Use and Care Manual

CARE & MAINTENANCE
WARNING: Always ensure the product is unplugged from the electrical outlet before
relocating, assembling, disassembling, or cleaning it.
CAUTION: Before disassembling the product for cleaning, ensure the Blades have
completely stopped and use caution when attaching or detaching them, as they are
extremely sharp.
 Always clean the product immediately after each use. Wash all parts except the
Motor Housing in warm, soapy water and then rinse and dry thoroughly. Never
immerse the Motor Housing in water or other liquids. Never use abrasive cleaners on
any part of the product. Do not place any parts into a dishwasher or extremely hot
water.
 To disassemble the Glass jar for thorough cleaning, turn the Blade Base
counterclockwise and remove it, and then remove the Blades and the Gasket from
the Glass jar. Use a small brush (not included) to remove particles of food lodged
underneath the Blades. To reassemble, replace the Gasket and the Blades into the
bottom of the Glass jar, and then turn the Blade Base clockwise to tighten onto the
Glass jar (refer to the Parts illustration).
 Store the product in a cool, dry place.
CLEANING
1) Make sure the blender is unplugged.
2) Remove the cutting unit assembly. Handle with care, blades are sharp.
3) Wash the cover, jar, gasket, blades and retaining ring in hot soapy water.
4) Rinse and dry.
5) Reassemble the parts. Store away with the cover ajar to prevent container odor.
TIPS
1) If blending action stops at any time, immediately turn the unit OFF. Remove the
cover and use a rubber spatula or wooden spoon to push the mixture toward the
blades. Replace the cover and continue blending process.
2) Do not store food in the blender jar.
3) This blender does not mash potatoes, whip cream, mix stiff dough or grind
meats.