electric gate operators spec sheets
electric gate operators section 02829 PART 1 GENERAL 1.1 SECTION INCLUDES A. 1.2 1.3 D. Electric Gate Operators: 1. Residential/Commercial Light Duty DC swing gate operator. (LiftMaster / Chamberlain / Elite RSW12V RoboSwing) 2. Residential linear swing gate operator. (Chamberlain / LiftMaster LA 400 Series) 3. Residential solar linear swing gate operator. (Chamberlain / LiftMaster LA 412 Series) 4. Residential linear swing gate operator. (LiftMaster / Chamberlain / Elite Miracle-One) 5.
electric gate operators section 02829 1.4 1.5 SUBMITTALS A. Submit under provisions of Section 01300. B. Product Data: Equipment list, system description, electrical wiring diagrams for installation, and manufacturer’s data sheets on each product to be used, including: 1. Preparation instructions and recommendations. 2. Storage and handling requirements and recommendations. 3. Installation methods. C.
electric gate operators section 02829 E. Warranty: Manufacturer’s standard limited lifetime warranty against material and manufacturing defects. PART 2 PRODUCTS 2.1 2.2 MANUFACTURERS A. Acceptable Manufacturer: LiftMaster / The Chamberlain Group, Inc.; 845 Larch Avenue, Elmhurst, IL 60126-1196. ASD. Tel: (800) 282-6225. Fax: (630) 993-6024. Email: specs@ liftmaster.com. Web: www.liftmaster.com. B. Substitutions: Not permitted. C.
electric gate operators section 02829 7. UL 312 and UL 991 Listed. B. Chassis: 1/4 inch (6 mm) gold yellow zinc dichromate-plated steel chassis. C. Operator Enclosure: High density polyethylene plastic with a stainless steel access door. D. Operator Motor: 12V DC motor and plug-in transformer; provides up to 250 operating cycles per day. E. Operator Motor: 12V DC motor provides for varying number of operating cycles per day, depending on available solar power. 1.
electric gate operators section 02829 2.3 RESIDENTIAL LINEAR SWING GATE OPERATOR A. Chamberlain / LiftMaster LA 400 Residential Linear Gate Operator: Residential 24V DC linear swing gate operator for single linear actuator arm; for open inside/ close outside or open outside/close inside operation of swing gates up to 550 lbs. (250 kg) and lengths to 16 feet (5 m) for each leaf. 1.
electric gate operators section 02829 4. 5. 6. C. input; 1 Relay; 1 Channel; automatic frequency settings, automatic sensitivity levels; low power current draw; compact size. Hardware: Chamberlain / LiftMaster Elite Series Power Hinge; pair, double 5/8 (16 mm) ball bearings for smooth operation; 3/4 inch (19 mm) solid stainless steel shaft; continuous cycle operation, self-lubricating/ no grease fittings; unique design so the gate never hits the post. a.
electric gate operators section 02829 D. Chamberlain / LiftMaster LA 400-S Residential Linear Gate Operator: Residential 24V DC linear swing gate operator for master/second applications; second linear actuator arm; junction box and direct burial cable; for open inside/close outside or open outside/close inside operation of swing gates up to 550 lbs. (250 kg) and lengths to 16 feet (5 m) for each leaf. 1.
electric gate operators section 02829 operation when power is restored; battery backup shall provide complete operation of the gate operator and all DC control devices and sensing devices, including all sensing loops, to insure proper and expected operation of the barrier gate system in the event of a power loss; battery charging shall be accomplished by an integral regulated battery management system that maintains proper battery levels to insure no disruption in service in the event of line power failure
electric gate operators section 02829 2. 3. 4. Hardware: Chamberlain / LiftMaster Elite Series Power Hinge; pair, double 5/8 (16 mm) ball bearings for smooth operation; 3/4 inch (19 mm) solid stainless steel shaft; continuous cycle operation, self-lubricating/ no grease fittings; unique design so the gate never hits the post. a. Powerhinge: For use on steel gates with steel mounting posts; weight capacity 3,000 lb (1361 kg) per pair. b.
electric gate operators section 02829 2.5 G.
electric gate operators section 02829 a. 5. 6. 7. 8. 9. 10. Powerhinge: For use on steel gates with steel mounting posts; weight capacity 3,000 lb (1361 kg) per pair. b. Powerhinge2: For use on aluminum gates with steel mounting posts; weight capacity 1,000 lb (453 kg) per pair. c. Powerhinge3: For use on aluminum gates with aluminum mounting posts; weight capacity 1,000 lb (453 kg) per pair. Mounting: Chamberlain / LiftMaster MPEL Mounting Plate; for post mounting.
electric gate operators section 02829 2.6 G. Gear Reduction: 1530:1 gear reducer in synthetic oil bath. H. Control Circuit: Microprocessor (RISC) electronics and solid-state control board; low-voltage control inputs provide for connection of optional external devices including loop detectors, access control systems, and radio receivers. I. Additional Required Controls: 1. Integrated plug-in module Internally-mounted 312 HM radio receiver. 2.
electric gate operators section 02829 6. 7. 8. 9. Heater: Chamberlain / LiftMaster MA201 Thermostat Control Heater; designed to automatically maintain a suitable temperature inside a control enclosure for temperatures below 32 degrees F (0 degrees C). Pedestals: PED42 Pedestal; 42 inches (1067 mm) high; mounts to pre-existing concrete pad; 11 gauge steel construction; power coated black; 2 inch x 2 inch (51 mm x 51 mm) square post; faceplate with universal hole pattern. Includes hardware.
electric gate operators section 02829 I. 2.7 Equipment: Provide the following optional equipment. 1. Sequenced Access Management System providing ability to control a slide gate operator in tandem with a barrier gate operator. 2. Programmable output relay. 3. Radio receivers. 4. Remote controls. 5. Heater kit: a. 150 watt. b. 500 watt. COMMERCIAL SWING GATE OPERATORS A. Chamberlain / LiftMaster / Elite CSW200UL High-Traffic Commercial Swing Gate Operator: For gates up to 600 lbs. (272 kg) and 18 ft.
electric gate operators section 02829 B. Chamberlain / LiftMaster / Elite CSW200ULST High-Traffic Commercial Swing Gate Operator: For gates up to 600 lbs. (272 kg) and 18 ft. (5 m) in length with a traveling speed of 13 to 15 seconds for a 90 degree opening. 1. Loop Detector: Chamberlain / LiftMaster Elite Series AELD Loop Detector; plugIn detector, no wiring needed.
electric gate operators section 02829 3. 4. 5. 6. 7. D. continuous cycle operation, self-lubricating/ no grease fittings; unique design so the gate never hits the post. a. Powerhinge: For use on steel gates with steel mounting posts; weight capacity 3,000 lb (1361 kg) per pair. b. Powerhinge2: For use on aluminum gates with steel mounting posts; weight capacity 1,000 lb (453 kg) per pair. c. Powerhinge3: For use on aluminum gates with aluminum mounting posts; weight capacity 1,000 lb (453 kg) per pair.
electric gate operators section 02829 5. 6. 7. security for a gate as it automatically locks and unlocks as the gate is activated to open and close. 12 VDC power input; 1,300 lb (589 kg) holding force. Includes transformer, junction box with knockouts, pivoting armature, mounting plate and hardware. Provide Q400MAU relay module.
electric gate operators section 02829 2.8 K. Additional Required Controls: 1. Internally-mounted RF receiver tuned at 315 MHz for use with LiftMaster DIP switch, billion code, and Security+ remote controls. 2. Inherent obstruction sensing providing a slight reverse/full stop if an object is contacted while opening or a complete reopen if an object is contacted while closing. 3.
electric gate operators section 02829 3. 4. 5. 6. 7. levels; manual frequency override; low power draw, compact size. Hardware: Chamberlain / LiftMaster Elite Series Power Hinge; pair, double 5/8 (16 mm) ball bearings for smooth operation; 3/4 inch (19 mm) solid stainless steel shaft; continuous cycle operation, self-lubricating/ no grease fittings; unique design so the gate never hits the post. a. Powerhinge: For use on steel gates with steel mounting posts; weight capacity 3,000 lb (1361 kg) per pair.
electric gate operators section 02829 loops, to maintain normal operation of the swing barrier gate system in the event of a power loss; gate(s) open on power failure when user selected on control board with a 15 second delay; battery charging shall be accomplished by an integral regulated battery management system that maintains proper battery levels to insure no disruption in service in the event of line power failure. 1.
electric gate operators section 02829 2.9 COMMERCIAL SLIDE GATE OPERATORS A. Chamberlain/Elite SL3000UL High-Traffic Commercial Slide Gate Operator: Operator for gates up to 1000 lbs. (454 kg) and 37 ft. (11 m) in length with a traveling speed of up to 12 inches (305 mm) per second. 1. Loop Detector: Chamberlain / LiftMaster Elite Series AELD Loop Detector; plugIn detector, no wiring needed.
electric gate operators section 02829 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. C. Loop Detector: Chamberlain / LiftMaster Elite Series AELD Loop Detector; plugIn detector, no wiring needed. 24VDC power input; 2 Relays; 1 Channel; 4 frequency settings, 2 sensitivity levels with boost feature for high-profile vehicles; designed for and tested with SL3000ULDM operators.
electric gate operators section 02829 3. 4. 5. 6. 7. 8. 9. 10. 11. b. AH110: 6 inch (152 mm) wheel; 1 piece; 5,000 lb (2268 kg) weight capacity. Hardware: Chamberlain / LiftMaster Elite Series Wheel Covers; CVRPWST4; 4 inch (102 mm) wheel cover; 2 pieces wheel covers guard against pinch points to meet ASTM standards and ensure UL325 compliance. Steel construction; power coated black; manufactured exclusively for use with the Power Wheel.
electric gate operators section 02829 H. Gear Reduction: 30:1 gear reduction using worm-gear in synthetic oil bath with a solenoidactivated brake system that prevents back-driving. I. Control Circuit: OmniControl solid-state control board; low-voltage control inputs to provide for connection of a full range of optional external devices including loop detectors, access control systems, and radio receivers. 1.
electric gate operators section 02829 a. b. c. d. e. 4 inch (102 mm). 5 inch (127 mm). 6 inch (152 mm). Cold-rolled, heat treated steel. Gold zinc-plated. 2.10 EMERGENCY ACCESS SLIDE GATE OPERATORS A. Chamberlain/Elite SL3000ULE3: High-traffic commercial slide gate operator with emergency access, for gates up to 1000 lbs. (454 kg) and 37 ft. (11 m) in length with a traveling speed of up to 12 inches (305 mm) per second. 1.
electric gate operators section 02829 11. Emergency: Chamberlain / LiftMaster ACP17 Fire Access Box. B. Chamberlain/Elite SL3000ULDCE3: High temperature rated, dual motor, commercial slide gate operator with emergency access, for gates up to 800 pounds (363 kg) and 37 feet (11 m) in length with a traveling speed of up to 12 inches (305 mm) per second. 1. Loop Detector: Chamberlain / LiftMaster Elite Series AELD Loop Detector; plugIn detector, no wiring needed.
electric gate operators section 02829 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. In detector, no wiring needed. 24VDC power input; 2 Relays; 1 Channel; 4 frequency settings, 2 sensitivity levels with boost feature for high-profile vehicles; designed for and tested with SL3000UL1HPE3 operators. Hardware: Chamberlain / LiftMaster Elite Series Power Wheel; solid cold-rolled steel; gold zinc plated; continuous cycle operation; maintenance free. a.
electric gate operators section 02829 G. Operator Motor: 1. One 1/2 HP instant reversing 120VAC continuous duty gear-driven motor. Motor shall be able to be back-driven manually for emergency access during a power outage. Locate an emergency release button that disconnects and resets the operator on front cover of the gate operator. 2. Two 1/2 HP instant reversing 120VAC continuous duty gear-driven motors. One motor opens the gate, the other motor closes the gate.
electric gate operators section 02829 K. Mounting: Capabilities to provide flexibility in determining orientation of operator either prior to or during installation. L. Electronic Motor Disconnect: Prevents operation of the motor while under manual operation. M. Accessory Power: 120 V AC power receptacle (NEMA 5-15). N. Equipment: Provide the following optional equipment. 1. Gearbox heater. 2. Power Backup: Model DC2000. 3. Integrated loop detector. 4. Post mounting plate. 5.
electric gate operators section 02829 7. 8. 9. 10. junction box with knockouts, pivoting armature, mounting plate and hardware. Provide 912B relay module. Heater: Chamberlain / LiftMaster MA201 Thermostat Control Heater; designed to automatically maintain a suitable temperature inside a control enclosure for temperatures below 32 degrees F (0 degrees C).
electric gate operators section 02829 3. 4. 5. 6. 7. 8. J. closed directions, allowing a closing gate to reverse to open and an opening gate to stop and reverse 2 seconds. Soft start/stop capabilities providing extended gate system life. Dynamic electronic braking to provide gate position control and ensure consistent gate closing without coasting. Wireless or twisted pair Dual gate operation capabilities to allow two separate gate operators to operate in unison at a single entrance.
electric gate operators section 02829 C. Motor: High-starting torque, continuous-duty, industrial-type protected against overload by current sensing or thermal overload device. D. Motor Starter, Controls, Enclosures: 115V motor, UL approved microprocessor solid-state. Motor control device shall be enclosed in NEMA 1 enclosure integral with operator. Control enclosures shall conform to ANSI/NEMA ICS 6. A NEMA Type 1 with OPEN/CLOSE/STOP control station. 1.
electric gate operators section 02829 L. Equipment: Provide the following optional equipment. 1. Photo-Eyes: Commercial Protector System (CPS) non-contact photo safety sensor that senses an obstruction and signals the operator to reverse to open. 2. Sensing Edge: Electric or pneumatic sensing device installed on the bottom edge of the gate to sense an obstruction and signal the operator to stop and reverse to open. 3. Treadle: Signals the gate to open or close when a vehicle drives over the treadle. 4.
electric gate operators section 02829 8. 9. 10. 11. designed to automatically maintain a suitable temperature inside a control enclosure down to -40 degrees F (-40 degrees C). Adjustable from 30 degrees to 120 degrees F (0 degrees to 50 degrees C). Used on operators 115V and 575V. Heater: Chamberlain / LiftMaster 6532448 Thermostat Control Heater, Fin Type; designed to automatically maintain a suitable temperature inside a control enclosure down to -40 degrees F (-40 degrees C).
electric gate operators section 02829 voltage control, external spike and surge protection, separate open and close external sensor inputs, fully adjustable inherent obstruction detection system, dual gate operation, built-in radio receiver, and optional external devices including loop detectors and telephone entry systems. G. Additional Required Controls: 1. Internally-mounted RF receiver tuned at 315 MHz. 2.
electric gate operators section 02829 2.14 HEAVY DUTY HYDRAULIC SLIDE GATE OPERATORS A. Chamberlain/Lift Master HS 670 Heavy Duty Hydraulic Model GC: Continuous-cycle 1 HP operator for gates up to 3000 pounds (1361 kilograms) and 80 feet (24 meters) in length with a traveling speed of up to 12 inches (305 mm) per second. 1. Photo Eye: Chamberlain / LiftMaster CPS-N4 Thru-beam Photo Eyes; safety equipment is recommended by UL325 to protect entrapment areas.
electric gate operators section 02829 5. 6. 7. Locks: Heater: Pedestals: C. UL Classification: 1. Conforms to Class I, when tested in accordance with UL325. 2. Conforms to Class II, when tested in accordance with UL325. 3. Conforms to Class III, when tested in accordance with UL325. 4. Conforms to Class IV, when tested in accordance with UL325. D. Operator Enclosure: Powder-coated, weatherproof, locking, 14 gauge galvanized steel cabinet over a metal frame. E. Operator Motor: 1.
electric gate operators section 02829 8. 9. 10. 11. Dual gate operation 2-wire control system that provides for the operation of two separate gate operators in unison at a single entrance and also provides the ability to connect accessories to either operator. Automatic Closing Timer: Timer-to-close providing adjustable timer settings between 1 and 180 seconds which resets upon receiving any additional open commands.
electric gate operators section 02829 5. 6. 7. 8. 9. 10. 11. manufactured exclusively for use with the Power Wheel. Hardware: Chamberlain / LiftMaster VTRACK V-Track; 10 ft (3048 mm) length by 4 inch (102 mm) width; unpainted, 12 gauge hot-dipped galvanized steel construction; single piece design, 90 degree rounded angle top; multiple anchoring holes for ease of installation.
electric gate operators section 02829 2. g. 575 VAC 60 Hz Three Phase operation. 1 HP Continuous Duty motor with built-in overload protection for gates up to 1800 lbs. (816 kg) and 50 ft. (15 m) overhead or 32 ft. (10 m) cantilever in length. a. 15 VAC 60 Hz Single Phase operation. b. 208 VAC 60 Hz Single Phase operation. c. 230 VAC 60 Hz Single Phase operation. d. 208 VAC 60 Hz Three Phase operation. e. 230 VAC 60 Hz Three Phase operation. f. 460 VAC 60 Hz Three Phase operation. g.
electric gate operators section 02829 I. Emergency Release: External manual hydraulic release for manual operation of gate during emergencies and maintenance work. J. Emergency Stop: Stop button in a weather-tight outdoor enclosure to halt operation of the operator in an emergency situation. K. Accessory Power: One 24 VAC connection for operator accessories, including a radio receiver and loop detectors. L. Equipment: Provide the following optional equipment. 1. Plug-in loop detectors. 2.
electric gate operators section 02829 7. 8. 9. 10. 11. c. Provide 912B relay module. Heater: Chamberlain / LiftMaster 6532449 Thermostat Control Heater, Fin Type; designed to automatically maintain a suitable temperature inside a control enclosure down to -40 degrees F (-40 degrees C). Adjustable from 30 degrees to 120 degrees F (0 degrees to 50 degrees C). Used on operators 115V and 575V.
electric gate operators section 02829 F. Open and Close Limit Settings: Limit switches shall be modular and fully adjustable. G. Control Circuit: LiftMaster Model GL solid-state digital logic control board including lowvoltage control, external spike and surge protection, separate open and close external sensor inputs, fully adjustable inherent obstruction detection system, dual gate operation, built-in radio receiver, and optional external devices including loop detectors and telephone entry systems.
electric gate operators section 02829 PART 3 EXECUTION 3.1 EXAMINATION A. 3.2 PREPARATION A. 3.3 3.4 3.5 Do not begin installation until substrates have been properly prepared. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions. INSTALLATION A.
notes
The Chamberlain Group, Inc. 845 Larch Avenue Elmhurst, IL 60126 For more information, contact specs@liftmaster.com ©2011 The Chamberlain Group, Inc. Printed in U.S.A. 12/11 LMGTBRARSS Anything is possible. Discover how. http://specs.liftmaster.