UNIVERSAL LEARNING REMOTE CONTROL MODEL: ZR800D USER GUIDE Ver. 1.1 www.elitescreens.com / eliteinfo@elitescreens.
Thank you for your purchasing the ZR800D universal remote control. It features the largest infrared code library for the American market. Based on our creative design, it has the easiest and fastest way to set up directly by the brand name and code number.
SET Start to set up (program) the remote control. LEARN Setting up learning functions. MACRO Sequence operation of your home theater. TV, DVD, SCR (SCREEN), VCR, PRO(PROJECTOR), SAT, AUX 1, AUX 2, Select the device you want to control Turns the device on and off 0-9 The number keys operate the same as your original remote control, and can also bused for entering device codes when setting up. Works like the enter key on your original remote.
5. Point ZR800D to the receiver window of screen control box and Press the or or OK (STOP) key to Check the function. ● Set Up(by Enter Code) for ELITE SCREEN 1. Be sure already Fixing the Elite Screen OK, be sure have Switched on the Screen. 2. In the back section of this manual, find the elite screen detailed type and code number(e.g. ELITE 7E02). 3. Press the SET key on ZR800D for more than 3 seconds, then release it. 4.
Remark: 1. To return to beginning status, press the EXIT key or the device key (e.g. TV, or VCR…) 2. You must point your remote control to the device that you want to control during when you test the keys. 3. The keys of OK, EXIT only used to set-up your new remote control during set up. You can’t control your device as normal menu function at this moment until you quit from set up. 4. If the device is locked, you must first unlock the device then setting up.
LCD remote control. Or you can learn all functions of your original remote control to the keys on the LCD remote control you want, and replace your original remote control. In learn mode, you must need to prepare a another original remote control that you will take the codes into your ZR800D. You can select LEARN KEY to learn commands, or DELETE KEY to delete learnt commands, or choose DELETE DEV to delete all commands under a device, or DELETE ALL for all learnt commands under all device in learn category.
Press a source key Power from original remote IF NO Remark: 1. A selected target key can be multi learnt from different sources key, ZR800D will store the final learnt signal only. 2. All usual function keys can be learnt except SHOW VIEW, ALL OFF, MACRO, DEVICE KEYS, LEARN etc.. 3. Some code form may not be learn by this remote control (due to the material cost limit.) 4. You can learn about 100 key totally for 8 devices key.
Select a key you delete want next to key delete IF NO Delete All Learnt Command For a Device If you like to delete all learnt commands in a device with one order instead of deleting every key one by one, please follow the below steps: 1. Press and hold the SET key for more than 3 seconds, then release it. 2. Scroll or key to LEARNING in the LCD menu, and then press the OK key and the LCD display LEARN KEY. 3. Scroll or key to DELETE DEV in the LCD menu and then press the OK key. 4.
Select a device you want to delete IF NO Remark: sometimes it can take about 3 minutes for delete all commands in one device. If the commands are not many, we suggest you delete commands one by one. Delete All Learned Keys If you like to delete all learnt commands in the unit, please follow the below steps: 1. Press and hold the SET key for more than 3 seconds, then release it. 2. Scroll or key to LEARNING in the LCD menu, then press the OK key, LCD shows LEARN KEY. 3.
● Other Set Up ☆1: Direct Set Up (by Brand and Code) (suitable for TV,DVD,VCR,AUX1.AUX2,SAT) 1. Turn on the device (e.g. TV) you would like to operate. If it is a VCR, Please insert a tape. 2. Press and hold the SET key on your remote control. Then press (simultaneously) one of the device keys (e.g. TV) 3. Then release them, the Brand will be displayed on the screen. 4. You can press the or key to select the brand of your device (e.g. your TV brand: Philips) 5.
Remark: 1. To return to beginning status, press the EXIT key or the device key (e.g. TV, or VCR…) 2. You must point your remote control to the device that you want to control during when you test the keys. 3. The keys of OK, EXIT only used to set-up your new remote control during set up. You can’t control your device as normal menu function at this moment until you quit from set up. 4. If the device is locked, you must first unlock the device then setting up.
+ Remark: 1. In case of you did not stop the search on time when device reacted, you may press the or key to search back to find the passed code.(for example, your DVD reacts when the digital is 048 on the LCD, but you do not press any key to stop the searching process synchronously, so the searching process goes on automatically. when you press any key to stop the searching process, now the digital number is already 050.
8. You check the function of the keys on remote control(such as the POWER or CH+…etc). If most keys on your new remote control do not function correctly, try another 3-digit device code (e.g. 004…) from the list under the same brand. Repeat steps 3 to 7 until all the basic functions operate correctly. ☆4: Set up Clock You can set up the clock on your R800D LCD remote control and the clock will be displayed on the screen. 1. Press and hold the SET key for more than 3 seconds, then release it. 2.
☆5: Volume Lock This function makes you very convenient when you only use one device to adjust volume. For example, you may use your amplifier as your main volume control, then you can use this function to fix the volume and mute key of AUX, no matter which device you will use (even you will use TV, DVD, VCR etc), the volume and mute key on remote control still control the volume and mute of your amplifier. 1. Press and hold the SET key for more than 3 seconds, then release it. 2.
Remark: You can only lock one device for volume and mute of your new remote control. The locked device will be unlocked when you lock on the other device automatically. ☆6:Device Lock You can use Device lock function to fix current device code and this device code cannot be changed by brand and code set up or auto search. You can set it to the “OFF” to quit from this function. 1. Press and hold the SET key for more than 3 seconds, then release it. 2.
Remark: You can fix all device codes and these device codes cannot be changed by neither Auto Search nor Brand Code Set up. ☆7: Background Light If the background light is on, the background light will be lighted up when you press any key. 1. Press and hold the SET key for more than 3 seconds, then release it. 2. Press the or key to select the C O N F I G U R E in the LCD menu, and then press the OK key. 3. Press the or key to select the L I G H T in the LCD menu, then press the OK key. 4.
☆8: Contrast Adjust If you are not satisfied the screen contrast of your remote control, you can use below steps to change it. 1. Press and hold the SET key for more than 3 seconds, then release it. 2. Press the or key to select the C O N F I G U R E in the LCD menu, then press the OK key. 3. Press the or key to select the C O N T R A S T in the LCD menu, then press the OK key. 4. Press the or key to adjust contrast level, and then press the OK key when you satisfied. 5.
☆9:Show View Function The ZR800D has a Show view function to scan all TV or SAT channels for your quick view. 1. Press the device key to select the device (such as TV) that you want to operate. 2. Press and hold the Show View key about 1 second. When the device’s LED flashes and it goes into Show View mode. The remote control automatically scans all channels for a brief quick view. Remark: 1. The remote control must be pointed at the device until Show View mode finished. 2.
which power signal is been sending. Remark: The remote control must be pointed to device that you like to control until the operation finished. ☆11:Macro Function Macro function let you make sequent operation for you home theater. Press and hold the MACRO key and digital number 1 key ( or 2,3 key), and then release them. The device LED will flash and the remote control will send out a sequent IR commands that you programmed before. You can set up a Macro by following below steps: 1.
TV+POWER+MUTE+AV +DVD+PLAY+ VCR+RECORD Remark: 1. You can set up to maximum 10 commands in a MACRO. 2. Be sure all the keys can send out signals, otherwise even if you programmed these keys inside the MACRO, if you still cannot work properly when you operate the MACRO function. You can check those keys by pressing them to see the relative Device buttons flash or not before you set up MACRO. 3. Be sure the device must have relative conditions when you operate MACRO function.
6. You can press any device key to finish the delete operation or press the EXIT key to last state and use or to select other set up. ☆13:Clear All Erase all the setting up data, and go back to the factory default settings. 1. Press and hold the SET key for more than 3 seconds, then release it. 2. Press the or key to select the C O N F I G U R E in the LCD menu, then press the OK key. 3. Press the or key to select the C L E A R A L L in the LCD menu, then press the OK key and LCD shows SURE CLEAR.
END Ver. 1.1 www.elitescreens.com / eliteinfo@elitescreens.
