i
Preface ©Copyright 2005 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Notices Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Content BEFORE YOU START ...............................................................................1 INTRODUCTION......................................................................................11 WELCOME TO THE NOTEBOOK PC......................................................11 GETTING STARTED ...............................................................................21 CONNECTING TO A POWER SOURCE ...................................................21 USING THE NOTEBOOK COMPUTER ....
THE EXIT MENU ................................................................................54 VGA UTILITIES .....................................................................................55 TROUBLESHOOTING ..............................................................................59 LOCATING A PROBLEM .......................................................................59 CHECKING CABLES AND CONNECTIONS ..............................................59 THE POWER-ON SELF TEST ...................
Canadian DOC Notice For Class B Computing Devices This Class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment Regulations. Cet appareil numerique de la classe B repecte toutes les exigences du Règlement sur le matèriel brouilleur du Canada. Personal Inventory This Notebook computer system is designed for years of productive and pleasurable computing. Use this section to keep notes about details of your purchase. Update this section when you add new options.
Before you Start CONVENTIONS OF THIS MANUAL Use this manual will help you get the most from your notebook computer. ^ If you are an experienced user of computers and/or Microsoft’s Windows operating systems, you might find it useful to read the Quick Start Guide that comes along with your accessories. ^ If you are a less experienced user, you should through the manual carefully before using your system.
EUROPE – EU DECLARATION OF CONFORMITY Hereby, xxx Corporation, declares that this Product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. EUROPE – RESTRICTIONS FOR USE OF 2.4GHZ FREQUENCIES IN EUROPEAN COMMUNITY COUNTRIES This device may be operated indoors or outdoors in all countries of the European Community using the 2.4GHz band: Channels 1 – 13, except where noted below.
^ To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above 5GHz channel limitations apply. The user should check the current channel of operation. If operation is occurring outside of the allowable frequencies as listed above, the user must cease operating at that location and consult the local technical support staff responsible for the wireless network.
7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 4 Make sure to use the right voltage for the power source when connecting the equipment to the power outlet. Place the power cord in such a way that people can not step on it. Do not place anything on top of the power cord. All cautions and warnings on the equipment should be noted. If the equipment is not use for a long time, disconnect the equipment from the main power outlet to avoid being damaged by transient overvoltage.
18. 19. 20. 21. ¾ The cord set must be UL Listed and CSA Certified. ¾ The minimum specifications for the flexible cord are No. 18 AWG. B. For Japan: ¾ All components of the cord set must bear a “PSE” or “ T ” mark and registration number in accordance with the Japanese Dentori Law. ¾ The minimum specifications for the flexible cord are .75m ㎡ conductors. C. For Other Countries: ¾ The cord set fittings must bear the certification mark of the agency responsible for evaluation in a specific country.
system loses power. 22. The input receptacle is used as the main disconnecting device. 23. Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. To reduce the risk of fire use only No. 26 AWG or larger telecommunication line cord. WICHTIGE SICHERHEITSHINWEISE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 6 Bitte lesen Sie diese Hinweis sorgfältig durch. Heben Sie dirse Anleitung für den späteren Gebrauch auf.
c. d. 14. 15. 16. 17. Das Gerät war Feuchtigkeit ausgesetzt. Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen. e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt. f. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist. VORSICHT: Explosiongsgetahr bei unsachgemäßen Austausch der Batterie. Ersatz nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen Typ.
18. 19. 20. 21. 22. 8 ¾ Das Kabel muss vom HAR (harmonisierten) Typ H03VV-F sein. ¾ Das Kabel-Set muss eine Stromkapazität von mindestens 2,5 Ampere haben und Spannungen von 125 oder 250 V Wechselstrom gestatten. Bei der Benutzung Ihres Telefongerätes sollten Sie immer die grundlegenden Sicherheitsmaßnahmen beachten, um das Risiko von Feuer, Stromschlägen und Verletzungen zu minimieren. Zu beachten sind u.a.
THINGS YOU MUST REMEMBER BEFORE WORKING ON YOUR COMPUTER LET YOUR COMPUTER ACCLIMATE ITSELF Your notebook can easily stand temperature extremes but it doesn’t like rapid changes in temperature, like going from the cold outdoors to a warm office. Rapid changes in temperature can cause water droplets to condense inside your case, threatening to damage the electronic parts inside.
Introduction WELCOME TO THE NOTEBOOK PC Congratulations on your purchase of the Notebook PC. Your Notebook features the latest advances in portable computing technology. The Notebook’s modular design provides maximum expandability without compromising portability. GETTING TO KNOW YOUR COMPUTER Opening the LCD Panel At the front of the Notebook you will find a retaining latch on the display panel that locks the display in closed position when the Notebook is not in use.
Each of these features is briefly described below. 1. LIGHT-TO-VOLTAGE CONVERTER MODULE This computer provides a Light-to-voltage converter module which is a sensor directly proportional to the light intensity of your surrounding working environment. This will affect the backlight intensity (bright/dark) of your screen display.
¾ Controlling the backlight intensity manually Use the hot-key combination of Fn+F7 and Fn+F8 respectively to decrease/increase the brightness of your LCD display. The Light-to-voltage converter module function will be terminated immediately after you implement these two manual adjustments of your computer backlight intensity. ¾ 2. 3.
5. 6. WIRELESS LAN BUTTON PLAY DVD/CAMERA BUTTON (OPTION) For option, the system is equip with a camera to open the built-in camera application. 7. EMAIL/MP3 BUTTON (OPTION) For option, the system provides you with a button of simplified user’s interface function to play music without booting your windows system. 8. 9. 10. 11. 12.
LED Indicators These two LED indicators are separately program for the following functions: Suspend Mode and Battery Charge. 1. 3. 4. 5. 6. BATTERY CHARGE This indicator will lit green when the battery is in charging status. When the indicator light turns off, it indicates the system is in full charge. AUDIO LINE OUT JACK MICROPHONE JACK IEEE 1394 PORT SPEAKERS 2. SUSPEND MODE This indicator will lit orange when the notebook enter the suspend mode.
THE LEFT SIDE 1. 2. KENSINGTON LOCK THE MODEM PORT Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. To reduce the risk of fire use only No. 26 AWG or larger telecommunication line cord. 3. 4. 5. 6.
7. 8. EXPRESS CARD SOCKET CARDREADER Be sure the face of the card must be facing down when inserting it to the cardreader slot.
THE RIGHT SIDE 1. 2. THE CD-ROM/DVD-ROM OR DVD CD-RW COMBO THE LAN PORT When using a LAN, please use an EMI Shielding Cable to minimize an inteference when transmitting. 3. 4. 5.
THE BOTTOM PANEL 1. 2. 3. 4.
Page intentionally left blank 20
Getting Started CONNECTING TO A POWER SOURCE CONNECTING THE AC ADAPTER A universal AC adapter is provided to supply your computer with power and also charge the computer’s battery pack. The adapter’s AC input voltage can range anywhere from 100 to 240 volts, covering the standard voltages available in almost every country. The power cord for the AC adapter requires a three-hole grounded AC outlet.
TURNING ON YOUR NOTEBOOK COMPUTER Turn on your Notebook by pressing the power button. Hold the button down for a second or two and release. The Power-On Self Test (POST) runs automatically. After the POST is completed, the computer reads the operating system from the hard disk drive into computer memory (this is commonly referred to as “booting” a computer). If your OS (Operating System such as Windows XP…. etc) is installed, it should start automatically.
Gently lower the battery into the bay and push it until it clicks securely in the bay. To remove the battery pack: 3. 1. 2. Turn off the notebook, and disconnect the AC adapter. Close the LCD panel and turn it over and place it on a solid, flat surface. Lift the release latch to release the battery from the bay. At this time the battery will now be angled slightly out of the bay. Hold the battery at the finger grip and lift it out of the compartment.
24
Using the Notebook Computer ADJUSTING THE LCD SCREEN DISPLAY The LCD screen display can be adjusted by the following key combinations. KEYS [Fn] + [F7] [Fn] + [F8] [Fn] + [F10] [Fn] + [F12] FUNCTIONS Decreases the brightness level. Increases the brightness level. Use this key combination to expand your video screen or reset to its original size. This key combination toggles the display between the LCD, CRT, simultaneous LCD/CRT LCD CARE LCD screens are delicate devices that need careful handling.
For information on connecting an external display, please refer to Chapter Four. A TOUR OF THE NOTEBOOK’S KEYBOARD The Notebook’s keyboard uses a standard QWERTY layout with the addition of special function keys and an embedded numeric keypad for number intensive data entry. Your keyboard supports Windows by incorporating the two Windows specific keys. With the two Windows keys you will be able to access and take advantage of many of the timesaving features of Windows software.
KEYS Mail/MP3 Button Wireless Button [Fn] + [F2] [Fn] + [F3] [Fn] + [F4] [Fn] + [F5] [Fn] + [F7] [Fn] + [F8] [Fn] + [F10] [Fn] + [F12] FUNCTION(S) Press this button to open Email/play MP3 files (option) Press this button to On/Off wireless function Turns on/off the volume. Decreases the speaker volume. Increases the speaker volume. Enable/Disable the system Touchpad function Decreases the brightness level. Increases the brightness level.
You can use the TouchPad with Microsoft Windows as well as nonWindows applications. THE CD-ROM, DVD-ROM, COMBO DRIVE (DVD-ROM + CD-RW), DVD DUAL (DVD+/-RW), SUPER MULTI (DVD-RAM+DVD+/-RW) FEATURES OF THE CD-ROM, DVD-ROM, COMBO DRIVE (DVD-ROM + CD-RW), DVD DUAL (DVD+/-RW), SUPER MULTI (DVDRAM+DVD+/-RW) The features of the CD-ROM, DVD-ROM, Combo Drive (DVDROM + CD-RW), DVD Dual (DVD+/-RW), Super Multi (DVDRAM+DVD+/-RW) are listed below.
3. Push the tray back into the drive. To remove a CD disc, do the following: 1. 2. 3. Check the LED display and make sure that the computer is not accessing the CD-ROM, DVD-ROM, Combo Drive (DVD-ROM + CD-RW), DVD Dual (DVD+/-RW), Super Multi (DVDRAM+DVD+/-RW). Push the eject button and pull the tray all the way out. Carefully pick up the CD disc by the edges and – while pressing down on the center ring – remove the CD disc from the tray. Do not insert any foreign objects into the disc tray.
Please refer to the topic on “Battery Calibration” describing how to calibrate your system battery discussed on the latter part of this chapter. If you discover the battery life is getting shorter, please perform the “Battery Calibration” process immediately. REMOVING THE BATTERY PACK To remove the battery pack from its compartment, please refer to Chapter 3, Inserting and Removing the Battery Pack.
Pre-Charge A pre-charge is supplied to the Li-Ion battery pack. Battery Status Windows XP has an applet in the Control Panel that will display an icon in the Windows taskbar indicating when the Notebook is running on battery power or is attached to the AC adapter. This applet also displays a meter that indicates how much charge is remaining in the battery. Battery Low Warning When the pack initially reaches the “Battery Low” state approximately 10 ~ 15 minutes of the usable battery life is left.
BATTERY CALIBRATION The purpose for this process is to provide a longer battery life for your system battery pack. 1. Turn on the computer, when the text appears, press [Del] or the [Delete] key until the system enters the BIOS Setup screen, you may now make the necessary changes. 2. Press the Î arrow key until it reaches the “Exit” menu screen. Again press the Ð arrow key and select the “Battery Calibration” item.
USING THE WINDOWS HELP WINDOWS For Windows XP help, click Start ÎHelp and Support icon will open the dialog box. DESKTOP Desktop may vary differently on the software installed in your notebook with different or additional shortcuts.
Recycle Bin Used for storing deleted files in case you want to recover and save it in your system. The files will only be deleted from the Recycle Bin permanently only if you empty it by right clicking your mouse and select the “Empty Recycle Bin”. Start Button The Start menu allows you Allows easy access to all to adapt and show the Windows programs. programs used most frequently. If you wish to keep an item, right click the item and click Pin to Start menu.
CONTROL PANEL It is in this area that you can change how Windows looks and works. Click Start Î Control Panel dialog box. There are two interfaces – Classic View or Category View.
36
Desktop Operation Your notebook is capable of providing you with efficient and productive mobile computing, it also has the speed and capacity to service as a desktop system. This chapter discusses those functions of your notebook that are typical of desktop systems. AUDIO THE MULTIMEDIA SOUND SYSTEM The Notebook’s built-in audio capabilities allow you to take advantage of a wide range of education and entertainment multimedia software.
AUDIO SOFTWARE Your notebook comes equipped with an integrated sound system capable of providing you with quality audio sound through the builtin speakers or through external speakers connected via the system ports. SOUND RECORDING Your system allows you to record sounds and store them as files using the microphone via the microphone jack on the rear of the notebook computer. Check the Windows Help and Support Center in Windows for information on using the various elements in sound recording.
CONNECTING PERIPHERAL DEVICES To expand your computing capabilities, you can add a variety of external devices to your computer.
Page intentionally left blank 40
Internet Connection There are numerous ways to connect to the Internet. This may vary from the user’s working environment as well as system specifications. ^ Using a modem and a telephone line ^ Using a wired LAN ^ Using a wireless LAN (Optional) USING A MODEM FOR CONNECTION TO INTERNET ^ ^ Use a telephone line to connect to the modem port of your computer. Do not use a digital telephone line.
42 4. Select “Properties” from the popup menu that appears 5. In the “This connection uses the following items” field, select “Internet Protocol (TCP/IP), and click “Properties”.
6. Enter the system’s IP and DNS server addresses on the General tab of the “Internet Protocol (TCP/IP) Properties” window. If DHCP is used, click “Obtain an IP address automatically” and “Obtain DNS server address automatically” on the General tab.
7. After all the all the information are correctly entered in the “Internet Protocol (TCP/IP) Properties” window, click “OK” to finish. USING BOTH DHCP AND STATIC IP FOR CONNECTION TO INTERNET When you are alternatively using networks with either DHCP or static IP addressing, you can use alternative settings that enable simultaneous configurations of DHCP and static IP to use both of the network connects without reconfiguring. 1.
3. When you have completed the entire configuration, click “OK”.
USING WIRELESS LAN NETWORK FOR CONNECTION TO INTERNET (MICROSOFT’S SERVICE PACK 2) (OPTIONAL) 46
Running BIOS Setup The BIOS (Basic Input and Output System) Setup program is a menu driven utility that enables you to make changes to the system configuration and tailor your system to reflect installed hardware or alter system performance. When the Notebook is turned back on, the system is configured with the values stored in CMOS.
Advanced - Use this menu to enable and make changes to the advanced features available on your system. Boot - Use this menu to configure the default system device used to locate and load the Operating System and for booting up the Notebook. Security - Use this menu to set a password. The password allows bootup and controls access to the BIOS setup menu. Exit - Use this menu to exit the current menu or specify how to exit the Setup program.
Legend Key Alternate Key Function their default values. F10 Save and Exit. Enter Will select a sub menu or show a range of options for a field. LAUNCHING SUBMENUS Note that a right pointer symbol X appears to the left of certain fields. This pointer indicates that a submenu can be launched from this field. A submenu contains additional options for a field parameter. To call up a submenu, simply move the cursor to highlight the field and press the [Enter] key.
THE MAIN MENU When the Setup program is accessed, the following screen appears: 50
THE ADVANCED MENU Selecting Advanced from the menu bar displays the Advanced menu: 51
THE BOOT MENU The Boot menu allows the user to specify the order in which the Notebook is to check for a device to boot the system. You can also configure the way that the system will boot up. To make changes, select Boot from the menu bar.
THE SECURITY MENU The Notebook’s advanced system of security allows you to set a password to prevent unauthorized access to system resources, data, and the BIOS Setup Program.
THE EXIT MENU Once you have made all of your selections from the various menus in the Setup program, you should save your changes and exit Setup.
VGA Utilities After you have restarted Windows, open the “Control Panel” and double click on the “Display” icon. From the “Display Properties” window, select the “Settings” tab and click on the “Advanced” tab to enter the “ATI Mobility Radeon X1300 (Default LCD)”.
56
57
58
Troubleshooting This chapter describes locating and solving problems that you may encounter while using your computer. LOCATING A PROBLEM Problems with your computer can be caused by something as minor as an unplugged power cord – or as major as a damaged hard disk. The information in this chapter is designed to help you find and solve minor problems. If you try all the suggested solutions and you still have a problem, make a list of what steps you have taken to correct the problem and contact your dealer.
To check the power cables, and connections: 1. If you have been using battery power, connect the Notebook to an external power source and make sure that the battery has a charge. 2. If you are using the Notebook with the AC adapter, check the power outlet, the power cord, and any power switches that may affect your computer. 3. Check the wall outlet or power strip with an item that you know is functioning properly. A lamp or radio is a convenient item for checking the power.
Normally, the only test routine visible on the screen will be the memory test. Two classifications of malfunctions can be detected during the POST: ^ Error messages that indicate a failure with either the hardware, the software, or the Basic Input/Output System (BIOS). These critical malfunctions prevent the computer from operating at all or could cause incorrect and apparent results. An example of a critical error is microprocessor malfunction.
Solution: Correct the date and time using the DOS DATE and TIME commands or the options in the Setup Utility. If the date and time become incorrect after a short time, your CMOS battery may be depleted. Contact your dealer to change the battery. Problem: You hear irregular beeps during operation of the Notebook and the system halts. Solution: The problem is beyond the scope of this manual. Contact technical support. Problem: An unidentified message is displayed.
^ ^ ^ What messages, if any, are on the screen? What software were you running at the time? What have you done already to try to solve the problem? If you have overlooked a step, your dealer may be able to solve the problem over the phone.
64
Upgrading your System 65
UPGRADING YOUR SYSTEM CPU Refer to the following illustration on upgrading your notebook's CPU Be sure to loosen all the screws first before removing it totally to release the heatsink. Failure to do so will cause a major damage to the heatsink.
UPGRADING YOUR MEMORY 67
THE EASY TO UPGRADE HDD MODULE The hard drive in your notebook computer is made to be easily swapped out for upgrading.
Specification PROCESSOR Intel® CoreTM Dual Processor, 2MB L2 cache, 667 MHz FSB Intel® CoreTM Solo Processor, 2MB L2 cache, 667 MHz FSB ^ ^ OPERATING SYSTEM COMPLIANCE ^ genuine Windows® XP Professional ^ genuine Windows® XP Home Edition CORE LOGIC ^ Intel® 945 PM(Calistoga)+ ICH7-M MEMORY Expansion 2 slots of 200pin SO-DIMM DDR2 module, total 2GB memory capacity ^ Support DDRII 667/533/400 module ^ LCD DISPLAY ^ 14.
AV FEATURE BUILT-IN TV Tuner ^ Built-in analog or digital (DVB-T protocol) (Option) ^ Supports capture function to record the TV programs into HDD POINTING DEVICE ^ Touchpad APPLICATION LAUNCH KEY Wireless, Picture/Play DVD, Mail/Instant MP3, Power ^ LED STATUS INDICATOR ^ Suspend/Resume, Battery Charging Status, Hard Disk Access, NumLock mode, CapsLock mode, ScrollLock mode KEYBOARD ^ 3.
BIOS ^ AMI, Support PnP, password ,Bootable from USB Disk/ Optical device COMMUNICATION ^ 10/100/1000Mbps PCI-E Gigabit Ethernet on board ^ Built-in MDC V.90 56Kbps Fax/Modem (Option) ^ Intel® PRO/Wireless 3945ABG (802.11a/b/g) network connection (Mini card interface) (Option) ^ Bluetooth module ver. 2.
