Instruction Manual

■ chapter 4 upgrading your computer
Upgrading the Hard Disk Drive
To replace the hard disk drive, do the following:
1. Turn OFF the computer. Unhook the AC cord and all
cables/devices attached to the notebook.
2. Place your hand on a large metal object momentarily to
discharge any static electricity.
3. Locate and remove 11 Screw A’s on the Metal Cover.
4. Remove the Metal Cover.
5. Locate and remove 1 Screw B. Gently push the HDD
module to the right to disengage from the HDD
connector.
4-3