TABLE OF CONTENTS IMPORTANT SAFEGUARDS 2 SHORT CORD PURPOSE & POLARIZED PLUG 3 PARTS IDENTIFICATION 4 HOW TO USE YOUR ICE MAKER 5 CLEANING & MAINTENANCE 7 TROUBLESHOOTING 8 MORE SPECIAL TIPS & GUIDES 10 WARRANTY & CUSTOMER SERVICE 11 RETURN INSTRUCTIONS 12 WARNING DO NOT TOUCH THE EVAPORATOR WHILE THE UNIT IS IN USE OR DURING THE ICE MAKING PROCESS. IT MAY CAUSE SEVERE BURNING. DO NOT MODIFY THE POWER CORD UNDER ANY CIRCUMSTANCES TO ALLOW THE UNIT TO BE PLUGGED INTO A NON-GROUNDED OUTLET.
IMPORTANT SAFEGUARDS The Elite Brand takes consumer safety very seriously. Products are designed and manufactured with our valued consumers' safety in mind. Additionally, we ask that you exercise a level of caution when using any electrical appliance by following all instructions and important safeguards. READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE When using an electrical appliance, basic safety precautions should always be followed, including the following: 1.
SHORT CORD PURPOSE NOTE: A short power cord is provided to reduce the risk of personal injury resulting from becoming entangled in or tripping over a longer cord. Longer power-supply cords or extension cords are available and may be used if care is exercised in their use.
PARTS IDENTIFICATION Evaporator Rods 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Silicon Water Drain Stopper - For draining water from the water reservoir. Water Reservoir - holds up to 1.7L of water. Compressor Power Cord Top Lid Viewing Window Back Top Cover Control Panel - Easy to use, visible functions and 1-touch display setting. Water Tray Evaporator Rods Ice Case Panel - The panel that pushes already formed ice into the Ice Basket.
PARTS IDENTIFICATION Control Panel Operation SIZE S (SMALL) or L (LARGE): Press to select the size of ice to make. Choose between size Small and Large. ON/OFF: Press to power unit on or off. ADD WATER: This light will turn on along with a beep indicator when the water level is too low. You will need to add water to the Water Reservoir and press the „Power‟ button twice to restart the ice maker.
HOW TO USE YOUR ICE MAKER (cont.) This unit should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which plugs into a standard three prong wall outlet to minimize the possibility of electric shock. 1. 2. Plug your appliance into its own, properly installed, grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord.
CLEANING AND MAINTENANCE 1. 2. 3. 4. Remove the ice basket. Unplug the Drain Stopper to drain out all water inside. Clean the interior with diluted detergent, warm water and a soft cloth. Clean the exterior of the ice maker regularly with a mild detergent solution and warm water. 5. Dry the interior and exterior with a soft cloth. Note: Make sure all parts are thoroughly dry before reassembling your unit. Insert the Drain Stopper back into the Ice Maker. 6.
TROUBLESHOOTING PROBLEM Indicator lights are on but display is not on. “Ice Full” indicator is on. The compressor works abnormally with a buzzing noise “Add Water” indicator light is on. The ice made is too large and cubes are sticking together. “Add Water” & “Ice Full” indicators both light up. Machine keeps running but the water is warmer than the normal temperature. POSSIBLE CAUSE SOLUTION Blown fuse/ No power. Replace fuse/ Turn power on. Ice basket is full. Remove ice from ice basket.
Ambient temperature or water temperature in inner tank is too high. Please operate the ice maker below ambient temperature of 90°F and use cold water. Ice making cycle is normal but no ice is made. Refrigerant liquid leakage. Consult a qualified technician. Pipe in the cooling system is blocked. Consult a qualified technician. Ice Maker is leaking water The drain stopper may be not be inserted properly. Check the drain stopper. Location of appliance may cause temperature changes.
MORE SPECIAL TIPS AND GUIDES • • • • • • Leaking Water: • Rubber Drain Stopper may be missing or not inserted properly. If missing, please contact customer service for a replacement rubber insert. • Check if unit still leaks water when power is unplugged. If unit does not leak water when power is unplugged then the water is leaking from the water pump. Please contact customer service for a replacement water pump.
LIMITED WARRANTY* ONE (1) YEAR WARRANTY IS ONLY VALID WITH A DATED PROOF OF PURCHASE PLEASE DO NOT RETURN TO STORE OF PURCHASE. If you have any problems with this unit, contact Customer Service for support. 1. 2. 3. 4. 5. 6. 7. 8. Your small kitchen appliance is warranted to the original purchaser to be free from any manufacturing defects under normal use and conditions for one (1) year, cord excluded. This Warranty applies only to the original purchaser of this product.
RETURN INSTRUCTIONS RETURNS: A. B. Any return of defective merchandise to the manufacturer must be processed accordingly by first contacting customer service (info@maxi-matic.com) to obtain an RA # (Return Authorization Number). We will not accept any returns of merchandise without an applicable RA #. IMPORTANT RETURN INSTRUCTIONS. Your Warranty depends on your following these instructions if you are returning the unit to Maxi-Matic, USA: 1.
