Manualshelf

Installation Manual

ManualsBrandsELIVED ManualsElectronicsFull Motion TV Mount TV Wall Mount Swivel and Tilt for Most 26-55 Inch Flat Curved TVs, Wall Mount TV Bracket with Articulating 6 Arm for Max VESA 400x400mm, 88 lbs. Single Stud Corner TV Mount ELIVED
12
Min. 8"
(203mm)
Product DimensionsSTEP 3 Hang and Secure TV to Wall Plate STEP 4 Adjustments
Tool-free Tilting adjustment
Leveling adjustment
If needed, TV can be leveled ±3 degrees via adjusting the 4 nuts with the
open-end wrench.
3-1 Wall Plate Installation Integrity Test
2.75"(70mm)
OPTION B: Solid Concrete Wall Installation
Contact us by email
help@elivedglobal.com
to have these additional
pieces shipped directly
to you.
Concrete Wall Anchor
3pcs
Concrete wall anchor (NOT INCLUED)
2A-3
2A-4
2B-1
DANGER
2B-2
2B-3
2B-4
No!
No!
2.75"(70mm)
6 7 8
9 10 11
STEP 2 (Continued)STEP 2 (Continued) STEP 2 (Continued)
460mm
129mm
MAX:400mm
435mm
MAX:
400mm
MIN:
75mm
430mm
+20°
-20°
70mm
+90°/-90°
MIN:75mm
3/8"
(10mm)
Open the
Plastic Cover
A
B
Before hanging TV, please conduct "wall plate installation integrity test" first.
3-2 Hang and Secure TV to Wall Plate
88 LBS (40KG)
Fix the Plastic Cover
Safety
Screw
Phillips
Screwdriver
Release preassembled screws down on brackets, hang TV with brackets onto the
Plate, then fasten the safety screws.
C
Tighten
Loosen
±3°
-20°
+20°
7/32"
(5.5mm)
72mm
265mm
If necessary
Tilting bolts
D
Tighten
Loosen
M4 Allen Key
If TV keeps tilting down,
adjust TV to desired
angle then fasten tilting
bolts with M4 Allen Key.
TV
1 2
TV must be hang up
by two person
UP
A
B
UP
Bubble
Level
UP
Install wall plate using lag bolts and washer
with Socket Wrench, NO Electrodrill.
CAUTION: To avoid potential personal
injury or property damage:
All 3 lag bolts MUST BE firmly tightened to
prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is
securely fastened to the wall before continuing
on to the next step.
To prevent the TV falling down, the Arrow
Must Keep UP at this step!!
A
Install wall plate using lag bolts, washer and
anchor with Socket Wrench, NO Electrodrill.
CAUTION: To avoid potential personal
injury or property damage:
All 3 lag bolts MUST BE firmly tightened to
prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is
securely fastened to the wall before continuing
on to the next step.
To prevent the TV falling down, the Arrow
Must Keep UP at this step!!
A
Be sure to drill into the center of the stud.