User's Manual Part 1

12ECS SI mPC
3.2 Installing the other oard
1. Safety Instructions
Follow these safety precautions when installing the motherboard:
 Wear a grounding strap attached to a grounded device to avoid damage from static
electricity.
 Discharge static electricity by touching the metal case of a safely grounded ob ect before
working on the motherboard.
 Leave components in the static-proof bags.
 Always remove the AC power by unplugging the power cord from the power outlet before
or removing the motherboard or other hardware components.
2. Installing the mother oard in a Chassis
1. Aim four locating holes of the BTM-S motherboard.
2. Use four screws to secure the m
otherboard.
Do not over-Ɵghten the screws as this can stress the motherboard.