Owner's manual

Using BIOS

Boot Configuration

Bootup Numlock State [On]

Quiet Boot [Enabled]

Set Boot Priority

1st Boot [CD/DVD]

2nd Boot [Hard Disk]

3rd Boot [USB Floppy]

4thBoot [USB CD/DVD]

5th Boot [USB Hard Disk]

6th Boot [USB KEY]

7th Boot [Network]

8th Boot [UEFI]

Main Advanced Chipset M.I.B X Boot Security Save & Exit

+/- : Change Opt.

Enter : Select

F1:General Help





:Select Screen

:Select Item

F2:Previous Value

F3:Optimized Defaults

F4:Save & Exit

ESC:Exit

Select the keyboard Numlock

state

This page enables you to set the keyboard NumLock state and Boot device priority.

Boot Menu

Bootup NumLock State (On)

This item determines if the NumLock key is active or inactive at system start-up

time.

Quiet Boot (Enabled)

If enabled, BIOS will show a full screen logo at boot, if disabled, BIOS will set the

initial display mode to BIOS and show the diagnostic POST screen at boot.

1st/2nd/3rd/4th/5th/6th/7th/8th Boot (CD/DVD /Hard Disk /USB Floppy /USB

CD/DVD /USB Hard Disk /USB KEY /Network /UEFI)

Use these items to determine the device order the computer used to look for an

operating system to load at start-up time. The devices showed here will be different

depending on the exact devices installed on your motherboard.