User Manual

34
Using BIOS

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
OnChip SATA
SATA Mode
IDE DMA transfer access [Enabled]
Onchip IDE Channel0 [Enabled]
Onchip IDE Channel1 [Enabled]
IDE Prefetch Mode [Enabled]
Primary Master PIO [Auto]
Primary Slave PIO [Auto]
Secondary Master PIO [Auto]
Secondary Slave PIO [Auto]
Primary Master UDMA [Auto]
Primary Slave UDMA [Auto]
Secondary Master UDMA [Disabled]
Secondary Slave UDMA [Disabled]
IDE HDD Block Mode [Enabled]
Item Help

Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
VIA OnChip IDE Device
Integrated Peripherals
These options display items that define the operation of peripheral components on
the system’s input/output ports.
VIA OnChip IDE Device [Press Enter]
VIA OnChip PCI Device [Press Enter]
SuperIO Device [Press Enter]
Onboard LAN Device [Enabled]
Onboard LAN Boot ROM [Disabled]
Item Help

Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Integrated Peripherals




F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
VIA OnChip IDE Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:

IDE DMA transfer access (Enabled)
This item allows you to enable the transfer access of the IDE DMA then burst onto the PCI
bus and nonburstable transactions do not.
OnChip IDE Channel0/1 (Enabled)
Use this item to enable or disable the PCI IDE channels that are integrated on the
motherboard.
[Enabled]
[IDE]
OnChip SATA (Enabled)
Enables or Disables the build-in on-chip Serial ATA.
SATA Mode (IDE)
Use this item to select the mode of the Serial ATA.