User's Manual

82


To install the new HDD, you will need to align the tabs on the drive bracket with the slots on
the bay. Press down gently on the drive bracket until it engages with the system. Do not
force the drive into place this can bend the pins on the hard drive.


Slide the compartment cover into place and be sure the screw holes on the cover align
completely with the screw holes in the case.


Secure the cover with the three screws.
Upgrading your System CPU
Refer to the following instructions and illustration for information on upgrading your notebook's
CPU.


Turn off the computer and disconnect the AC adapter and all peripherals. From the rear side
of your notebook, locate the CPU compartment and unscrew the 5 screws that is attached to
the CPU compartment door


Lift up the compartment door by using your index finger to lift the cover from the latch.


Remove the 4 screws that are attached to the heatsink on top of the CPU.