. Changes or modifications (except cutting the power cord for hardwire installation) to this product not expressly approved by Elite Screens is prohibited and will void the warranty.
2. Wall Box and IR (Infrared) Eye Receiver: The 3-way Wall Box switch enables the consumer to manually operate the screen's drop/rise capabilities. The IR “eye” protrudes from the bottom of the casing to present a low profile line-of-sight control option for your IR remote. It is a low-visibility alternative to using the wall box kit and its ability to protrude from the bottom of the screen allows line-of-sight control even in a recessed ceiling installation. Sensor 3-way Wall box switch Sensor 3.
INSTALLATION The CineTension 2 series screen is designed for installation on either a wall or ceiling. All hardware is included to allow either installation method however we do strongly recommend a professional installation for safety purposes. The extruded hanging brackets are designed to slide anywhere on the back of the screen to accommodate a wall or ceiling installation and provide an easy alignment with wood studs and trusses. Please follow the steps below for recommended installation instructions.
3. Mark the location of where the screen is to be installed and drill your hole. hole and finish tightening the bolts to the bracket. Insert the proper screw into the drilled Top hole for ceiling installation Back hole for wall installation 4. Examples of an installed CineTension 2 on a wall, ceiling and enclosed. Flush mount to wall Flush mount to ceiling Enclosed installation *Allow 2” of spacing between the front and back of the screen casing.
Remote Controls IR RF UP Stop Down This is the IR (Infra-Red) remote with a range of approximately 15 Ft. Battery size AAA This is the RF (Radio Frequency) remote with a range of approximately 100 Ft. Battery size AAA * Please remember to always point to either the IR “eye” sensor or the IR receiver located on the screen’s case using the IR remote. The IR remote can also work with a Universal Learning Remote Control usually by programming the Screens IR codes into your Universal Learning Remote.
If the electric screen does not move, please check the following: 1. Check the power supply first. The screen will understandably not move without power. 2. Make sure the power cord is firmly plugged to the power outlet. 3. Make sure that all cable connections are secure. 4. If the screen works well with the line switch but not with the remote control, please make sure the remote controls have fresh batteries or replace them with new ones.
Warranty Policy • Two (2) year warranty parts and labor from purchase date as follows (except for refurbished units as specified below) • Refurbished units carry a 90-day parts and labor warranty. • Each party will be responsible for one way shipping during the warranty period. • DOA (Dead On Arrival): Must be reported within 7 business days of receipt. An RMA (Return Merchandise Authorization) number must be issued in order to process a replacement.
Contacts US & Canada Tech Support & Warranty Claim Please contact us at service@elitescreens.com or call +1 877-511-1211 #3 Service Europe Tech Support & Warranty Claim Please contact us at service@elitescreens.eu or call +49-(0) 40-30392958 Asia Tech Support & Warranty Claim Please contact us at service@elitescreens.com.cn or call +86-(0) 755-8461-7989 Taiwan Tech Support & Warranty Claim Please contact us at service@elitescreens.com.
