Owner Manual

ELITETILE
Not all tiles can be used for every purpose. To
determine appropriate uses of the product, carefully
inspect the specications section of the product
page. Pay extra attention to the following factors:
Every tile has a P.E . I. rating that indicates how wear-
resistant a tile is on a scale of 0 to 5. The higher the
rating, the more durable the tile is. For example, a
P.E.I. rating of Class 0 shouldn’t have any foot trac
at all; it’s strictly for wall installations. A tile with a
Class 5 rating, however, can be used in pretty much
any setting, commercial and residential alike. It would
then follow that a Class 3 rating is somewhere in
between: walls, countertops, and oors with normal
foot trac.
Though ceramic and porcelain can have the same
P.E.I. ratings, there are other factors that dierentiate
the two materials. Porcelain tile is red in a kiln
at a higher temperature and greater pressure than
ceramic tile, so it’s denser and more water-resistant.
This makes it ideal for exterior applications in harsher
climates that see a lot of frost and colder weather. In
milder climates, either material is suitable.
The C.O.F. rating (coecient of friction) is a value
assigned to each oor tile designating its slip
resistance in both wet and dry conditions. A lower
combined C.O.F. rating (.4) means it is less skid
resistant; any combined rating above (.6) complies
with OSHA and Americans with Disabilities Act
requirements.
Any tile can be used as a wall tile.
Water absorption is an indicator of whether a tile
can be used inside or outside. If a tile has a low water
absorption, that means it is water and frost-resistant.
If a tile has a high water absorption, it is not frost-
resistant and more porous, which means it should
only be used inside. This is because if a tile absorbs
water, and then the surrounding temperature drops
to below freezing level, the absorbed water will
freeze and the tile may crack. However, in temperate
climates, this is not an issue. The most important
thing to consider is the use and location of the tile
you’re considering.
Tile is a low-maintenance surface choice for your
home. Its care is simple and cost-eective and will
keep tile looking brand new, lustrous and scratch-
free. Here are some tips on how to maintain a tile
installation:
Regular cleaning: Sweep the tile free of dirt and
dust (or in the case of backsplashes/wall installations,
wiping with a dry cloth) at least twice a week.
Deeper cleaning: Use soap and warm water–other
products can dull the glaze! Make sure to use non-
abrasive materials, like cloth rather than the rough
side of a sponge.
For grout lines: Use warm soap and water with a
sti-bristled toothbrush. For particularly stubborn
mold, mildew, or soap scum, use watered-down
distilled white vinegar. We recommend one part
vinegar and one part water, contained in a spray
bottle. If need be, briey leave the mixture on the
grout line before cleaning.
USE
CARE
TILE USE & CARE GUIDE
TILE USE & CARE GUIDE

Summary of content (1 pages)