Use and Care Manual

OPERATING INSTRUCTIONS (CONT.)
HOW TO USE THE
D
D
E
E
L
L
A
A
Y
Y
T
T
I
I
M
M
E
E
R
R:
If you wish to Program your pressure cooker to automatically cook prepared food at a
later time, you can program the pressure cooker to delay cooking by up to 24-hours.
(*See Notes & Tips #7). This setting is used in combination with the MENU BUTTON
SELECTIONS in the chart shown on page 14 and with the PRESSURE COOK TIME BUTTON.
1. Prepare desired food and place into cooking pot.
2. Secure the Lid (2) onto the unit, turn it Counter-clockwise to lock it in place.
3. Make sure the Pressure Limiting Valve (3) is set to the “Airtight” position.
4. Plug the power cord into a 120V power outlet.
5. The LED screen will display 00 00.
6. Press the DELAY TIMER button. The LED screen will show 0:30 which is equal to 30
minutes of delay time. Pressing it once for each additional 0.5-hour or hold for rapid
increase. The maximum Delay period is 24-hours in half-hour increments. Pressing
the delay timer button again after reaching the 24-hour setting will automatically
reset the delay timer to zero. (The time that displays on the LED screen shows how
long the user wants the unit to wait before the cooking process begins.)
7. EX: If you wish to program the pressure cooker to automatically turn on
in 3-hours, press the DELAY TIMER button until the LED screen displays 3:00).
8. After programming a Delay time of 3 hours, choose your MENU BUTTON or
PRESSURE COOK TIME.
MENU SELECT BUTTONS:
 Select one of the 8 Pre-Set MENU BUTTONS.
 Once you have selected your desired function, the pressure cooker will count
down the delay time of 3 hours and then start cooking.
PRESSURE COOK TIME:
 Press the BEANS button and then the PRESSURE COOK TIME button to reach the
desired cook time. Follow the instructions under "How to use the PRESSURE
COOK TIME button."
 Once the desired DELAY TIME and PRESSURE COOK TIME are selected, the DELAY
TIMER indicator light and the BEANS button will illuminate and the unit will
begin to countdown 3 hours until cooking begins.
1. Once the pressure cooker completes its countdown, the unit will begin to pressurize
and follow the cooking sequence for the chosen PRESSURE COOK TIME selection.
2. When cooking is complete, the pressure cooker will beep 3-times and automatically
go to KEEP WARM. The display will show bb during KEEP WARM.
3. The KEEP WARM indicator light will illuminate. This indicates the Pressure Cooker is
Naturally Releasing the pressure. (See Notes & Tips #6 regarding pressure release
and opening the lid).
www.maxi-matic.com
17
[e-mail]