User's Manual

iii
14. The unit can be operated at an ambient temperature of max. 5C
~ 35C.
15. The sound pressure level of the operator's position according to
IEC 704-1: 1982 is equal or less than 70 dB(A).
16. Power Cord Requirements
The power cord set used with the AC adaptor must meet the
requirements of the country where you use the AC adaptor,
whether it is 100-240 Vac. The following information explains
the requirements for power cord set selection.
 The cor
d set must be approved by the country in which
it is used.
 The appliance coupler must have a configuration for
mating with a CEE7/EN60320/IEC 320/NEMA/ JIS C
8303 appliance inlet.
A. For U.S. and Canada:
 The cord set must be UL Listed and CSA Certified.
 The minimum specifications for the flexible cord are
No. 18 AWG, (2) Type SPT-2, and (3) 2-conductor.
B. For Japan:
 All components of the cord set must bear a “PSE” mark
and in accordance with the Japanese Dentori Law.
 The minimum specifications for the flexible cord
are .75m ㎡ conductors, (2) Type VCTR or VCTFK,
and (3) 2-conductor.
 The cord set must have minimum rated current capacity
of 7 A.
 The attachment plug must be a two-pole, grounded type
with a Japanese Industrial Standard C8303 (15 A, 125
VAC) configuration.
C. For Other Countries:
 The cord set fittings must bear the certification mark of
the agency responsible for evaluation in a specific
country.
 The flexible cord must be of a HAR (harmonized) type
H03VVH2-F.
 The cord set must have a current capacity of a least 2.5
Amperes and voltage rating of 125 or 250 Vac.