User's Manual

36
the “Local Area Connection”.
4. Select “Properties” from the popup menu that appears
5. In the “This connection uses the following items” field, select
“Internet Protocol (TCP/IP), and click “Properties”.
6. Enter the system’ s IP and DNS server addresses on the General tab
of the “Internet Protocol (TCP/IP) Properties” window. If DHCP is
used, click “Obtain an IP address automatically” and “Obtain DNS
server address automatically” on the General tab.
7. After all the all the information are correctly entered in the “Internet
Protocol (TCP/IP) Properties” window, click “OK” to finish.
Using Both DHCP and Static IP for Connection to Internet
When you are alternatively using networks with either DHCP or static IP
addressing, you can use alternative settings that enable simultaneous
configurations of DHCP and static IP to use both of the network connects