i
Preface Copyright 2009 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules.
Table of Content BEFORE YOU START ............................................................................... 2 LET YOUR COMPUTER ACCLIMATE ITSELF .............................................. 9 HEAT, COLD, HUMIDITY, AND GLARE .................................................... 9 SUITABLE PLACE TO WORK ................................................................. 10 INTRODUCTION...................................................................................... 12 FRONT VIEW ....................
CALIBRATE COLOR ............................................................................ 55 ADJUST DISPLAY SETTING ................................................................. 55 CONNECT TO A PROJECTOR ............................................................... 56 ADJUST CLEAR TYPE TEXT ................................................................ 56 3G CONNECTION .................................................................................. 58 TROUBLESHOOTING ...........................
1
Before you Start Conventions of This Manual Use this manual will help you get the most from your notebook computer. If you are an experienced user of computers and/or Microsoft’s Windows operating systems, you might find it useful to read the Quick Start Guide that comes along with your accessories. If you are a less experienced user, you should through the manual carefully before using your system.
7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Make sure to use the right voltage for the power source when connecting the equipment to the power outlet. Place the power cord in such a way that people can not step on it. Do not place anything on top of the power cord. All cautions and warnings on the equipment should be noted. If the equipment is not use for a long time, disconnect the equipment from the main power outlet to avoid being damaged by transient overvoltage.
The minimum specifications for the flexible cord are No. 18 AWG, (2) Type SPT-2, and (3) 2-conductor. B. For Japan: All components of the cord set must bear a “PSE” mark and in accordance with the Japanese Dentori Law. The minimum specifications for the flexible cord are .75m ㎡ conductors, (2) Type VCTR or VCTFK, and (3) 2-conductor. The cord set must have minimum rated current capacity of 7 A.
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use the telephone to report a gas leak in the vicinity of the leak. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special instructions. 19. Do not use the AC adapter near open water or other liquids. Never spill liquid into the AC adapter. 20.
Class 1 Laser Product Appareil A Laser De Classe 1 Laserschutzklasse 1 Produkt Do not attempt to disassemble the cabinet containing the laser. The laser beam used in this product is harmful to the eyes. The use of optical instruments, such as magnifying lenses, with this product increase the potential hazard to your eyes. For your safety, have this equipment serviced only by an authorized service provider. Wichtige Sicherheitshinweise Bitte lesen Sie diese Hinweis sorgfältig durch.
13. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen und von einer qualifizierten Servicestelle zu Überprüfung.: a. Netzlabel oder Netzstecker sind beschädigt. b. Flüssigkeit ist in das Gerät eingedrungen. c. Das Gerät war Feuchtigkeit ausgesetzt. d. Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen. e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt. f.
Die Minimalanforderungen für das Kabel sind .75m ㎡ Leiter. (2) Type VCTF oder VCTFK, und (3) 2conductor. Der Kabelsatz muss mindestens für eine Stromstärke von 7A geeignet sein. Der Wandstecker muss ein zweipoliger geerdeter Steckertyp gemäß dem Japanese Industrial Standard C8303 (15A, 125 VAC) sein. C. Für andere Länder: Die Zubehörteile des Kabel-Sets müssen das Prüfsiegel derjenigen Stelle, die in dem jeweiligen Land für die Sicherheitsprüfung zuständig ist, tragen.
melden, falls es sich in der Nähe des Lecks befindet. Verwenden Sie nur die in diesem Benutzerhandbuch angegebenen Stromkabel und Batterien. Werfen Sie die Batterien nicht ins Feuer, sie könnten explodieren. Informieren Sie sich über die örtlichen Bestimmungen bezüglich der Entsorgung. 19. Benutzen Sie das Netzteil nicht in unmittelbarer Nähe zu Wasser oder anderen Flüssigkeiten. Gießen Sie nie Flüssigkeiten über das Netzteil. 20. Es besteht Explosionsgefahr, wenn der Akku nicht ordnungsgemäß ersetzt wird.
it is over heated, so try to allow plenty of room for air to circulate around the case. Do not block the ventilation opening. Do not place your computer in direct sunlight. Suitable place to work Your computer will run well wherever you’re comfortable but extremes of temperature and humidity can be challenging to your system’s parts. There are some things you can tolerate that the computer can’t – things like static electricity, dust, water, steam and oil.
11
Introduction Please use the adapter recommended in this manual.
Turning on your computer Knowing your Computer With the LCD screen open, you will see several features important for operating your notebook computer. To avoid damage to the display panel: 1. Try not to slam the display upon closing it. 2. Try not to place any object on top when it is closed or open. 3. Be sure the system is turned off or in suspend mode before you close the display panel.
Camera (Optional) LCD Display This LCD panel can only support up to a maximum opening of 115-120 degrees, please do not push it forcibly. Power/Suspend Button Press for 1~1.5 seconds to turn on the system. Press and hold for at least 4 seconds to turn off the system. Press the power / suspend button again to return from the suspend mode.
Green light indicates the hard drive and/or optical drive is being accessed. FingerPrint 4-in-1 Card Reader (SD/MMC/MS/MS Pro Memory Card) Touchpad Touchpad Buttons Left Views HDMI / External VGA Port USB 2.0 Port Enhanced USB 2.
DC In Right View USB 2.0 Port Kensington Lock Modem Port (Optional) Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. To reduce the risk of fire use only No. 26 AWG or larger telecommunication line cord.
When using a LAN, please use an EMI Shielding Cable to minimize an inteference when transmitting Bottom View Battery Lock Battery Compartment Battery Release Latch 17
18
Getting Started Connecting to a Power Source Connecting the AC Adapter A universal AC adapter is provided to supply your computer with power and also charge the computer’s battery pack. The adapter’s AC input voltage can range anywhere from 100 to 240 volts, covering the standard voltages available in almost every country.
Do not use inferior extension cords as this may result in damage to your notebook. The notebook comes with its own AC adapter. Do not use a different adapter to power the computer and other electrical devices. Whenever possible, keep the AC adapter plugged into the notebook and an electrical outlet to recharge the battery. Never turn off or reset your notebook while the hard disk is in use status icon is lit; doing so can result in loss or destruction of your data.
Only use batteries that are approved by an authorized dealer. All batteries are not the same and therefore should not be treated as such. Using the wrong battery could cause serious damage to your computer and yourself through toxic emissions. Danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions or local laws.
To Remove the Battery Pack: Charging the Battery Pack The installed battery pack charges automatically any time the computer is connected to the AC adapter and an external power source. It is a good idea to occasionally discharge the battery pack fully to preserve its operating performance.
23
Using the Notebook Computer Adjusting the LCD Screen Display The LCD screen display can be adjusted by the following key combinations. Fn + F4 Fn + F7 Fn + F8 Changes Display Mode: LCD-only, CRT (HDMI)-only and simultaneous LCD&CRT (HDMI). Increases the brightness level. Decreases the brightness level. LCD Care LCD screens are delicate devices that need careful handling.
You can switch between these display configurations by pressing the key combination [Fn] + [F4]. The Notebook’s Hot Key Controls Action Fn + F1 Fn + F2 Fn + F3 Fn + F4 Fn + F5 Fn + F6 Fn + F7 Fn + F8 Fn + F9 Fn + F10 Fn + F11 Fn + F12 System Control Enters Suspend Mode. Enters the Silent Mode. Mute/Unmute Audio/ PC beep to Output Changes Display Mode: LCD-only, CRT (HDMI)-only and simultaneous LCD&CRT (HDMI). Increase the speaker volume. Decrease the speaker volume. Increase the brightness level.
Scroll Locks WLAN On/Off Fn + F10 BlueTooth On/Off 3G On/Off Fn + F12 Brightness Fn + F7/F8 Mute On/Off Fn + F3 Volume Fn + F5/F6 Previous Play/Pause Next Stop Fast Forward Rewind Web Browser Auto-Brightness On/Off Auto-KB Brightness On/Off OSD-Bar Icon Caps Locks On Num Locks On Scroll Locks On Silent Mode ON Touchpad Off 26
WLAN On RF On (By project) Web Cam On BlueTooth On Mobile Broadband On Auto-Brightness On Auto-KB Brightness On The OSD bar can be shown on the side bar or you can drag it anywhere either on top (horizontally) or on the sides (vertically) of your screen. Vertically - Right or Left Horizontally Top or Bottom Live Power (Optional) Live Power is a saving scheme technique that provides saving your battery consumption by disabling some devices thus extending the battery life.
Dynamic mode: For system power utilization mode, switching the CPU loading and battery life to appropriate mode.
LCD Brightness: Level 1 CPU Speed: Level 0 LCD Off: Idle after 5 minutes HDD Off: Idle after 3 minutes Sleep: Idle after 5 minutes Hibernate: Idle after 10 minutes Normal Mode LCD Brightness: Level 5 CPU Speed: Maximum level LCD Off: Idle after 15 minutes HDD Off: Idle after 30 minutes Sleep: Idle after 1 hour Hibernate: Idle after 2 hours High Performance Mode LCD Brightness: Level 5 CPU Speed: Maximum level LCD Off: Never HDD Off: Never Sleep: Never Hibernate: Never 29
DVD Play Mode LCD Brightness: Level 5 CPU Speed: Maximum level LCD Off: Idle 4 hours HDD Off: Idle after 4 hours Sleep: Idle after 1 hour Hibernate: 2 hours Dynamic Switch Mode CPU Loading Battery life% High 50% up level 5 level 4 30 90% up 50% up High Performance mode High Performance mode Middle plus 30% up High Performance mode High Performance mode Middle 4%up High Performance mode Normal mode Low <4% Normal mode Normal mode
level 3 level 2 level 1 30% up 15% up 6% up less level than 0 5% High Performance mode Normal mode Power Saving mode Power Saving mode Power Saving mode Power Saving mode Power Saving mode Power Saving mode Normal mode Normal mode Normal mode Power Saving mode Power Saving mode Power Saving mode Power Saving mode Normal mode The CPU load is automatically shown on the application display indicating the power saving mode.
Do not touch the TouchPad if your fingers are dirty. Do not rest heavy objects on the TouchPad or the TouchPad buttons. You can use the TouchPad with Microsoft Windows as well as nonWindows applications. Connecting an External Tracking Devices The system will only enable you to use one tracking device whether it is an internal or external tracking device. Data Storage and Retrieval Data storage and retrieval are two of the most fundamental tasks you will perform when working with your computer.
battery life. Please refer to the topic on “Battery Calibration” describing how to calibrate your system battery discussed on the latter part of this chapter. If you discover the battery life is getting shorter, please perform the “Battery Calibration” process immediately. Removing the Battery Pack To remove the battery pack from its compartment, please refer to Chapter 3, Inserting and Removing the Battery Pack.
turned on. When the battery is fully charged, the battery charge indicator becomes off. If system runs at heavy loading or in a high temperature environment, the battery may not be fully charged. You need to continue to charge it with the AC adapter plugged in until the charging LED turns off. Battery Status Windows 7 has an applet in the Control Panel that will display an icon in the Windows taskbar indicating when the notebook is running on battery power or is attached to the AC adapter.
Dispose of used batteries according to the manufacturer's instructions. Never remove the battery pack while the power is on as this may result in data loss when the system loses power. Resetting the System After installing a software application package, you may be prompted to reset the system to load the changed operating environment. To reset the system, or “reboot,” press the [Ctrl]+[Alt]+[Delete] keys simultaneously. This is known as “warm boot.
Using the Windows Help Windows For Windows 7 help, click Start Help and Support icon will open the dialog box. Desktop Desktop may vary differently on the software installed in your notebook with different or additional shortcuts.
Recycle Bin Used for storing deleted files in case you want to recover and save it in your system. The files will only be deleted from the Recycle Bin permanently only if you empty it by right clicking your mouse and select the “Empty Recycle Bin”. Start Button Allows easy access to all Windows programs.
The Start menu allows you to adapt and show the programs used most frequently. If you wish to keep an item, right click the item and click Pin to Start menu. Log Off will enable the current user to log off and allows a new user to log on. Turn Off Computer allows you to shut down, restart, and Stand by modes for power saving purposes. Taskbar When you open a program, its icon is displayed at the taskbar for you to conveniently move between programs by clicking the relevant button.
Control Panel It is in this area that you can change how Windows looks and works. Click Start Control Panel dialog box. There are two interfaces – Classic View.
40
Internet Connection Using a modem for Connection to Internet (optional) 41
For more detail on the Network key, please refer to your local ISP provider and follow the procedures describe in the “ISP Installation Guide” to proceed with the installation.
Using Wireless LAN Network for Connection to Internet 43
44
Running BIOS Setup The Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/Output System). It runs and maintains a variety of hardware functions. It is menu-driven software, which allows you to easily configure and change the settings. The BIOS contains manufacture’s default settings for the computer’s standard operations. However, there are occasions when you may be required to modify the default settings in the BIOS.
BIOS Action Keys Function Key ESC Enter F1 F9 F10 + Command Description Leaves a sub-menu to return to the Exit previous menu OR exits the BIOS setup while saving changes. Go to Sub Screen Shows the Sub Menu General Help Shows the Help Screen Default Set to default Saves changes and reboots the Save and Exit computer. Select a field Selects the next field. Select an item Selects the next upper item. Select an item Selects the next lower item.
Main Setup Under this menu, you may change time/date and view basic processor and system memory information.
Advanced Security 48
TPM State Power Setup 49
Boot Setup 50
Exit Setup 51
52
VGA Utilities You can click the touchpad or mouse right button and select the “Personalize” item.
Adjust Resolution 54
Calibrate Color Adjust Display Setting 55
Connect to a Projector Adjust Clear Type Text 56
57
3G Connection 3G is the third generation of mobile phone standards and technology. 3G enable users a wide range of more advanced service while achieving greater network capacity through improved spectral efficiency. Press Fn + F12 to run the 3G application.
Insert the SIM card into the SIM slot. Execute the application by pressing the Mobile Partner icon From the Mobile Partner display window, click on the “Tools” item Select the “Options”.
Double click on the “Profile Management” and click on the “New” tab Click on the “OK” tab.
On the next window, click on the “Connect” tab.
62
Troubleshooting Your computer has been fully tested and complies with the system specifications before shipping. However, incorrect operations and/or mishandling may cause problems. This chapter provides a reference for identifying and correcting common hardware and software problems that you may encounter. When you encounter a problem, you should first try to go through the recommendations in this chapter.
Be sure all the device drivers are installed properly. For example, without the audio driver properly installed, the speakers and microphone will not work. If external devices such as USB camera, scanner, printer do not function correctly when connected to the system, it is usually the device’s own problem. Consult the device’s manufacturer first. Some software programs, which have not gone through rigorous coding and testing, may cause problems during your routine use.
Select Recording and click the OK button. After Click OK button, the recording volume control panel will appear. Go to [Start > Settings > Control Panel] and double-click the Multimedia icon (or Sounds and Audio Devices icon). In the Volume or Audio page, make sure that the audio codec mentioned in the spec is the default recording device.
Many browsers store files in the hard drive as a cache to speed up the performance. Check the program’s Online Help for instructions on decreasing the cache size or on removing temporary Internet files. Empty the Recycle Bin to create more disk space. When you delete files, Windows saves them to the Recycle Bin. The hard disk takes longer to read a file If you have been using the drive for a period, the files may be fragmented.
Keyboard and Mouse Problems The built-in touch pad performs erratically Make sure there is no excess perspiration or humidity on your hand when using the touch pad. Keep the surface of the touch pad clean and dry. Do not rest your palm or wrist on the surface of the touchpad while typing or using the touch pad. The built-in keyboard accepts no input Please try to make sure the system doesn’t hang up and is still working.
Memory Problems The POST does not show an increased memory capacity when you have already installed additional memory Certain brands of memory module may not be compatible with your system. You should ask your vendor for a list of compatible DIMM. The memory module may be defective. The O/S issues an insufficient memory error message during operation This is often a software or Windows-related problem. A program is draining the memory resources.
Windows crashes or freezes when you remove the PC card Make sure you have the PC card before removing it. Double-click the Safely Remove Hardware icon at the lower right corner of the task bar and select the card you wish to stop. When you click , in few seconds Windows will prompt you to remove the card. Performance Problems The computer becomes hot In a 35oC environment, the certain areas of the computer’s back case are expected to reach 50 degrees. Make sure the air vents are not blocked.
USB2.0 Problems The USB device does not work Check the settings in the Windows Control Panel. Make sure you have installed the necessary device drivers. Contact the device vendor for additional support. Unable to use the External USB Device Detach the external device; insert it into the Enhanced USB port. Separate the cable with the equipment; first insert the wire into the port, then connect the device with the cable that is inserted into the Enhanced USB port.
71
Specification O.S. Supports Windows 7 Home Premium CPU ULV Intel Celeron® Processor SFF support 743/SU2300 (Up to 1.3GHz), 1MB L2 Cache, 800MHz FSB, TDP: 10 W ULV Intel Pentium® Processor SFF support, SU4100 (Up to 1.
Audio Codec Realtek ALC269Q-GR Card reader (4 in 1) Support SDHC/MS/MMC/MS pro Memory Card USB2.0 interface LAN Controller Supports 10/100 Mb/Sec (8103EL) or 10/100/1000Mb/Sec (8111DL). PCI-E interface Wireless LAN PCI-E interface Half-Card size IEEE 802.11B/G/N (W/O N logo) Camera CCD (Optional) Support 1.3M & 2.
AC-Adapter Automatics Voltage adjustment between 100 and 240VAC 50/60Hz, 40 Watts. 2 Pin Automatics Voltage adjustment between 100 and 240VAC 50/60Hz, 40 Watts. 3 Pin Manufacture: Li Shin International Enterprise Corp. Model: LISHIN0225C2040(40W) Manufacture: Delta Electronics, Inc. Model: ADP-40MH AD(40W) Manufacture: Delta Electronics, Inc.
Weight 1.8 Kg w/ 4 cell battery 2.
