2 CUP FOOD PROCESSOR Model: EFP-7730A INSTRUCTION MANUAL Before operating your new appliance, please read all instructions carefully and keep for future reference.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock do not immerse cord, plugs or appliance in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning. 5. Avoid contacting moving parts. 6.
IMPORTANT SAFEGUARDS (CONT.) 27. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 28. Only use the appliance for its intended domestic use. 29. Before plugging in, make sure your electricity supply is the same as the one shown on the underside of your machine.
SHORT CORD PURPOSE NOTE: A short power cord is provided to reduce the risk of personal injury resulting from becoming entangled in or tripping over a longer cord. Longer power-supply cords or extension cords are available and may be used if care is exercised in their use.
PARTS IDENTIFICATION 9 10 11 12 13 14 Processor 1. Main base 2. Center post 3. Workbowl 4. Cover 5. Feed Chute 6. Food Pusher 7. Locking mechanism 8. Control Knob www.maxi-matic.com Attachments 9. Kneading dough blade 10. Chopping blade 11. Reversible thick slicing/coarse shredding disc 12. Citrus juice press 13. Accessory holder 14. Emulsifier 4 info@maxi-matic.
CONTROL PANEL The controls are located on the front of the base (1). Turn dial to P, 1 or 2 in order to select a function (see directions under "How to Use"). OFF CONTROL Processor should be stored in OFF position (0) and unplugged when not in use. PULSE CONTROL Use PULSE (P) for short processing tasks. This lets you control the size and uniformity of foods being chopped. The dial must be turned to the P position and held for the appliance to operate in PULSE mode.
HOW TO USE YOUR FOOD PROCESSOR ASSEMBLING THE PROCESSOR HOW TO INSERT AND REMOVE THE CENTER POST The center post (2) is removable. When you are ready to use the food processor, place the center post into the smaller opening in the main base (1). HOW TO LOCK THE WORKBOWL INTO POSITION 1. Attach center post to workbowl (3). Place the workbowl on the base with handle turned to the right of the locking mechanism (7) over the unlock symbol. 2.
NOTE: Remove workbowl from appliance before removing the chopping blade to prevent food from leaking through the center opening of the workbowl. Carefully remove the chopping blade. Unplug appliance when not in use. HELPFUL TIPS FOR CHOPPING Watch carefully to avoid over-processing foods. The PULSE position offers the best control. For best results, process foods that are about the same size. Do not overload the workbowl. Never walk away from the processor while it is on.
HOW TO SLICE OR SHRED IN THE WORKBOWL 1. Lock workbowl into position. 2. Carefully place reversible slicing and shredding disc on top of center post with appropriate side up (depending on work to be done). (See d & e). d e 3. 4. 5. 6. 7. 8. CAUTION: The slicing and shredding disc is very sharp. Use caution when handling and storing. Place cover on workbowl and lock into place by rotating cover counterclockwise. Fill feed chute with food. Position food pusher over food. (See f & e).
After food has been processed, remove the cover and invert on countertop. Remove the slicing and shredding disc before removing the workbowl from the processor. Place the disc on top of the inverted workbowl cover. HOW TO USE THE KNEADING/DOUGH BLADE 1. Lock workbowl into position. 2. Place dry ingredients in the workbowl and add liquid down the feed chute while the machine is running. 3. Process until a smooth elastic ball of dough is formed, this will take 30-90 seconds. 4.
SPEED GUIDE Tool/Attachment Function Speed Maximum Capacities Chopping Blade Chop onions, nuts, meta, parmesan cheese 2 500g meat Kneading/Dough Blade Knead yeast dough for bread and pizzas 2 500g flour + 320g water Slicing/Shredding Disc Slice carrots, cucumbers or salami.
If washing in a dishwasher, place removable parts on top rack only – not in or near utensil basket. Some staining of parts may occur. If so, make a paste of 2 tablespoons of baking soda and 1 tablespoon of water. Apply to stains and let stand overnight. Rinse and dry. Do not use rough scouring pads or cleansers on any plastic or metal parts to clean. Do not allow chopping blade or slicing and shredding disc to soak in water for long periods of time.
LIMITED WARRANTY* ONE (1) YEAR 1. 2. 3. 4. 5. 6. 7. WARRANTY IS ONLY VALID WITH A DATED PROOF OF PURCHASE Your small kitchen appliance is built with precision, inspected and tested before leaving our factory. It is warranted, to the original purchaser to be free from any manufacturing defects under normal use and conditions for one (1) year, cord excluded. This Warranty applies only to the original purchaser of this product.
RETURN INSTRUCTIONS RETURNS: A. B. Any return of defective merchandise to the manufacturer must be processed accordingly by first contacting customer service (contact information shown below) to obtain an RA # (Return Authorization Number). We will not accept any returns of merchandise without an applicable RA #. IMPORTANT RETURN INSTRUCTIONS. Your Warranty depends on your following these instructions if you are returning the unit to Maxi-Matic USA: 1.
