Use and Care Manual

IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USE.
WARNING—To avoid the risk of electrical shock, always make sure the product is
unplugged from the electrical outlet before assembling, disassembling, relocating,
servicing, or cleaning it.
WARNING-To reduce the risk of fire, electric shock, or serious personal injury:
 Always unplug the product from the electrical outlet before relocating, servicing, or
cleaning it.
 Do not plug/unplug the product into/from the electrical outlet with a wet hand.
 Do not operate the product if the power cord is cut, damaged, or if the wires are
exposed.
 Keep the power cord and product away from heated surfaces, including stovetops.
 Do not immerse in or expose the base, power cord, or plug to water or other liquids.
Do not attempt to open any part of the base.
 To disconnect the product from an electrical outlet, pull directly on the plug; do not
pull on the power cord.
 Do not put any stress on the power cord where it connects to the product, as the
power cord could fray and break.
 If using an extension cord with this product, the marked electrical rating of the cord
set or extension cord must be at least as great as the electrical rating of the product.
 Keep hands and utensils out of container while blending. A scraper may be used
but only when the blender is not running.
 Do not operate the product if it has a damaged power cord or plug, malfunctions, or
is dropped or damaged. This product has no user-serviceable parts. Do not attempt
to examine or repair this product yourself. Only qualified service personnel should
perform any servicing; take the product to the appliance repair shop of your choice
for inspection and repair.
CAUTION-- To reduce the risk of personal injury or product/property damage:
 This product is intended for use in blending food products; do not use the product for
any other purpose.
 Keep the product out of the reach of children and pets. This product is not intended
for use by children.
 Do not leave the product unattended while it is in use, especially when children are
present. Extra caution is necessary when using this product near children. Always
unplug the product from the electrical outlet when it is not in use.
 Do not use attachments not recommended or not sold by the manufacturer or it may
cause risk of injury to persons.
 This product contains exposed sharp metal blades. Use extreme caution when
handling.
 Avoid contact with moving parts.
 Always operate blender with cover in place.
 Always operate the product on a flat, level, stable surface to avoid overturning it.
 Ensure the product is off before adding or removing parts. Do not attempt to place the
Glass jar onto the Base while the motor is running. Do not attempt to remove the
Glass jar from the Base while the motor is running.
 Correctly attach the blade assembly to the glass jar before putting the Glass jar onto
the Base. To reduce the risk of injury, never place cutter-assembly blades on the
base without glass jar properly attached.
 After operating continuously for three minutes, wait at least one minute before
operating the product again to help prevent the motor from overheating.
 Do not run motor while Glass jar is empty.
 This product is intended for indoor, non-commercial, non-industrial, household use
only. Do not use outdoors.
 Do not let cord hang over the edge of a table or counter.
 This product uses a short power cord to reduce the risk of personal injury resulting
from becoming entangled in or tripping over a longer cord.
WARNING: This product is equipped with a polarized plug (one blade is wider than the
other blade) to reduce the risk of electrical shock. This is a safety feature. The plug will
fit into a polarized outlet only one way. If you are unable to insert the plug into the
electrical outlet, try reversing the plug. If the plug still does not fit, contact a qualified
electrician. Never use the plug with an extension cord unless you can fully insert the
plug into the extension cord. Do not alter the plug. Do not attempt to defeat the safety
purpose of the polarized plug.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE