Owner`s manual

8
1. Open panel cover. Panel announces, Use numbered
keys to enter ID.
2. Enter Master Code using the numbered keys. Panel
announces, Please select from Start Menu.
3. Press
Add
from the Start menu. Panel announces,
Select from main menu.
4. Press
Option #
. Panel announces, Option 1, press
again for next option or done to select
5. Press
DONE
. Panel announces, Option 1 is on.
Delete
turns off panel piezo beeps.
1. Open panel cover. Panel announces, Use numbered
keys to enter ID.
2. Enter Master Code using the numbered keys. Panel
announces, Please select from Start Menu.
3. Press
Delete
from the Start menu. Panel announces,
Select from main menu.
4. Press
Option #
. Panel announces, Option 1, press
again for next option or done to select.
5. Press
DONE
. Panel announces, Option 1 deleted.
Option 02 - Panel Voice
Panel Voice may be disabled, except for status messages,
open sensor responses, and when in program mode.
Add
enables the panel voice.
1. Open panel cover. Panel announces, Use numbered
keys to enter ID.
2. Enter Master Code using the numbered keys. Panel
announces, Please select from Start Menu.
3. Press
Add
from the Start menu. Panel announces,
Select from main menu
4. Press
Option #.
Panel announces, Option 1, press
again for next option or done to select.
5. Press
02
. Panel announces, Option 2, press again for
next option or done to select
6. Press
DONE
. Panel announces, Option 2 is on.
Delete
disables the panel voice.
1. Open panel cover. Panel announces, Use numbered
keys to enter ID.
2. Enter Master Code using the numbered keys. Panel
announces, Please select from Start Menu.
3. Press
Delete
from the Start menu. Panel announces,
Select from main menu
4. Press
Option #
. Panel announces, Option 1, press
again for next option or done to select.
5. Press
02.
Panel announces, Option 2 press again for
next option or done to select.
6. Press
DONE
. Panel announces, Option 2 deleted.
Note
The panel voice is always on for status messages,
open sensor responses and when in program mode.
Option 41 - Voice Chime
The panel will verbally announce which chime sensor has
been tripped if the chime feature is on.
Add
enables chime voice.
1. Open panel cover. Panel announces, Use numbered
keys to enter ID.
2. Enter Master Code using the numbered keys. Panel
announces, Please select from Start Menu.
3. Press
Add
from the Start menu. Panel announces,
Select from main menu
4. Press
Option #
. Panel announces, Option 1, press
again for next option or done to select.
5. Press
41.
Panel announces, Option 41, press again for
next option or done to select
6. Press
DONE
. Panel announces, Option 41 is on.
Delete
disables chime voice. The panel will not announce
which chime sensor has been tripped but will still chime 2
times for doors and 3 times for motion sensors when a
given sensor is tripped.
1. Open panel cover. Panel announces, Use numbered
keys to enter ID.
2. Enter Master Code using the numbered keys. Panel
announces, Please select from Start Menu.
3. Press
Delete
from the Start menu. Panel announces,
Select from main menu
4. Press
Option #
. Panel announces, Option 1, press
again for next option or done to select.
5. Press
41.
Panel announces, Option 41, press again for
next option or done to delete
6. Press
DONE
. Panel announces, Option 41 deleted.
Option 42 - Speaker Level
When this option is turned on you can set the panel
speaker level from 1 (the lowest voice level) to 8 (the
highest voice level). When you turn this option off, the
speaker level is set to 8 (the highest voice level).
Add
allows you to set the speaker level from 1-8.
1. Open panel cover. Panel announces, Use numbered
keys to enter ID.
2. Enter Master Code using the numbered keys. Panel
announces, Please select from Start Menu.
3. Press
Add
from the Start menu. Panel announces,
Select from main menu
4. Press
Option #
. Panel announces, Option 1, press
again for next option or done to select.
5. Press
42.
Panel announces, Option 42, press again for
next option or use numbered keys to enter option.
6. Enter the voice level (1 - 8) with the numbered keys.
7. Panel announces the speaker level that has been
selected
Delete
sets the speaker level to 8 (the highest voice level).