introduction Dear User Thank you for choosing Eli tech Pressure Gauge. To use the gauge correctly, please read over the manual first, especially the “Warning” part. It Is suggested to keep the manual properly with the gauge or Ina place where you can refer to it conveniently.
Intensification © Pressure measuring range: @ Resolution: 0.5psi ® Accuracy : 10.5% FS @® Measurement units: psi, kg/cm? cm Hg, in Hg, bar, kPa, MPa @ Offline records: 9000 readings @® Power: 3 AA alkaline batteries ® Battery life: 300 hours © Max depressurization @ Operating temperature: (0°F ~ 140°F) # Fitting: 1/8* Male NPT @® Wireless transmission distance: 30m © Dimension: 127*74*37mm Display 1. Battery Indicator 4, Wireless Connection Status 2. Auto Power off 5. Pressure Measurement 3.
Buttons C Wireless Press | Fightback | Wireless on Hold A.Switch units |B. Zem €. Record Both | Auto Power off Operation 1. Before the gauge accesses the system, press the power button (3) to power It on. The gauge displays PB. Then It will conduct self test until pressure value Is displayed. 2. After the gauge Is turned on, press and hold (3) to make the screen display "0". 3. Make sure Interface type matches with the access system. If not, please use the Included adapter. 4.
Battery inordinate The battery power is indicated in segments, which reduce with power consumption until the frame of flashes. Hence the LCD will display unstably. Please change batteries before the screen indicates unstably in case error message affects the normal use of the gauge. APP Penetrating 1. Tum on the gauge and enable wireless connection, open the mobile APP to research the device and then connect. 2.
Warning 1. Please use the gauge In specified environment to avoid fervor or damage of the sensor. 2, Please do not use chemical solvent or corrosive liquid to clean the gauge. 3. Please do not disassemble the gauge. 4, Remove the batteries If the gauge Is not to be used for a long time In case the leakage corrodes the gauge. The batteries Included are not rechargeable. Please do not charge them. 5.Please use a special tool to install or disassemble It. Do not twist hard the shell in case it is damaged.
