Preface Copyright 2004 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Notices Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
There is no internal power supply. Canadian DOC Notice For Class B Computing Devices This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Cet appareil numerique de la classe B repecte toutes les exigences du Règlement sur le matèriel brouilleur du Canada.
Page intentionally left blank 4
Table Of Contents Chapter 1: Before you Start ------------------------------------------------------1 Conventions of This Manual.......................................................................................................................... 1 Things you must remember before working on your computer ..................................................................... 8 Chapter 2: Introduction ------------------------------------------------------------11 Welcome to the Notebook PC................
The Menu Bar ................................................................................................................................................ 50 The Legend Bar.............................................................................................................................................. 51 Launching Submenus..................................................................................................................................... 51 General Help .......................
Before you Start Conventions of This Manual Use this manual will help you get the most from your notebook computer. • If you are an experienced user of computers and/or Microsoft’s Windows operating systems, you might find it useful to read the Quick Star t Guide that comes along with your accessories. • If you are a less experienced user, you should through the manual carefully before using your system.
The check mark symbol indicates that you should take note on every detailed information when you encounter some function that might be useful when you are using your notebook. The pencil symbol identifies information which is important for you to read to avoid damage to the computer. This warning cautions you against actions which might be destructive to your data or might disrupt proper system operation.
8. Place the power cord in such a way that people can not step on it. Do not place anything on top of the power cord. 9. All cautions and warnings on the equipment should be noted. 10. If the equipment is not use for a long time, disconnect the equipment from the main power outlet to avoid being damaged by transient overvoltage. 11. Never pour any liquid into the opening, this could cause fire or electrical shock. 12. Never open the equipment.
A. For U.S. and Canada: • • The cord set must be UL Listed and CSA Certified. The minimum specifications for the flexible cord are No. 18 AWG. B. For Japan: • • All components of the cord set must bear a “PSE” or “ T ” mark and registration number in accordance with the Japanese Dentori Law. The minimum specifications for the flexible cord are .75m ㎡ conductors. C. For Other Countries: • 18. 19. 20. 21.
or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. Never remove the battery pack while the power is on as this may result in data loss when the system loses power. 22. The input receptacle is used as the main disconnecting device. Wichtige Sicherheitshinweise 1. Bitte lesen Sie diese Hinweis sorgfältig durch. 2. 3. Heben Sie dirse Anleitung für den späteren Gebrauch auf. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen.
a. b. c. d. Netzlabel oder Netzstecker sind beschädigt. Flüssigkeit ist in das Gerät eingedrungen. Das Gerät war Feuchtigkeit ausgesetzt. Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen. e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt. f. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist. 14. VORSICHT: Explosiongsgetahr bei unsachgemäßen Austausch der Batterie.
• 18. 19. 20. 21. 22. Die Zubehörteile des Kabel-Sets müssen das Prüfsiegel derjenigen Stelle, die in dem jeweiligen Land für die Sicherheitsprüfung zuständig ist, tragen. • Das Kabel muss vom HAR (harmonisierten) Typ H05VV-F sein. • Das Kabel-Set muss eine Stromkapazität von mindestens 2,5 Ampere haben und Spannungen von 125 oder 250 V Wechselstrom gestatten.
Things you must remember before working on your computer Let your computer acclimate itself Your notebook can easily stand temperature extremes but it doesn’t like rapid changes in temperature, like going from the cold outdoors to a warm office. Rapid changes in temperature can cause water droplets to condense inside your case, threatening to damage the electronic parts inside.
There are some things you can tolerate that the computer can’t — things like static electricity, dust, water, steam and oil. In case you decide to pull over for roadside computing, try to choose a clean, comfortable work area for your system. A lithium-ion battery pack will be available when you are traveling. If you are running your system for the first time on battery power, remove the battery from the package, install it into the system and recharge the battery to fully prepare for service.
Page intentionally left blank 10
Introduction There are more and more people spending large amounts of time in front of computer monitors now that scientists from many fields including anatomy, psychology, and occupational safety are involved in the study of ergonomically sound work environments. A few tips to help you work effectively without a lot of physical discomfort: • Purchase a chair with armrests and good back support. Don't slouch when sitting; keep your back straight.
Welcome to the Notebook PC Congratulations on your purchase of the Notebook PC. Your Notebook features the latest advances in portable computing technology. The Notebook’s modular design provides maximum expandability without compromising portability. The highperformance CPU and enhanced IDE hard drive provides you with extra processing power for handling complex graphics and running large programs. One PCMCIA slot gives you the ability to use standard PCMCIA cards, such as a LAN adapter or memory cards.
To avoid damage to the display panel: 1. Try not to slam the display upon closing it. 2. Try not to place any object on top when it is closed or open. 3. Be sure the system is turned off or in suspend mode before you close the display panel. To shutdown the system in non-Windows (DOS mode, System POST, Setup Menu or Quick Boot Menu) based environment, enable the lid switch. This will prevent the system from damaged if it exceeds the temperature limit.
Each of these features is briefly described below. 1. LCD Cover Release Latch Slide this latch to the right to open the LCD cover. 2. LCD Screen Your Notebook computer is equipped with a replaceable color Liquid Crystal Display (LCD) screen that supports up to 1024 x 768 or 1400 x 1050 x 16M LCD resolution utilizing a AGP BUS. A built-in backlight allows you to comfortably view the screen even when ambient lighting is low. 3. Internet Explorer Button Use this key to open the Internet Explorer. 4.
produces lowercase text. Indicates when the keyboard is in Scroll Lock mode. Some applications will move information across the screen differently when Scroll Lock is on.
6. Power/Resume Button Pressing this button for 1-2 seconds will turn on the system or pressing this button when the computer is in Suspend mode will resume normal operation. Pressing this button for 4-6 seconds will also turn off the system. 7. TouchPad The TouchPad is hardware-compatible with the IBM PS/2 mouse and softwarecompatible with the Microsoft mouse. 8. TouchPad Buttons The buttons below the TouchPad correspond to the left and right buttons on a standard mouse.
The Left Side 1. Ventilation Opening Please don’t block this opening during operation of the system. 2. 1394A A very fast external bus standard that supports data transfer rates of up to 400 Mbps (400 million bits per second).
Can be used to connect up 63 external devices, also supports isochronous data -delivering data at a guaranteed rate. This makes it ideal for devices that need to transfer high levels of data in real-time, such as video devices. Also supports both Plug-and-Play and hot plugging, and also provides power to peripheral devices. 3. PCMCIA Socket Cover Open this cover to access the PCMCIA socket. The computer’s PCMCIA socket lets you extend the capabilities of your computer by inserting PC cards. 4.
8. Audio Line Out Jack You can plug an external speaker, headphone or connect the line out jack to an audio device such as a cassette recorder to record the notebook's audio output. LED Indicators These three LED indicators are separately program for the following functions: Power On, Suspend Mode and Battery Charge. 1. Power On This indicator will lit when the notebook is powered On. 2. Battery Charge This indicator will lit green when the battery is in charging status.
The Right Side 1. The CD-ROM/DVD-ROM or DVD CD-RW Combo (Option) Your Notebook comes with a swappable 24X (or higher) 5.25" IDE CD-ROM or 8X DVD-ROM. 2. DC IN Connector Plug the AC adapter into this connector.
The Rear 1. Ventilation Opening Please don't block this opening during operation of the system.
2. Kensington Lock Allows you to connect a special computer lock to secure your system. You can purchase a lock at most computer retailers. 3. S-Video Port Allows you to connect any S-Video ready television to your system. You can display output simultaneously on both the LCD and the television or toggle between the two screens. 4. Parallel Port This port allows you to easily connect a parallel printer or plotter using this 25-pin bidirectional female port. 5.
The Bottom Panel 1. MiniPCI/Wireless LAN/Modem Combo Compartment (Option) This compartment can be used to extend the capabilities of your system by providing a connection with various extension card.
2. Battery Release Latch Lift up this latch to release the battery from its bay. 3. Expansion Compartment This compartment will serve as an expansion to upgrade your RAM module. 4. Battery Your notebook comes equipped with a factory-installed battery pack module. After the battery runs down, the module can be removed and replaced with a charged battery. 5. Hard Disk Drive Your computer includes a 2.5-inch IDE hard disk drive (9.5mm in height).
Getting Started Connecting to a Power Source Connecting the AC Adapter A universal AC adapter is provided to supply your computer with power and also charge the computer’s battery pack. The adapter’s AC input voltage can range anywhere from 100 to 240 volts, covering the standard voltages available in almost every country. The power cord for the AC adapter requires a three-hole grounded AC outlet.
1. Plug the AC adapter’s connector into the DC-IN connector on the rear of the computer. 2. Connect the power cord to the AC adapter and then to a wall outlet. The best kind of AC power source to connect your Notebook to is a UPS (Uninterruptible Power Supply). Lacking this, use a power strip with a builtin surge protector. Do not use inferior extension cords as this may result in damage to your Notebook. The Notebook comes with its own AC adapter.
Turning On Your Notebook Computer Turn on your Notebook by pressing the power button. Hold the button down for a second or two and release. The Power-On Self Test (POST) runs automatically. After the POST is completed, the computer reads the operating system from the hard disk drive into computer memory (this is commonly referred to as “booting” a computer). If your OS (Operating System such as Windows ME, Windows 2000…. etc) is installed, it should start automatically.
Inserting and Removing the Battery Pack The battery pack should already be inserted in your Notebook computer when you unpack it. If not inserted, follow these directions: 1. Turn over the notebook with the front of the unit facing you and place it on a solid, flat surface. 2. Angle the battery into the bay. The front edge of the battery should slide into the grooves in the system case. 3. Gently lower the battery into the bay and push it until it clicks securely in the bay.
3. Hold the battery at the finger grip and lift it out of the compartment. Charging the Battery Pack The installed battery pack charges automatically any time the computer is connected to the AC adapter and an external power source. It is a good idea to occasionally discharge the battery pack fully to preserve its operating performance.
Page intentionally left blank 30
Using the Notebook Computer Adjusting the LCD Screen Display The LCD screen display can be adjusted by the following key combinations. KEYS [Fn] + [F7] [Fn] + [F8] [Fn] + [F10] [Fn] + [F12] FUNCTIONS Decreases the brightness level. Increases the brightness level. Use this key combination to expand your video screen or reset to its original size. This key combination toggles the display between the LCD, CRT, simultaneous LCD/CRT, TV, simultaneous CRT/TV.
LCD Care LCD screens are delicate devices that need careful handling. Please pay attention to the following precautions: • When you are not using the computer, keep the LCD screen closed to protect it from dust. • If you need to clean your LCD screen, use a soft tissue to gently wipe the LCD surface. • Do not put your fingers or sharp objects directly on the surface and never spray cleaner directly onto the display. • Do not press on, or store any objects on the cover when it is closed.
A Tour of the Notebook’s Keyboard The Notebook’s keyboard uses a standard QWERTY layout with the addition of special function keys and an embedded numeric keypad for number intensive data entry. Your keyboard supports Windows by incorporating the two Windows specific keys. With the two Windows keys you will be able to access and take advantage of many of the timesaving features of Windows software.
The Notebook’s Hot Key Controls KEYS FUNCTION(S) Power Button Press this button once to power on or enter the suspend/resume mode. Press this button for more than 4 seconds to power off the system.
TouchPad Precautions The TouchPad is a pressure sensitive device. precautions. Please take note of the following • Make sure the TouchPad does not come into contact with dirt, liquids or grease. • Do not touch the TouchPad if your fingers are dirty. • Do not rest heavy objects on the TouchPad or the TouchPad buttons. You can use the TouchPad with Microsoft Windows as well as non-Windows applications.
Connecting an External Tracking Devices The system will only enables you to use one tracking device whether it is an internal or external tracking device. Data Storage and Retrieval Data storage and retrieval are two of the most fundamental tasks you will perform when working with your computer. The Notebook is equipped with a hard disk drive (HDD). The HDD is removable allowing for easy upgrades.
• Do not write or place objects on the surface of the disc. • Store discs in a cool dry place not to damage the disc. • Do not use benzene, thinners, or cleaners with detergent. Only use CDROM/DVD-ROM cleaning kits. • Do not bend or drop the discs. Loading a Disc To play a CD disc, follow the instructions listed below. 1. Push the CD-ROM/DVD-ROM/Combo eject button on the CD drive door. Gently pull the tray all the way out. 2.
Do not insert any foreign objects into the disc tray. If you experience difficulty when ejecting the CD disk tray, stretch a paper clip (or use a pin or a thin metal rod) and insert it into the emergency eject hole located on the right side of the front panel. The CD disk tray should eject immediately. This procedure can also be used to remove a CD from the drive when the Notebook is powered off.
PCMCIA Cards and Expansion Sockets The Notebook features one PCMCIA expansion socket design to interface with one Type II card. Inserting a PCMCIA Card The computer will emit a medium tone followed by a high tone when a PC card is inserted. When you eject a card, the computer will emit a high tone followed by a medium tone. You can insert and remove a PC card whether the computer is turned On or Off. Follow these instructions to insert a PCMCIA card: 1.
Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Power Saving Modes This section contains information on the Notebook’s power system, including the AC Adapter, the battery system, recharging the battery, and tips for conserving battery power. The power system is comprised of two parts, the AC Adapter and the battery system.
Preparing the Battery Pack for Use Before using the battery pack for the first time, the Smart Battery IC within the battery pack should be calibrated in order to get accurate reporting of remaining battery life status. To calibrate the battery pack follows the instructions below: 1. Insert the battery into the battery compartment and turn on the Notebook. If the battery is completely without power go to the next step. Otherwise, let the battery run down until the battery low-low warning beeps are heard.
Charge Mode Fast Pre-Charge Charge Time 3 hours with the system off or in Suspend mode. The temperature must be 25°C or below room temperature. A pre-charge is supplied to the Li-Ion battery pack. Battery Status Windows 2000/XP has an applet in the Control Panel that will display an icon in the Windows taskbar indicating when the Notebook is running on battery power or is attached to the AC adapter. This applet also displays a meter that indicates how much charge is remaining in the battery.
When there is only one minute of battery charge remaining, the Notebook will suspend to the HDD and power off. You should connect AC power and resume to save your work. Small Battery for the Real Time Clock There is a small built-in battery pack that supplies power to the system in order to maintain certain system information while the power is off. If the Notebook is left without a power source for long period of time, this battery will be exhausted and system information will be lost.
Adjusting the Brightness To adjust the brightness on the LCD screen, press and hold down the [Fn] key in the lower left hand corner of the keyboard and press the [F7] key to reduce the brightness or [F8] to increase the brightness.
Desktop Operation Your notebook is capable of providing you with efficient and productive mobile computing, it also has the speed and capacity to service as a desktop system. This chapter discusses those functions of your notebook that are typical of desktop systems. Audio The Multimedia Sound System The Notebook’s built-in audio capabilities allow you to take advantage of a wide range of education and entertainment multimedia software.
An external microphone can be connected to the microphone jack. External speakers or headphones can be connected to the Notebook’s audio-out jack. External audio devices can be connected to the Line in jack. All audio features are software controlled.
Sound Recording Your system allows you to record sounds and store them as files using the microphone via the microphone jack on the rear of the notebook computer. Check the Windows Help and Support Center in Windows for information on using the various elements in sound recording. For a high-quality sound, click on the "Volume Control" at the lower right end of your screen. From the Volume Control windows, click on the "Advanced" tab, click and select the "Microphone Boost" item.
48
Running BIOS Setup Introduction The BIOS (Basic Input and Output System) Setup program is a menu driven utility that enables you to make changes to the system configuration and tailor your system to reflect installed hardware or alter system performance. When the Notebook is turned back on, the system is configured with the values stored in CMOS.
The settings made in the BIOS Setup program intimately affect how the Notebook performs. Navigating through BIOS Setup The Setup program has been designed to make it as easy to use as possible. If you accidentally make a setting and don’t know which one to switch back to, the Setup program has a hot key that allows you to return to the previous value. Accessing the BIOS Setup Program To access the BIOS Setup program, press the DEL key after the Notebook has run through its POST.
Boot - Use this menu to configure the default system device used to locate and load the Operating System and for booting up the Notebook. Exit - Use this menu to exit the current menu or specify how to exit the Setup program. To access the menu bar items, press the right or left arrow key on the keyboard until the desired item is highlighted. The Legend Bar At the bottom of the Setup screen you will notice a legend bar. The keys in the legend bar allow you to navigate through the various setup menus.
A submenu contains additional options for a field parameter. To call up a submenu, simply move the cursor to highlight the field and press the [Enter] key. Use the [Esc] key to return to the Main menu. General Help In addition to the Item Specific Help window, the BIOS Setup program also provides a General Help screen can be called up from any menu by simply pressing [F1] or the [Alt] + [H] combination.
The Main Menu When the Setup program is accessed, the following screen appears: System Time Sets your system to the time that you specify. The format is hour, minute, second. Use the [Tab] or [Shift] + [Tab] keys to move between the hour, minute, and second fields.
System Date Sets your system to the date that you specify (usually the current date). The format is month, day, year. Use the [Tab] or [Shift] + [Tab] keys to move between the month, day, and year fields.
SuperIO Configuration Use this setting to configure your SuperIO Chipset. Quick Boot Allows BIOS to skip certain test while booting. This will decrease the time needed to boot the system The configurations are: Disabled or Enabled (default value) Quiet Boot Disabled: Displays normal POST messages. Enabled: Displays OEM Logo instead of POST messages. The configurations are: Disabled (default value) or Enabled PS/2 Mouse Support Use this setting to select support for PS/2 mouse.
The Security Menu The Notebook’s advanced system of security allows you to set a password to prevent unauthorized access to system resources, data, and the BIOS Setup Program.
The Boot Menu The Boot menu allows the user to specify the order in which the Notebook is to check for a device to boot the system. You can also configure the way that the system will boot up. To make changes, select Boot from the menu bar.
The Exit Menu Once you have made all of your selections from the various menus in the Setup program, you should save your changes and exit Setup.
The Software Utilities Disks AutoRun Installation Follow the step-by-step procedures on the CD-ROM/DVD-ROM to execute the “AutoRun” application by selecting the topic of “Driver Installation”.
Click on the “Start” — “Setting” — “Control Panel” — “System” — “Advanced” tab — “Performance” tab — “Change” tab — reduce the maximum Virtual Memory setting to 200MB. Installing the AGP Driver for Win2K/XP To install the AGP driver you must first remove the currently installed driver. • Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive. • Click “Star t” and Select “Run”. • Type the following: D:\Driver\AGP\setup.
Intalling the Audio Driver for Win2K/XP To install the audio driver you must first remove the currently installed driver. • Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive. • Click “Star t” and Select “Run”. • Type the following: D:\Driver\Audio\Setup.exe (If D is not your CD-ROM/DVDROM drive, substitute D with the correct drive letter). • Click on “Setup” to begin the Installation Wizard. • Follow the Wizard’s on-screen instructions to complete the installation. • Restart the system.
• Click “Star t” and Select “Run”. • Type the following: D:\Driver\LAN\Setup.exe (If D is not your CD-ROM/DVDROM drive, substitute D with the correct drive letter). • Click on “Setup” to begin the Installation Wizard. • Follow the Wizard’s on-screen instructions to complete the installation. • Restart the system. Installing the TouchPad Driver for Win2K/XP To install the touchpad driver you must first remove the currently installed driver.
• Type the following: D:\Driver\MDC\LiteOn\Modem\Win2KXP\Setup.exe (If D is not your CD-ROM/DVD-ROM drive, substitute D with the correct drive letter). • Click on “Setup” to begin the Installation Wizard. • Follow the Wizard’s on-screen instructions to complete the installation. • Restart the system. Installing the Billionton/SmartLink Modem Driver for Win2KXP Please follow these instructions to install the Modem driver: • Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive.
• Type the following: D:\Driver\MDC\Actiontec\Modem\Win2KXP\Setup.exe (If D is not your CD-ROM/DVD-ROM drive, substitute D with the correct drive letter). • Click on “Setup” to begin the Installation Wizard. • Follow the Wizard’s on-screen instructions to complete the installation. • Restart the system.
802MKG) D:\Driver\MiniPCI\Actiontec\LAN_802MKG\2K\RT2500.INF(Win2K QCOM 802MKG) D:\Driver\MiniPCI\MSI\802.11G\XP\RT2500.INF(WinXP MSI 802.11G) D:\Driver\MiniPCI\MSI\802.11G\2K\RT2500.INF(Win2K MSI 802.11G) VGA Utilities After you have restarted Windows, open the “Control Panel” and double click on the “Display” icon. From the “Display Properties” window, select the “Settings” tab and click on the “Advanced” tab to enter the “Default Monitor and MOBILITY RADEON 9600 Properties" window.
You will notice there are numerous options included in the Display Properties window: Displays, color, OpenGL, Direct 3D, Overlay and Options.
Color You can adjust the right resolution for your screen display.
OpenGL Play the latest and greatest OpenGL based games as well as CAD/Design programs.
Direct 3D An API for manipulating and displaying 3-dimensional objects.
Options Display all the items concerning the ATI related function.
Overlay 71
Troubleshooting This chapter describes locating and solving problems that you may encounter while using your computer. Locating a Problem Problems with your computer can be caused by something as minor as an unplugged power cord — or as major as a damaged hard disk. The information in this chapter is designed to help you find and solve minor problems.
into electrical and mechanical problems. You will know you have a hardware problem if the screen is dark, the computer cannot read the disk drives, or you get an error message during the Power-On Self Test (POST). Software errors can occur at several levels. The ROM BIOS and the operating system can give you a large number of error messages. On top of this, each application software package has its own set of error messages.
3. With the computer’s power switched off, check all cable connections. If the computer is connected to any peripheral devices, look for loose or disconnected cables. If the computer is too close to a wall, a cable connection may be loose or the cables may be crimped. Do not substitute cables for different devices (other than the manufacturer recommended cables) even if they look exactly alike. The wiring inside the cable may be different. 4.
incorrect results that may not be readily apparent. An example of a non-critical error would be a memory chip failure. In general, if the POST detects a system board failure (a critical error), the computer halts and generates a series of beeps. If failure is detected in an area other than the system board (such as the display, keyboard, or an adapter card) an error message is displayed on the screen and testing is stopped.
The message: “Invalid system disk, Replace the disk, and then press any key” appears during boot. Problem: Solution: Check and make sure that you do not have a non-bootable floppy diskette inserted in your floppy drive. If your USB FDD is empty, you may not have an operating system installed on your drive. Contact technical support for assistance. Problem: You hear irregular beeps during operation of the Notebook and the system halts. Solution: The problem is beyond the scope of this manual.
Problem: The diskette is write-protected. Solution: Eject the diskette, remove the write protection, and try again. Problem: The diskette if full. Solution: Try using another diskette or free up some space on the diskette. The disk drive is not operating. Contact your dealer for support. Problem: You cannot use the mouse. • • • Check the cable connection. Check the mouse with another application to see if there is a software incompatibility problem.
Upgrading your System Upgrading your Memory Refer to the following instructions and illustration for information on upgrading your notebook's memory.
1. Turn off the computer and disconnect the AC adapter and all peripherals. 2. Turn the notebook over so that the rear ports are facing you and locate the memory module compartment. 3. Remove the screws that secure the RAM module compartment cover and set it aside in a safe place. 4. Remove the compartment cover and then angling it up and out. 5. If you need to install a higher capacity module, gently push the edge clips on both sides to release the module.
7. Insert the edge connector into the slot. The gold edge connector of the card should not be visible when the card is fully inserted. 8. Press the card downward where you should hear an audible click as the latches of the connector secure the card in place. 9. Once the module is properly seated, you can replace the cover on this compartment. 10. Replace and tighten the screw. The Easy to Upgrade HDD Module The hard drive in your notebook computer is made to be easily swapped out for upgrading.
To upgrade your Hard Drive 1. Power down the system completely. Turn the system over with the front of the unit facing you.
2. Remove the three screws that secure the compartment cover and set them in a safe place. 3. Slide the HDD cover away from the compartment. 4. The drive is attached to a special bracket that secures it to the notebook computer. There are 4 screws hold the bracket. Remove the screws and set them in a safe place. 5. Push the HDD slightly in the direction of the arrow as shown in the illustration to release it from the pins of the drive. 6.
2. Bend your LCD screen into 90 degree angle then carefully lift up the hinge cover. 3. Remove the screen that is attached to the keyboard in order to remove the heatsink on top of the CPU.
4. Remove all the screws attached to the heatsink. 5. Before removing the screws, there are certain measures to followed in removing the heatsink 6. To remove the heatsink, first loosen the screw carefully. 7. After loosening one screw, be certain that the next to be loosen should be the screw on its adjacent side as shown on the illustration. Be sure to loosen all the screws first before removing it totally to release the heatsink. Failure to do so will cause a major damage to the heatsink. 8.
Page intentionally left blank 85
Specification Detailed Notebook Specifications CPU Core Logic Memory LCD Video & Graphic HDD 86 Intel Pentium-M processor from 1.3GHz to 1.7GHz, 1M L2 cache Intel Dothan processor from 1.8GHz to 2.0GHz, 2M L2 cache Intel ODEM + ICH4-M, support FSB 400MHz 0MB on board, 2 SO-DIMM slots, up to 2GB Support DDR 266/333MHz system memory 14.1”XGA/15”XGA/15” SXGA+ TFT ATI Mobility M10P-CSP64/128, AGP 4X Embedded 64MB/128MB VRAM 2.5” 9.
Optical Drive TouchPad Launch Key Keyboard I/O Port PCMCIA Audio AC Adapter Battery Battery Charge Battery Life BIOS Communication Size Weight 5.25”/12.7mm CD-ROM, DVD-ROM, Combo Drive, DVD+RW, DVD Dual Synaptics w/ scrolling button (4 ways) Hot keys: E-mail, internet hot key 88 keys with 12 function keys and 3 Windows keys 2 x USB2.0 ports, parallel port, VGA port, RJ-11, RJ-45, FIR, 1394a, TVOut , head phone(SPDIF), Mic_in Type II PCMCIA slot, support CardBus AC97 2.1compliant, , 5.
