User Manual

3
e. The equipment has dropped and damaged.
f. If the equipment has obvious sign of breakage.
14. Do not leave this equipment in an environment unconditioned,
storage temperature above 60°C (140°f), it may damage the
equipment.
15. The unit can be operated at an ambient temperature of max. 35°C.
16. The sound pressure level at the operators position according to IEC
704-1: 1982 is equal or less than 70 dB(A).
17. Power Cord Requirements
The power cord set used with the AC adaptor must meet the
requirements of the country where you use the AC adaptor, whether
it is 100-120 or 200-240 Vac. The following information explains
the requirements for power cord set selection.
 The cord set must be approved for the country in which
it is used.
 The appliance coupler must have a configuration for
mating with a CEE22/EN6032/IEC 320 appliance inlet.
A. For U.S. and Canada:
 The cord set must be UL Listed and CSA Certified.
 The minimum specifications for the flexible cord are
No. 18 AWG.
B. For Japan:
 All components of the cord set must bear a “PSE” or
“ T ” mark and registration number in accordance with
the Japanese Dentori Law.
 The minimum specifications for the flexible cord
are .75m ㎡ conductors.
C. For Other Countries:
 The cord set fittings must bear the certification mark of
the agency responsible for evaluation in a specific
country.
 The flexible cord must be of a HAR (harmonized) type
H05VV-F.
 The cord set must have a current capacity of a least 2.5
Amperes and voltage rating of 125 or 250 Vac.