User Manual

9
 The minimum specification s for the flexible co rd are: (1) 0.75
mm
2
conductors, (2) Type VCT or VCTF, and (3) 3-conductor.
 The cord set must have minimum rated current capacity of 7
A.
 The attachme nt plug must be a two-pole, grounded type with
a Japanese Indu strial Standard C8303 (15 A, 125 VAC)
configuration.
Other Countries
 The cord set fittings must bear the certification m ark of the
agency responsibl e for evaluation in a specific country.
Acceptable agencies are:
 CCC (China)
 The flexible cord must be of a HAR (harmonized) type
HO5VV-F 3-conductor cord with a minimum conductor size of
0.03 square inch es.
 The minimum specification for the flexible cord for Class II
product are: (1) 2X0.75 mm
2
conductors, (2) 2-conductor cord.
 The cord set must have a current capacity of at least 10 A and
a nominal voltage rating of 125 / 250 VAC.
This model is designed to use with the
following AC Adapter model only.
Manufacture: LISHIN INTERNATIONAL ENTERPRISE CORP.
Model: 0225C2040 (AC 2 Pin)
Model: 0225A2040 (AC 3 Pin)
Manufacture: DELTA ELECTRONI CS, INC.
Model: ADP-40MH AD (AC 2 Pin)
Model: ADP-40MH BD (AC 3 Pin)
Battery Pack Safety
 The battery pack is intended to use only with this notebook.
 The battery pack should b e replaceable by the end user.
Only qualified service technicians should replace the battery
pack.
 Do not disassemble the pack.
 Do not dispose of the battery p ack in fire or water.
 To avoid risk of fire, burns, or damage to your battery pack, do
not allow a metal object to touch the b attery contacts.