Preface Copyright 2004 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Notices Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canadian DOC Notice For Class B Computing Devices This Class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment Regulations. Cet appareil numerique de la classe B repecte toutes les exigences du Règlement sur le matèriel brouilleur du Canada.
Page intentionally left blank iv
Table of Contents Chapter 1: Before you Start --------------------------------------------------------------------------------- 1 Conventions of This Manual.......................................................................................................................... 1 Things you must remember before working on your computer .....................................................................
The Menu Bar ................................................................................................................................................ 48 The Legend Bar ............................................................................................................................................. 48 Launching Submenus..................................................................................................................................... 49 General Help .......................
Before you Start Conventions of This Manual Use this manual will help you get the most from your notebook computer. If you are an experienced user of computers and/or Microsoft’s Windows operating systems, you might find it useful to read the Quick Start Guide that comes along with your accessories. If you are a less experienced user, you should through the manual carefully before using your system.
8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Place the power cord in such a way that people can not step on it. Do not place anything on top of the power cord. All cautions and warnings on the equipment should be noted. If the equipment is not use for a long time, disconnect the equipment from the main power outlet to avoid being damaged by transient overvoltage. Never pour any liquid into the opening, this could cause fire or electrical shock. Never open the equipment.
All components of the cord set must bear a “PSE” or “ T ” mark and registration number in accordance with the Japanese Dentori Law. The minimum specifications for the flexible cord are .75m ㎡ conductors. C. For Other Countries: 18. 19. 20. 21. 22. The cord set fittings must bear the certification mark of the agency responsible for evaluation in a specific country. The flexible cord must be of a HAR (harmonized) type H03VV-F. The cord set must have a current capacity of a least 2.
4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 4 Flüssig- oder Aerosolreiniger. Am besten eignet sich ein angefeuchtetes Tuch zur Reinigung. Die Netzanschluβsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein. Das Gerät ist vor Feuchtigkeit zu schützen. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen oder Fallen könnte Beschädigungen hervorrufen. Beachten Sie beim Anschluß an das Stromnet die Anschlußwerte.
120 oder 200-240V Wechselspannung beträgt. Das Kabel-Set muss für das Land, in dem es eingesetzt wird, zugelassen sein. Der Gerätestecker des Kabels muss in eine CEE22/ EN603/ IEC 320 Buchse passen. A. Für die USA und Kanada: Das Kabel-Set muss UL-gelistet und CSA zertifiziert sein. Die Minimalanforderungen für das Kabel entsprechen No. 18 AWG. B.
21. 22. Es besteht Explosionsgefahr, wenn der Akku nicht ordnungsgemäß ersetzt wird. Ersetzen Sie den Akku nur durch einen Akku gleichen oder äquivalenten Typs, der vom Hersteller empfohlen wird. Entsorgen Sie Akkus entsprechend den Anweisungen des Herstellers. Entfernen Sie den Akku auf keinen Fall bei eingeschaltetem Notebook, da hierdurch Daten verloren gehen könnten. Der Netzeingabeanschluss dient als Hauptschalter des Geräts.
There are some things you can tolerate that the computer can’t – things like static electricity, dust, water, steam and oil. In case you decide to pull over for roadside computing, try to choose a clean, comfortable work area for your system. A lithium-ion battery pack will be available when you are traveling. If you are running your system for the first time on battery power, remove the battery from the package, install it into the system and recharge the battery to fully prepare for service.
Page intentionally left blank 8
Introduction There are more and more people spending large amounts of time in front of computer monitors now that scientists from many fields including anatomy, psychology, and occupational safety are involved in the study of ergonomically sound work environments. A few tips to help you work effectively without a lot of physical discomfort: Purchase a chair with armrests and good back support. Don't slouch when sitting; keep your back straight.
Getting to Know Your Computer Opening the LCD Panel At the front of the Notebook computer you will find a “Frame LCD” on the middle of the display panel for you to conveniently raise the LCD panel. Standard Version Use your hand to pull up the “frame LCD”. At any time you can tilt the display toward or away from you to a comfortable viewing position. Press on the Power button to start your computer.
Raise the LCD panel and follow the correct procedures as shown on the illustration. Please don’t raise the LCD panel from the middle part since this is where the camera is located. The camera is a sensitive device that a strong pull might cause damage to it. At any time you can tilt the display toward or away from you to a comfortable viewing position. Press on the Power button to start your computer. Important Notices To avoid damage to the display panel: Try not to slam the display upon closing it.
Each of these features is briefly described below. System Status Indicator Panel HDD Indicates that the computer is accessing the hard disk drive.
Numeric Lock Indicates that the keyboard is in Num Lock mode. Caps Lock Indicates when the keyboard is in Caps Lock mode. Scroll Lock Indicates when the keyboard is in Scroll Lock mode. Camera Button (Optional Version) Use this key to open the built-in camera application. This button will not function if your model is the standard version with no built-in Camera. Outlook Express Button Use this key to open Microsoft's Outlook to send/receive your mail.
Speaker The internal speakers provides true stereo sound. The Front Panel Standard (Without Built-in Camera) Card Reader Supports 4-in-1 card reader slot (support SD/SDIO/MS/MS Pro card) Audio Line Out Headset Jack You can plug an external speaker, headphone or connect the line out jack to an audio device External Microphone Jack Allows you to receive monophonic input from an external microphone. Frame LCD Pull up this frame to raise the LCD panel.
Built-in Camera (Option) Press the camera button to capture the image with this built-in camera. The Left Side The Modem Port Connect a standard phone line directly to the internal modem. Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. To reduce the risk of fire use only No. 26 AWG or larger telecommunication line cord.
Ventilation Opening Please don't block this opening during operation of the system. External CRT Port Connect to any external monitor. The LAN Port Connect to a high-speed 10Base-T Ethernet network. When using a LAN, please use an EMI Shielding Cable to minimize an inteference when transmitting. PCMCIA Socket Cover Open this cover to access the PCMCIA socket. PCMCIA Button Press this button to release the PC card.
LED Indicators These three LED indicators are separately program for the following functions: Power On, Suspend Mode and Battery Charge. Battery Charge This indicator will lit blue when the battery is in charging status. When the indicator light turns off, it indicates the system is in full charge. Power On This indicator will lit when the notebook is powered On. Suspend Mode This indicator will lit when the notebook enter the suspend mode.
The Right Side USB Ports Your computer includes three Universal Serial Bus (USB) port. The CD-ROM/DVD-ROM or DVD CD-RW Combo Your Notebook comes with a swappable 24X (or higher) 5.25" IDE CD-ROM/DVDROM/Combo Drive (DVD-ROM+CD-RW), DVD-Dual CD-ROM release button Use this button to release the CD-ROM/DVD-ROM from its compartment.
The Rear DC-In Plug the AC adapter into this connector. Kensington Lock Allows you to connect a special computer lock to secure your system.
The Bottom Panel Battery Your notebook comes equipped with a factory-installed battery pack module. Battery Release Latch Slide this latch to release the battery.
Battery Lock Slide to lock the battery. CPU Fan This fan will reduce the heat on the CPU. CPU Compartment This compartment will serve for you to upgrade your CPU. Expansion Compartment This compartment will serve as an expansion to upgrade your RAM module. HDD Compartment Your computer includes a 2.5-inch IDE hard disk drive (9.5mm in height).
Page intentionally left blank 22
Getting Started Connecting to a Power Source Connecting the AC Adapter A universal AC adapter is provided to supply your computer with power and also charge the computer’s battery pack. The adapter’s AC input voltage can range anywhere from 100 to 240 volts, covering the standard voltages available in almost every country. The power cord for the AC adapter requires a three-hole grounded AC outlet.
Whenever possible, keep the AC adapter plugged into the Notebook and an electrical outlet to recharge the battery. Never turn off or reset your Notebook while the hard disk is in use and the HDD status icon is lit; doing so can result in loss or destruction of your data. Always wait at least 5 seconds after turning off your Notebook before turning it back on; turning the power on and off in rapid succession can damage the Notebook’s electrical circuitry.
Only use batteries that are approved by an authorized dealer. All batteries are not the same and therefore should not be treated as such. Using the wrong battery could cause serious damage to your computer and yourself through toxic emissions. Inserting and Removing the Battery Pack The battery pack should already be inserted in your Notebook computer when you unpack it. If not inserted, follow these directions: 1. 2. 3. Angle the battery into the bay.
To remove the battery pack: 1. 2. 3. Slide the battery latch into outer direction to release the battery. Slide the battery lock to unlock the battery from the compartment. Hold the battery at the finger grip and pull it out from the compartment. Charging the Battery Pack The installed battery pack charges automatically any time the computer is connected to the AC adapter and an external power source. It is a good idea to occasionally discharge the battery pack fully to preserve its operating performance.
Using the Notebook Computer Adjusting the LCD Screen Display The LCD screen display can be adjusted by the following key combinations. KEYS FUNCTIONS [Fn] + [F7] Decreases the brightness level. [Fn] + [F8] Increases the brightness level. [Fn] + [F10] Use this key combination to expand your video screen or reset to its original size. This function will be disabled when the system is in Overlay mode (playing video).
External CRT Display You can hook up an external monitor through the 15-pin CRT connector. Configurations are available: LCD only CRT only Simultaneous display of the LCD screen and CRT monitor You can switch between these display configurations by pressing the key combination [Fn] + [F12]. A Tour of the Notebook’s Keyboard The Notebook’s keyboard uses a standard QWERTY layout with the addition of special function keys and an embedded numeric keypad for number intensive data entry.
The Notebook’s Hot Key Controls KEYS FUNCTION(S) Power Button Press this button once to power on or enter the suspend/resume mode. Press this button for more than 4 seconds to power off the system. Capture Button Open “Capture” function short-cut key Internet Button Open Internet WWW Home short-cut key Outlook Button Open Internet Outlook short-cut key Wireless LAN On/Off Button Open Email Reader short-cut key [Fn] + [F2] This key combination turns on/off the volume.
TouchPad Precautions The TouchPad is a pressure sensitive device. Please take note of the following precautions. Make sure the TouchPad does not come into contact with dirt, liquids or grease. Do not touch the TouchPad if your fingers are dirty. Do not rest heavy objects on the TouchPad or the TouchPad buttons. You can use the TouchPad with Microsoft Windows as well as non-Windows applications.
Data Storage and Retrieval Data storage and retrieval are two of the most fundamental tasks you will perform when working with your computer. The Notebook is equipped with a hard disk drive (HDD). The HDD is removable allowing for easy upgrades. The CD-ROM/DVD-ROM/Combo Drive Features of the CD-ROM/DVD-ROM/Combo Drive The features of the CD-ROM/DVD-ROM/Combo Drive are listed below.
Carefully insert the CD-ROM onto the tray. Push the CD-ROM/DVD-ROM/Combo Drive down gently so that it snaps onto the center ring. Push the tray back into the drive. To remove a disk, do the following: Check the LED display and make sure that the computer is not accessing the CDROM/DVD-ROM/Combo Drive. Push the eject button and pull the tray all the way out. Carefully pick up the CD disk by the edges and – while pressing down on the center ring – remove the CD-ROM/DVD-ROM/Combo from the tray.
When inserting a Type II PC card, make sure the connector is inserted in the socket. Before ejecting a PC card, ensure that it is not being accessed by the System. For example, if the message “Write protect error writing Drive x” is displayed, the user has to change the write protect switch setting on the memory card. To change the switch setting, (a) eject the card, (b) change the switch setting, and (c) re-insert the card.
Preparing the Battery Pack for Use Before using the battery pack for the first time, the Smart Battery IC within the battery pack should be calibrated in order to get accurate reporting of remaining battery life status. To calibrate the battery pack, follow the instructions below: 1. 2. 3. 4. Insert the battery into the battery compartment and turn on the Notebook. If the battery is completely without power go to the next step.
Battery Low Warning When the pack initially reaches the “Battery Low” state approximately 10 ~ 15 minutes of the usable battery life is left. You will hear an audible beep signal every 1.5 seconds alerting you to the “Battery Low” status. When the battery power reaches the “Battery Low Low” status the beeping sound will accelerate. Your battery now has 1 ~ 2 minutes of battery charge remaining. You must save your data or connect AC power immediately; otherwise, you may lose your data.
If this key combination does not shut down the Notebook, you can reset the Notebook by using the Notebook’s power button. Should the Notebook lock up for some reason, pressing this button powers the Notebook off. Adjusting the Brightness To adjust the brightness on the LCD screen, press and hold down the [Fn] key in the lower left hand corner of the keyboard and press the [F7] key to reduce the brightness or [F8] to increase the brightness.
Desktop Operation Your notebook is capable of providing you with efficient and productive mobile computing, it also has the speed and capacity to service as a desktop system. This chapter discusses those functions of your notebook that are typical of desktop systems. Audio The Multimedia Sound System The Notebook’s built-in audio capabilities allow you to take advantage of a wide range of education and entertainment multimedia software.
Audio Volume Control The Notebook is equipped with hot-key volume controls: Pressing the [Fn] + [F3] hot-key combination decreases the audio output volume, press the [Fn] + [F4] hot-key combination increases the audio output volume. Audio Software Your notebook comes equipped with an integrated sound system capable of providing you with quality audio sound through the built-in speakers or through external speakers connected via the system ports.
Connecting Peripheral Devices To expand your computing capabilities, you can add a variety of external devices to your computer. You may, for example, want to add a mouse, modem, or a printer. The computer is equipped with several interface ports, including an enhanced parallel (printer) port, a serial port, and USB ports. These are provided as a means of connecting peripheral devices to the computer.
Page intentionally left blank 40
Internet Connection There are numerous ways to connect to the Internet. This may vary from the user’s working environment as well as system specifications. Using a modem and a telephone line Using a wired LAN Using a wireless LAN Using a modem for Connection to Internet Use a telephone line to connect to the modem port of your computer. Do not use a digital telephone line.
In the “Network Tasks” window, use your mouse pointer to click on the “Local Area Connection”.
In the “This connection uses the following items” field, select “Internet Protocol (TCP/IP), and click “Properties”. Enter the system’s IP and DNS server addresses on the General tab of the “Internet Protocol (TCP/IP) Properties” window. If DHCP is used, click “Obtain an IP address automatically” and “Obtain DNS server address automatically” on the General tab.
After all the all the information are correctly entered in the “Internet Protocol (TCP/IP) Properties” window, click “OK” to finish. Using Both DHCP and Static IP for Connection to Internet When you are alternatively using networks with either DHCP or static IP addressing, you can use alternative settings that enable simultaneous configurations of DHCP and static IP to use both of the network connects without reconfiguring. Follow the steps mentioned when you are using wired LAN connection from 1 to 7.
When you have completed the entire configuration, click “OK”. Using Wireless LAN Network for Connection to Internet To start with the setup, be sure that the “Wireless” button on top of the keyboard is lighted in blue color. Press it once to get the system connected when the button is lighted in blue color; the system is not connected when the button is not lighted. Please refer to an experience technician to solve this problem. 1. 2. 3. 4.
5. 6. wireless network Settings”. Click “OK”. A small icon will display on your lower right end of the Windows display. Click on the icon and select the setting for the available network shown on the list and click on the “Connect” button. For more detail on the Network key, please refer to your local ISP provider and follow the procedures describe in the “ISP Installation Guide” to proceed with the installation.
Running BIOS Setup Introduction The BIOS (Basic Input and Output System) Setup program is a menu driven utility that enables you to make changes to the system configuration and tailor your system to reflect installed hardware or alter system performance. When the Notebook is turned back on, the system is configured with the values stored in CMOS.
Item Specific Help On the right side of the Setup screen is an area labeled Item Specific Help. This area will list navigation key shortcuts and information that is specific for the item that you are currently editing. The Menu Bar The top of the screen has a menu bar with the following selections: Main - Use this menu to make changes to the basic system configuration. Advanced - Use this menu to enable and make changes to the advanced features available on your system.
→ Selects the menu item to the right. ↑ or ↓ Keypad arrow keys Moves the cursor up and down between fields. Tab Enter Moves the cursor to the next position available in the field. Minus key (-) Scrolls backward through the values for the highlighted field. Plus key (+) Scrolls forward through the values for the highlighted field. Home PgUp Moves the cursor to the field at the top of the window. End PgDn Moves the cursor to the field at the bottom of the window.
Save Changes and Exit the Setup Program Refer to the Exit menu section of this chapter for detailed information on saving changes and exiting the setup program.
The Advanced Menu Selecting Advanced from the menu bar displays the Advanced menu: 51
The Security Menu The Notebook’s advanced system of security allows you to set a password to prevent unauthorized access to system resources, data, and the BIOS Setup Program.
The Boot Menu The Boot menu allows the user to specify the order in which the Notebook is to check for a device to boot the system. You can also configure the way that the system will boot up. To make changes, select Boot from the menu bar.
The Exit Menu Once you have made all of your selections from the various menus in the Setup program, you should save your changes and exit Setup.
The Software Utilities Disks AutoRun Installation Follow the step-by-step procedures on the CD-ROM/DVD-ROM to execute the “AutoRun” application by selecting the “Setup”.
Installing the Chipset’s INTEL_INFINST Driver Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive. Click “Start” and Select “Run”. Type the following: D:\Driver\Chipset\INFINST_ENU.exe (If D is not your CD-ROM/DVD-ROM drive, substitute D with the correct drive letter). Click on “INFINST_enu.exe” to begin the Installation. Follow the Wizard’s on-screen instructions to complete the installation. Restart the system. Installing the LAN Driver Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive.
Installing Webcam Drivers Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive. Click “Start” and Select “Run”. Type the following: D:\Driver\BsInstall.exe (If D is not your CD-ROM/DVD-ROM drive, substitute D with the correct drive letter). Click on “Setup” to begin the Installation Wizard. Follow the Wizard’s on-screen instructions to complete the installation. Restart the system.
Installing the TouchPad Driver Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive. Click “Start” and Select “Run”. Type the following: D:\TouchPad\Win2KXP\Setup.exe (If D is not your CD-ROM/DVD-ROM drive, substitute D with the correct drive letter). Click on “Setup” to begin the Installation Wizard. Follow the Wizard’s on-screen instructions to complete the installation. Restart the system. Installing VGA Display Drivers Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive.
Installing the CardReader for SD Card Driver Click “Start”, select “My Computer” and use your mouse right button to choose on the “Properties” item. From the “System Properties” window, click on the “Hardware” item and click on the “Device Manager” tab.
Select “PCI Device” and click on the “Update driver”. Select the “Install from a list or specific location (Advanced)” item and click “Next”.
Select the “Search for the best driver in these locations” and enables the “Include this location the search” then click “Browse” Locate for the path of SD card driver in Driver CD and click “Ok” 61
Click ”Next”. Click ”OK” to proceed.
Click “Browse” Locate for the correct path of SD card driver in Driver CD and click “Open” 63
Click “OK” Click “OK” 64
Click “Browse” Locate for the correct path of SD card driver in Driver CD and click “Open” 65
Click ”OK” Finish.
Close the Device Manager Insert the SD card into the card reader and the following window will display on your screen. Select the “Install from a list or specific location (Advanced)” item and click “Next”.
Select “Search for the best driver in these locations” and enable the “Include this location the search” and click “Next”. Click “OK”.
Click “Browse” Locate on the correct path of SD card driver in Driver CD and click “Open” 69
Click “OK” to proceed. Click on the “Finish” button. You will find out the SD card is shown in “My Computer”.
Installing the CardReader for MS Card Driver From Start, click on the "My Computer" icon and click the "View System Information". Click on the "Hardware" tab from the "System Properties" dialog window. Click the "Device Manager" button. Double click on the "Other Devices", double click the "Base System Device" and click on the "Driver" tab. Click the "Update Driver" tab and select the "Install from a list or specific location (Advanced)" item and click "Next".
Installing the WLAN Card Driver From Start, click on the "My Computer" icon and click the "View System Information". Click on the "Hardware" tab from the "System Properties" dialog window. Click the "Device Manager" button. Double click on the "Other Devices", double click the " Network Controller " and click on the "Driver" tab. Click the "Update Driver" tab and select the "Install from a list or specific location (Advanced)" item and click "Next".
Monitor If you are using a large screen display, remove the check mark on the “Hide modes that this monitor cannot display” item and set your screen to 1280x800 resolution.
Click on the “Graphics Properties” button at the lower end of the screen display.
Devices Use the [Fn] + [F12] hot keys to toggle between the LCD and external monitor display. If you prefer to use only one display in operating your system, press the [Fn] + [F12] hot keys will shut down the LCD display, external monitor display or both at this random order.
Color You can adjust the right color for your window screen by moving the “Brightness” adjustment window to increase or decrease the right resolution for your screen display.
Schemes Set the resolution for your VGA display.
Hot Keys This program provides you with the corresponding hot key combination to operate conveniently or you can also set your own combination.
Information This illustrates the current resolution of your VGA display.
Page intentionally left blank 80
Video Conferencing This application offers video conferencing capabilities to work and communicate in real-time with one or more participants through streaming video, from any location. After installing the PC Camera driver, there is a shortcut in desktop, which named “Bs350u2”, and a folder “BisonCam” in “Programs”. Press on the “Camera” button atop the system keyboard to run the “Capture” application of “BisonCap”.
BisonCap Application After a video appear on the “BisonCap” application window, press on the “Capture” button to capture the picture. Using Commands and Buttons The File Menu Commands and Buttons Set Capture File - Set to save directory and video file name. Allocate File Space - Allocate free space for video file. Save Captured Video As - Saved as video file after capturing. Exit - Exit the application.
The Device Menu Commands and Buttons This application set the camera device. The Options Menu Commands Preview - Set preview in screen or not. Video Capture Filter - Set Properties. Video Capture Pin - settings of stream format. You can set the corresponding feature for Environment, Frequency, Rotation and Extension of your captured image file. Environment - set camera work environment. Frequency - set the frequency. Rotation - set to horizontal rotation or vertical rotation.
Brightness/Contrast/Hue/Saturation/Sharpness/Gamma/White Balance/Backlight Comp - To adjust video settings and show value. Default - Reset all settings in this page to default. Exposure - De-select the check mark on the box if you want to change the value.
Frame Rate - This function is to set video frame rate. If your utility rate of CPU is too high, you can choose the low frame rate to reduce the CPU’s utility rate. Output Size - Change the output size. Capture Menu Commands and Buttons Start Capture - start capture video stream. Stop Capture - stop capture video stream. Set Frame Rate - set frame rate while capturing a video. Set Time Limit - set time limit of capture stream.
Page intentionally left blank 86
Troubleshooting This chapter describes locating and solving problems that you may encounter while using your computer. Locating a Problem Problems with your computer can be caused by something as minor as an unplugged power cord – or as major as a damaged hard disk. The information in this chapter is designed to help you find and solve minor problems. If you try all the suggested solutions and you still have a problem, make a list of what steps you have taken to correct the problem and contact your dealer.
Checking Cables and Connections Start by performing a careful visual inspection of the exterior of the computer. If no LEDs are illuminated, make sure that your computer and its peripherals are getting power and communicating with each other properly. To check the power cables, and connections: 1. 2. 3. If you have been using battery power, connect the Notebook to an external power source and make sure that the battery has a charge.
A few seconds after you turn on your computer, a copyright message appears on your display screen. A memory test message appears next; as the test continues, memory size increases until all installed memory is tested. Normally, the only test routine visible on the screen will be the memory test. Two classifications of malfunctions can be detected during the POST: Error messages that indicate a failure with either the hardware, the software, or the Basic Input/Output System (BIOS).
Solution: Correct the date and time using the DOS DATE and TIME commands or the options in the Setup Utility. If the date and time become incorrect after a short time, your CMOS battery may be depleted. Contact your dealer to change the battery. Problem: The message: “Invalid system disk, Replace the disk, and then press any key” appears during boot. Solution: Check and make sure that you do not have a non-bootable floppy diskette inserted in your floppy drive.
Problem: The diskette if full. Solution: Try using another diskette or free up some space on the diskette. The disk drive is not operating. Contact your dealer for support. Problem: You cannot use the mouse. Check the cable connection. Check the mouse with another application to see if there is a software incompatibility problem. If possible, check the mouse with another computer to see if it works. If it doesn’t operate on a different system, the mouse might be broken.
Page intentionally left blank 92
Upgrading your System Upgrading your Memory Refer to the following instructions and illustration for information on upgrading your notebook's memory. Turn off the computer and disconnect the AC adapter and all peripherals. Turn the notebook over so that the rear ports are facing you and locate the memory module compartment. Remove the screws that secure the RAM module compartment cover and set it aside in a safe place.
been made with two unequal-length sections. You will only be able to insert the card in one direction. Insert the edge connector into the slot. The gold edge connector of the card should not be visible when the card is fully inserted. Press the card downward where you should hear an audible click as the latches of the connector secure the card in place. Once the module is properly seated, you can replace the cover on this compartment. Replace and tighten the screw.
To install the new HDD, you will need to align the tabs on the drive bracket with the slots on the bay. Press down gently on the drive bracket until it engages with the system. Do not force the drive into place this can bend the pins on the hard drive. Slide the compartment cover into place and be sure the screw holes on the cover align completely with the screw holes in the case. Secure the cover with the three screws.
Use a screw to turn the screw that is attached to the CPU in counterclockwise direction as shown on the illustration. After the screw is loosen you can lift up the CPU to finish the procedures.
Specification Detailed Notebook Specifications Operating System Compliance Intel® Pentium® M (Dothan) processor, 2MB L2 cache, FSB400MHz, 1.8G~ 2.0G Intel® Pentium® M (Banias) processor, 1MB L2 cache, 1.4G~1.7G, FSB400MHz 478pin mPGA2 package Microsoft® Windows® XP Professional Edition Microsoft® Windows® XP Home Edition Core Logic Intel 855GME (Montara) + ICH4-M Memory Expansion 1 slot of 200pin DDR module, expandable up to 1GB system memory Support 2.5V DDR-333 module 12.
Pointing Device Synaptics touchpad Application Launch Key E-mail, Internet, Capture, WLAN LED Status Indicator Power, Suspend/Resume, Battery Charging Status, Hard Disc Access, Num Lock mode, Caps Lock mode, Scroll Lock mode, WLAN Lock mode 3.0mm travel, inverted-T, 88 keys with 2 windows key: Internet & Microsoft For Connectivity Keyboard Interface Ports Front Side 4 in 1 Card reader, Headphone, Mic-in Left Side Lan port, Modem port, VGA –out port, PCMCIA slot, 1394A port Right Side USB 2.
Card Reader One 4-in-1 card reader slot (support SD/SDIO/MS/MS Pro card) Communication 10/100 Base-T LAN on board MDC Fax/modem V.90/V.92 Intel PRO/Wireless 2100/2100A (MiniPCI solution) Built-in WLAN antenna CMOS camera with USB interface, Mega pixel resolution CMOS image Three USB2.0 ports, up to 480Mbit/s USB Connector Security ACPI 2.0 compliance Support Stand-by, Suspend to Disk, Suspend to RAM Smart Battery System Support Kensington Lock Size 320.0(W) x 242.0(D) x 22.0(H)mm/28.
