i
Preface Copyright 2009 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Table of Content ATTENTION: TEACHERS, PARENTS AND ADULT SUPERVISORS ................. 2 AGENCY REGULATORY NOTICES ............................................................. 5 MODIFICATIONS ................................................................................... 6 CONNECTIONS TO PERIPHERAL DEVICES .............................................. 6 SAR EXPOSURE ................................................................................. 6 DECLARATION OF CONFORMITY........................
ADVANCED SETUP ............................................................................. 43 SECURITY ......................................................................................... 45 BOOT SETUP ..................................................................................... 46 EXIT SETUP ...................................................................................... 48 3G CONNECTION ..................................................................................
1
Attention: Teachers, Parents and Adult Supervisors Please ensure that students understand the following: Emphasize to student that this device is an educational tool and not a toy. The computer, power supply, battery pack or power cord should not be dropped, crushed, stepped on or otherwise abused. This product is intended for school age children, ages 6 and up. Ensure students understand the safe and proper handling of power cord and power supply. Misuse could result in serious injury.
When cleaning the unit, clean only with a slightly damp soft cloth. Do not pour liquid onto the unit. Do not clean while computer is “on” or plugged into wall socket. Do not leave PC plugged in or “on” when enclosed in a nonvented container, such as a school backpack, as overheating may occur. It is recommended that students take a 5 minute break every 30 minutes of use.
4
Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the Manufacture may void the user’s authority to operate the equipment. Connections to Peripheral Devices Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations.
IEC61000-4-3: 2006 ED. 3.0 IEC61000-4-4: 2004 ED. 2.0 IEC61000-4-5: 2005 ED. 2.0 IEC61000-4-6: 2006 ED. 2.2 IEC61000-4-8: 2001 ED. 1.1 IEC61000-4-11: 2004 ED. 2.0 EN 300 328-2, EN 300 328-1, EN 301 489-1, EN 301 489-17 (ETSI 300 328, ETSI 301 489) Electro-magnetic Compatibility and Radio Spectrum Matter. EN60950 (IEC60950) I.T.E.
Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together.
The minimum specifications for the flexible cord are: (1) 0.75 mm2 conductors, (2) Type VCT or VCTF, and (3) 3-conductor. The cord set must have minimum rated current capacity of 7 A. The attachment plug must be a two-pole, grounded type with a Japanese Industrial Standard C8303 (15 A, 125 VAC) configuration. Other Countries The cord set fittings must bear the certification mark of the agency responsible for evaluation in a specific country.
Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash the exposed area with soap and water. If it contacts the eye, flush the eye with water for 15 minutes and seek medical attention. Do not charge the battery pack if the ambient temperature exceeds 45℃ (113℉). To obtain a replacement battery, contact your local dealer. Do not expose the battery pack to high storage temperatures (above 60℃, 140℉).
Lithium battery warning / Bridge battery warning This computer contains a lithium battery to power the clock and calendar circuitry. Der Arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 betragt 70dB (A) oder weniger. Zum Netzanschlua dieses Gerates ist eine geprufte Leitung zu verwenden. Fur einen Nennstrom bis 6A und einem Gerategewicht groBer 3kg ist eine Leitung nicht leichter als (1)H05VV-F, 3G, 0.75mm2 (2)2X0.75 mm2 conductors einzusetzen.
12
Getting To Know The Basics Welcome to the Intel-powered Clamshell Classmate PC Congratulations on your purchase of Intel-powered classmate PC. Intel-powered clamshell classmate PC features the latest advances in portable computing technology. Intel-powered clamshell classmate PC modular design provides maximum expandability without compromising portability.
To avoid damage to the display panel: 1. Try not to slam the display upon closing it. 2. Try not to place any object on top when it is closed or open. 3. Be sure the system is turned off or in suspend mode before you close the display panel. With the LCD screen open, you will see several features important for operating your Intel-powered clamshell classmate PC. Front View 1. 2. 3. 14 Camera Use this camera for any video conferencing application.
4. LED Status Indicator The LED Status Indicator displays the operating status of your Intel-powered classmate PC. When a certain function is enabled, a LED will light up. The following section describes the indication. System & Power Status Indicators LED Graphic Symbol Indication Blue light indicates the WLAN module is active. Blue light indicates the numeric keypad is activated. Blue light indicates the cap-lock is activated. Blue light indicates the HDD is being accessed.
5. 6. Keyboard The keyboard is used to enter data. Touch Pad The touch pad is a built-in pointing device with functions similar to a mouse. The touchpad is also equipped with a scroll bar so you can move around in a large document. Scrolling Bar - Sliding a vertical presentation of content, such as text, drawings, or images, across a screen or display window. It is often used to show large amounts of data that could not fit on the viewport all at the same time. 7. 8.
9. Light Sensor The system provides a Light-to-voltage converter module which is a sensor directly proportional to the light intensity of your surrounding working environment. It will affect the backlight intensity (bright/dark) of your screen display. This mode will then function once the OSD (On Screen Display) application is installed in your system. 10. Built-in Microphone The microphone is used when you are having an audio/video conference with the other party. Left Views 1.
2. 3. 4. 5. CRT Port Use to connect an external monitor. 4 in 1 Card Reader The 4-in-1 Card Reader supports SD/MMC/MS/MS Pro Card. You need to remove the outer jacket to access the card reader slot on the right side of the computer. USB 2.0 Port This port conforms to the latest USB2.0 plug-and-play standards. Ventilation Grill The fan grill is where air is exchanged to dissipate the internal heat. Do not completely block this airway. Right View 1.
2. 3. 4. 5. Stereo Headphone Jack The stereo headphone jack (3.5 mm diameter) is where you connect the headphones or external speakers. Microphone Jack The microphone jack (3.5 mm diameter) is where you connect a microphone. USB 2.0 Ports This port conforms to the latest USB2.0 plug-and-play standards. Ethernet / LAN Port When using a LAN, please use an EMI Shielding Cable to minimize an inteference when transmitting. 6. 7.
Bottom View 1. 2. 3. 20 Battery Release Latch Slide this latch to release the battery from its compartment. Battery Compartment This compartment contains the battery pack of your system. Battery Lock/Unlock Latch Slide this lock to lock or unlock the battery into its compartment.
21
Getting Started Connecting to a Power Source Connecting the AC Adapter A universal AC adapter is provided to supply your computer with power and also charge the computer’s battery pack. The adapter’s AC input voltage can range anywhere from 100 to 240 volts, covering the standard voltages available in almost every country. To connect the computer to an external power source: Do not use inferior extension cords as this may result in damage to your Intel-powered classmate PC.
Whenever possible, keep the AC adapter plugged into the Intelpowered classmate PC and an electrical outlet to recharge the battery. Never turn off or reset your Intelpowered classmate PC while the hard disk is in use; doing so can result in loss or destruction of your data. Always wait at least 5 seconds after turning off your Intel-powered classmate PC before turning it back on; turning the power on and off in rapid succession can damage the Intel-powered classmate PC’s electrical circuitry.
Explisionsgefahr bei unsachgernazen Austausch der Batterie. Ersatz nur durch denselben oder einem vom Hersteller empfohlenem ahnlichen Typ. Entsorgung gebrauchter Batterien navh Angaben des Herstellers.
To Remove the Battery Pack: Lithium-Ion Battery Your Intel-powered classmate PC uses a Lithium-Ion battery pack that provides power when you don’t have access to an AC outlet.
You must charge the battery pack for at least six hours before using it for the first time. In the Standby Suspend mode, a fully charged battery loses its power in roughly 1/2 day or less. When not being used, the battery’s power will deplete in one to two months. The battery pack in this system is replaceable by the end user. Battery Low-Power Warning 1. Low Battery Warning Low battery condition occurs when battery power is reduced to 10 percent.
When the battery is fully charged, the battery charge indicator becomes green. If system runs at heavy loads or in a high temperature environment, the battery may not be fully charged. You need to continue to charge it with the AC adapter plugged in until the charging LED turns green. System will not charge battery when temperature exceeds 45C. Checking the Battery Level You can check the remaining battery power in Operating System battery status indicator.
Then discharge the battery by entering the BIOS setup screen. (Press DEL key as soon as you turn on the computer. And let it remain at the setup screen until the battery runs out. Fully charge the battery again. Using Power Options Operating System Power Management provides basic power saving features. In the power configuration dialogue box, you may enter time-out values for display and hard disk drive.
Power Button Action Intel-powered clamshell classmate PC power button can be set to turn off the system or activate the suspend mode.
30
Using Intel-powered Clamshell Classmate PC Adjusting the LCD Screen Display The LCD screen display can be adjusted by the following key combinations. + - Changes Display Mode: LCD-only, CRT-only, LCD/CRT simultaneously + - Decreases the brightness level. It also disables the auto brightness (Light Sensor) adjustment. + - Increases the brightness level. It also disables the auto brightness (Light Sensor) adjustment. LCD Care LCD screens are delicate devices that need careful handling.
Do not press on, or store any objects on the cover when it is closed. Doing so may cause the LCD to break. Intel-powered clamshell Classmate PC Hot Key Controls Function Keys (Quick Keys) Function Keys (Quick Keys) + - WLAN on/off. + - Enters the Suspend Mode. + - Mute the system volume + - Decreases the speaker volume. + - Increases the speaker volume.
+ - Increases the brightness level of the screen. It also disables the auto brightness (Light Sensor) adjustment. + - HSPA on/off + - Auto brightness adjustment + The TouchPad The touchpad is a rectangular electronic panel located just below your keyboard. You can use the static-sensitive panel of the touchpad and slit it to move the cursor. You can use the buttons below the touchpad as left and right mouse buttons.
TouchPad Precautions The TouchPad is a pressure sensitive device. Please take note of the following precautions. Make sure the TouchPad does not come into contact with dirt, liquids or grease. Do not touch the TouchPad if your fingers are dirty. Do not rest heavy objects on the TouchPad or the TouchPad buttons. You can use the TouchPad with Microsoft Windows as well as nonWindows applications.
When using the Digital Pen, please refrain your child from biting or putting the pen into the mouth. Take an A4 size paper and attach it into the pen holder as shown on the illustration.
1. 2. Sensor – Be sure the two sensors must be facing the paper or the flat surface. Paper Holder – Attach the paper into the holder as shown on the illustration. After clicking on the displayed on your screen. icon, a Note Manager will be At this time, connect the pen connector into the port on the computer.
After the digital pen is attached into the connector on the computer, the Note Manager is shown on your screen.
Function 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 38 Edit Note – You can edit on the description that you just written. Clear Note – Clear the whole note that you had just written. Undo – Erases the last change done to the document. Redo – Reverse or advance to the current state. Pen Style – Choose the style of pen when it appear on the screen. Copy - Copy a set of words. Print – Print the document. Send Note to Network PC – Send to another via the network.
39
BIOS Setup And Security Feature The Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/Output System). It runs and maintains a variety of hardware functions. It is menu-driven software, which allows you to easily configure and change the settings. The BIOS contains manufacture’s default settings for the computer’s standard operations. However, there are occasions when you may be required to modify the default settings in the BIOS.
BIOS Action Keys Legend Key Alternate Key Function F1 Displays the General Help window. It can be enabled from anywhere in the BIOS. Esc Jumps to the Exit menu or returns to the Main menu from a submenu. Selects the menu item to the left. Selects the menu item to the right. or Keypad arrow keys Moves the cursor up and down between fields. Tab Enter Moves the cursor to the next position available in the field. Minus Scrolls backward through the values for the highlighted field.
Main Setup Under this menu, you may change time/date and view basic processor and system memory information. Due to various configurations on this model, your system may show different information. 42 System Time: Type in the current time, in HH:MM:SS format. System Date: Type in the current date, in MM/DD/YY format.
Advanced Setup 43
Item Primary IDE Master Third IDE Master 44 Selections/Sub-menu Type LBA/Large Mode Block (Multi-Sector Transfer) PIO Mode DMA Mode S.M.A.R.T 32Bit Date Transfer Type LBA/Large Mode Block (Multi-Sector Transfer) PIO Mode DMA Mode S.M.A.R.
Security Supervisor Password: Install or Change the Password. User Password: Install or Change the Password.
Boot Setup 46 Boot Settings Configuration: See Below.
Item Quick Boot Quiet Boot Selections / Sub-menu Disabled Enabled Disabled Enabled Description [Enabled]: The system will quick boot in the POST messages. When Enabled, the system will display OEM logo instead of the POST messages. When Disabled, the system will display POST messages (i.e. devices information.) Boot Device Priority: See Below. Item 1st Boot Device 2nd Boot Device Selections/Submenu Description Removable Dev.
Exit Setup 48 Save Changes and Exit: After you have completed the BIOS settings, select this item to save all settings, exit BIOS Setup utility, and reboot. New system settings will take effect on next power-up. F10 key can be used for this operation. Discard Changes and Exit: Discards changes done so far to any of the setup questions and exit. Discard Changes: Discards changes done so far to any of the setup questions.
49
3G Connection 3G is the third generation of mobile phone standards and technology. 3G enable users a wide range of more advanced service while achieving greater network capacity through improved spectral efficiency.
Press the hot key combination of Fn + F9 to verify 3G card status (Enable or Disable?) if it is Enable, then click the 3G application icon to start executing the application. Procedures in installing the application Insert the SIM card into the SIM slot. Execute the application by pressing the Mobile Partner icon From the Mobile Partner display window, click on the “Tools” item Select the “Options”.
52 Double click on the “Profile Management” and click on the “New” tab Click on the “OK” tab.
On the next window, click on the “Connect” tab. All configuration setting was completed, please click save icon to save all setting.
54
55
Web Camera Application This application offers video conferencing capabilities to work and communicate in real-time with one or more participants through streaming video, from any location. Press the “Camera” icon key to display the “WebCam Companion” screen display. Click on the “Capture” icon to .
Capture Application Main Function 1. 2. 3. Capture - Use this function to captured the image file of the other party when you are on video conferencing. Burst – Use this function to continue on capturing the current image that appears on your display to numerous pictures. Video Capture – Use this function to capture any video file. Secondary Function 1.
Preview window for video file Preview window for photo file All the photos that you captured will be displayed alternately.
2. 3. 4. 5. Find Target – Use this function to locate the drive that you would like to save the file that you have currently captured. Email – Use this functio to mail the file that you have captured. Print – Use this function to print the file. Trash – Click on the image or video file that you would like to delete and drag it to this icon. Edit Application The photo that you have captured is shown here for you to edit according to your own preferences. Edit Function 1. 2. 3.
4. 5. 6. 7. 8. 9. 60 Rotate Right 90 degrees – Use this function to rotate the photo into clockwise direction. Flip – Use this function to flip the photo file from left to right angle. Undo – Use this function to switch back to the original angle. Redo – Use this function to switch to the new angle. Resize – Use this function to resize the photo file by adjusting the width and height of your desired size. Crop – Use this function to crop (cut) the part of the photo that you would like to retain.
61
Troubleshooting The trouble shooting activity should only be performed by an adult. Your computer has been fully tested and complies with the system specifications before shipping. However, incorrect operations and/or mishandling may cause problems. This chapter provides a reference for identifying and correcting common hardware and software problems that you may encounter. When you encounter a problem, you should first try to go through the recommendations in this chapter.
speakers and microphone will not work. If external devices such as USB camera, scanner or printer do not function correctly when connected to the system, it is usually the device’s own problem. Consult the device’s manufacturer first. Some software programs, which have not gone through rigorous coding and testing, may cause problems during your routine use. Consult the software vendor for problem solving. Be sure to go to BIOS SETUP and load DEFAULT SETTING after BIOS re-flash.
Check the hard disk indicator LED. When you access a file, the LED lamp should light up momentarily. The new HDD may be defective or is not compatible. If your computer has been subjected to static electricity or physical shock, you may have damaged the disk drive. The hard drive is making abnormal whining noises You should back up your files as soon as possible. Make sure the source of noise is indeed from the hard drive and not the fan or other devices.
The screen flickers It is normal if the display flickers a few times during shutting down or powering up processes. Keyboard and Touchpad Problems The built-in touch pad performs errotically Make sure there is no excess perspiration or moisture on your hand when using the touch pad. Keep the surface of the touch pad clean and dry. Do not rest your palm or wrist on the surface of the touch pad while typing or using the touch pad.
Close the application programs you’re not using and restart the system. Network Adapter / Ethernet Problems The Ethernet adapter does not work Make sure the physical connections on both ends of the cable are good. The hub or concentrator may not be working properly. Check to see if other workstations connected to the same hub or concentrator is working.
This may be normal for Operating System when it is processing other CPU-intensive programs in the background or when the system is accessing slow-speed devices such the floppy disk drive. You may be running too many applications. Try to close some applications or increase system memory for higher performance. The processor may have been overheated due to the system’s inability to regulate its internal temperature. Make sure the computer’s ventilation grills are not blocked. USB2.
68
Specification CPU Intel® ATOM N270 processor 1.6GHz, 512K FSB@533MHZ Memory DDR2 400/533 SO-DIMM DRAM module 256/512 MB and 1GB SO DIMM 200-pin socket * 1 Core Logic Intel® 945GSE ICH7-M Audio Codec Realtek ALC269 Azalia integrated audio Analog 2.1 D3 mode support Card reader Support SD/MMC/MS/MS Pro Memory Card. USB 2.0 interface Support boot from CR LAN Controller Supports 10 and 100 Mb/sec.
Single antenna C3/C4 support PCI-E interface Ralink solution Keyboard Integrated QWERTY keyboard W/ Hot key 84 KEY K/B Multi-languages Supported Pointing Device PS/2 Touch Pad with Left and Right Click Button and scrolling Bar Camera (Optional) USB2.0 interface 30fps @ 640x480, 0.3M Driver/AP support Windows XP/ Linux Storage SSD Capacity 8G/16G MLC type PATA interface SanDisk PSSD 5000 SATA interface SSD 2.5” HDD Single-HDD for 2.5" 9.5mm SATA support Support SATA 2.
AC-Adapter Automatics Voltage adjustment between 100 and 240VAC 50/60Hz, 40Watts 20V/40W Supports 2 pin and 3 pin power cord BIOS Support PnP & ACPI 2.0 Support external USB flash memory card boot up. Physical Outline Dimension: 262.50 mm(W) x 260.90 mm (D) x 42.30 mm (H) (With handle and pu bag) Weight: 1.423 kg (8.9” with 4 cell/SSD) 1.514 kg (8.9” with 6 cell/SSD) 1.524 kg (10.1” with 4 cell, 2.5 HDD) 1.615 kg (10.1” with 6 cell, 2.
