User Manual

38
Using BIOS
Soft-Off by PWRBTN (Instant Off)
Under ACPI (Advanced Configuration and Power management Interface) you can create a
software power down. In a software power down, the system can be resumed by Wake Up
Alarms. This item lets you install a software power down that is controlled by the power
button on your system. If the item is set to Instant-Off, then the power button causes a
software power down. If the item is set to Delay 4 Sec. then you have to hold the power
button down for four seconds to cause a software power down.
Run VGABIOS if S3 Resume (Auto)
This item allows the system to initialize the VGA BIOS from S3 (Suspend to RAM) sleep
state.
Ac Loss Auto Restart (Off)
This item enables your computer to automatically restart or return to its last operating
status.
 IRQ/Event Activity Detect (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-AwardBIOS CMOS Setup Utility
IRQ/Event Activity Detect

Item Help
Menu Level
When Select Password,
Please press ENTER
key to change Password
Max 8 numbers.


PS2KB Wakeup Select [Hot Key]
PS2KB Wakeup from S3 [Disabled]
Power Button Lock Enabled
PS2MS Wakeup from S3 [Disabled]
Resume By USB(S3) [Disabled]
VGA [OFF]
LPT & COM [LPT/COM]
HDD & FDD
PCI Master [OFF]
Resume By PCI PME [Enabled]
Resume By RING [Disabled]
RTC Alarm Resume [Disabled]
Date (of Month) 0
Resume Time (hh:mm:ss) 0: 0: 0
IRQs Activity Monitoring [Press Enter]
x
x
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
x
[ON]

PS2KB Wakeup Select (Hot Key)
This item enables you to select any key, hot key or power key to allow keyboard
activity to awaken the system.
PS2KB Wakeup from S3 (Disabled)
This item enables or disables you to allow keyboard activity to awaken the system from S3
mode.
• Power Button Lock (Enabled): If you enabled this item, the system can
automatically resume by pressing power key on the keyboard, or typing in the
password.You must use an ATX power supply in order to use this feature.
PS2MS Wakeup from S3 (Disabled)
This item enables or disables you to allow mouse activity to awaken the system from S3
mode.