Manual

surface is face down (the side with no writing on it). Carefully insert the CD-ROM onto the

tray. Push the CD-ROM/DVD-ROM down gently so that it snaps onto the center ring.

3. Push the tray back into the drive.

To remove a disk under any DOS mode, do the following:

1. Check the LED display and make sure that the computer is not accessing the CD-

ROM/DVD-ROM/Combo drive.

2. Open the compartment door of the drive and push the eject button to release the drive.

3. Carefully pick up the CD disk by the edges and – while pressing down on the center ring –

remove the CD-ROM/DVD-ROM/Combo drive from the tray.