User Guide

LED Light Kit for EDGE FREE™ Frame Screens

Part Numbers: ZLED84/92/100/110/120/135/150/180/200

Package contents

A. 72w controller

B. Power Supply

C. LED Strip

D. Power Cord

E. Remote Control

How to set up your LED kit

1. Lay EDGE FREE™ Frame flat on clean

surface (back facing).

2. Remove self-adhesive backing.

3. Adhere LED Strip all around the

rear side edge of Frame as

pictured. *

* For 110” Models - After the LED strip has been applied along the entire rear edge of the frame, there may be excess LED

lighting backlighting strip. You are able to remove any excess backlighting strip by simply cutting the strip along the

indicated line shown in image below:

Cut along this line

PAGE 1
LED Light Kit for EDGE FREE™ Frame Screens Part Numbers: ZLED84/92/100/110/120/135/150/180/200 Package contents A. 72w controller B. Power Supply C. LED Strip D. Power Cord E. Remote Control How to set up your LED kit 1. Lay EDGE FREE™ Frame flat on clean surface (back facing). 2. Remove self-adhesive backing. 3. Adhere LED Strip all around the rear side edge of Frame as pictured.
PAGE 2
4. Attach LED kit connections as shown in diagram and plug in the power cord into a wall outlet. Edge Free ™ Screen LED Strip connection 72w Controller Power Supply Power Cord Wall Outlet See following pictures for details of connecting the LED kit. LED kit connection 1. Connect LED Strip to 72w 2. Connected. 3. Plug in 72w controller 4. Plug in Power Cord Controller (align arrows). Remote Control Operation 1. Remote Control: Infrared 2.
PAGE 3
Brightness Up Green Brightness Dn Green Blue White For a local Elite Screens contact or Technical Support, please visit www.elitescreens.com www.elitescreens.