Use and Care Manual

HOW TO USE

1. Before plugging in your new burner, check to see that the electric circuit

is not overloaded with other appliances. This unit should always be

operated on a separate 120Volt

AC outlet.

2. Be certain that your unit is set

on a leveled, flat, heat resistant

surface. Also, avoid using pans

that are unstable and easily tipped.

3. Place pan on heating element.

4. Turn the temperature control knob to the

desired heat setting. The power indicator

light of the switch will glow indicating

that the heating element is turned on

and heating will begin immediately.

CAUTION: NEVER touch the

heating elements while the burner is

in operation. Doing so will lead to serious

personal injury.

5. When cooking is complete, turn the temperature control knob back to the

"OFF" position.

6. If the burner is not to be in use for a long period of time, it is highly

recommended to unplug the unit from the outlet. This prevents any

accidental burns or injury.

7. When all parts have thoroughly cooled, be sure to clean the burner. Dry

all parts thoroughly before storing or operating the burner.

CLEANING AND MAINTENANCE

 Wipe off the base and heating element with

a damp soapy cloth.

CAUTION: NEVER immerse the base

in water or any other liquid

 Thoroughly clean and dry all parts.

 DO NOT USE ANY ABRASIVE SOAPS,

DETERGENTS, OR CLEANING MATERIALS

TO CLEAN THE BURNER.

 Any other servicing not recommended by the

manufacturer may cause hazards and should

be performed by an authorized