Use and Care Manual

5
ed iron, stainless steel, flat-bottom pans / pots with bottom
1) Usable cookware
Steel, cast iron, enamel
diameter from 5 inches to 6 inches.
Enameled Iron Iron or Enameled Cast iron Pan Iron Pot Deep-Fry Pan Stainless Steel Pot Iron Plate Pot Iron Pot
) Non-usable cookware
ceramic container, copper, aluminum pans/pots.
R
2
Heat-resistant glass,
ounded-bottom pans/pots with bottom measuring less than 5 inches.
Rounded Bottom Aluminum Bottom Measuring Pot with Stands Ceramic Pot Heat-Resistant
Pot Copper Pot Less than 12cm Glass Pot
CARE & MAINTENANCE
• Do n e an
on cooker, its cables or the plug into water or other
the glass cooker with a damp cloth or use a mild, non-abrasive soap
the casing and the operating panel with a soft cloth or a mild
oil based cleansing products in order not to damage the plastic
new, make sure that the bottom of your
oring it in a cool, dry place.
Remove the power plug prior to cleaning the induction cooker. ot us y
abrasive cleaning agents and make sure that water does not penetrate inside
the induction cooker.
• Never immerse the inducti
liquids.
• Wipe off
solution.
• Wipe off
detergent.
• Do not use any
parts or the casing/operating panel.
• In order to keep your cooker looking
cookware does not scrape the glass surface.
• Make sure to properly clean the unit before st
TROUBLESHOOTING
tion cooker malfu
ed
OR CODE PROBABLE CAUSE
Should the Induc nction a number error codes will flash on the power
setting display to help you to understand the nature of the fault. The error codes are list
below:
ERR
0 The Electronic Circuitry has a fault
1 No Pan or the Pan is not compatible
2 Over temperature
3 The Mains Supply voltage is too high
LIMITED WARRAN Y* ONE (1) YEAR T