installation Manual

VT6420 User Manual – SATA Controller
Revision 1.01, May 19, 2003 35 RAID Software
2. After executing the “verify mirror” command, a dialog box will show the verifying process. This action can paused or canceled
at any time. It may take a long time to verify the source and mirror disk if the capacity of the RAID is large.
3. When mirror disk is not identical with the corresponding source disk, the mirror disk will be marked with a “need-sync” flag.
The icon used to indicate this status is
. A “need-sync” mirror disk should be synchronized as soon as possible.