Instructions / Assembly

ASSEMBLY INSTRUCTIONS (cont.)

TO REMOVE THE PLATES

1. Ensure the unit is unplugged and has cooled down completely.

2. Adjust the Grill & Griddle to open flat position.

3. Locate the plate release buttons.

4. Press the plate release button, plate will pop up slightly from the base.

5. Lift the plate up and slide out from under the brackets in the center.

6. Repeat by pressing the lower release button and release lower plate.

HOW TO USE YOUR 5-IN-1 GRILL & GRIDDLE

1. Ensure the plates are properly installed.

2. Insert the plug into a wall outlet.

3. Set desired temperature by turning the temperature knob.

4. Set the desired cooking time by turning the timer knob.

NOTE: The timer must be set to power on the Grill & Griddle.

5. The red Power light will illuminates.

6. Allow the Grill & Griddle to preheat until the green Ready light illuminates.

NOTE: the green Ready light will cycle on and off during the cooking process

indicating that the correct temperature is being maintained.

7. When the Grill & Griddle has preheated, place the foods to be cooked onto the

cooking plates.

CAUTION: Always exercise caution when handling the Grill & Griddle during cooking,

as the housing will become hot during use.

8. After you finished cooking. Turn the timer knob to “0” position to turn off the unit.

9. Allow the Grill & Griddle to cool down completely before handling.

Questions? We're here to help! Visit: www.maxi-matic.com for support on this product.