User Manual

ManualsBrandsELIVED ManualsElectronicsFull Motion TV Mount TV Wall Mount Swivel and Tilt for Most 26-55 Inch Flat Curved TVs, Wall Mount TV Bracket with Articulating 6 Arm for Max VESA 400x400mm, 88 lbs. Single Stud Corner TV Mount ELIVED

Min. 8"

(203mm)

Product DimensionsSTEP 3 Hang and Secure TV to Wall Plate STEP 4 Adjustments

Leveling adjustment

If needed, TV can be leveled ±3 degrees via adjusting the 4 nuts with the

open-end wrench.

3-1 Wall Plate Installation Integrity Test

2.75"(70mm)

OPTION B: Solid Concrete Wall Installation

2A-3

2A-4

2B-1

DANGER

2B-2

2B-3

2B-4

No!

2.75"(70mm)

6 7 8

9 10 11

STEP 2 (Continued)STEP 2 (Continued) STEP 2 (Continued)

460mm

129mm

MAX:400mm

435mm

MAX:

400mm

MIN:

75mm

430mm

+90°/-90°

MIN:75mm

3/8"

(10mm)

Open the

Plastic Cover

Before hanging TV, please conduct "wall plate installation integrity test" first.

3-2 Hang and Secure TV to Wall Plate

88 LBS (40KG)





Fix the Plastic Cover

Safety

Screw

Phillips

Screwdriver

Release preassembled screws down on brackets, hang TV with brackets onto the

Plate, then fasten the safety screws.

Tighten

Loosen

±3°

7/32"

(5.5mm)

72mm

70mm

265mm

1 2

TV must be hang up

by two person

Bubble

Level

Install wall plate using lag bolts and washer

with Socket Wrench, NO Electrodrill.

CAUTION: To avoid potential personal

injury or property damage:

All 3 lag bolts MUST BE firmly tightened to

prevent unwanted movement of the wall plate

assembly. Ensure the wall plate assembly is

securely fastened to the wall before continuing

on to the next step.

To prevent the TV falling down, the Arrow

Must Keep UP at this step!!

Install wall plate using lag bolts, washer and

anchor with Socket Wrench, NO Electrodrill.

CAUTION: To avoid potential personal

injury or property damage:

All 3 lag bolts MUST BE firmly tightened to

prevent unwanted movement of the wall plate

assembly. Ensure the wall plate assembly is

securely fastened to the wall before continuing

on to the next step.

To prevent the TV falling down, the Arrow

Must Keep UP at this step!!

Be sure to drill into the center of the stud.

these additional pieces

shipped directly to you.

Ф10×61mm

Concrete wall anchor (NOT INCLUED)

+3°/-3°

+20° -20°

Tool-free Tilting adjustment

-20°

+20°

If necessary

If TV keeps tilting down,

adjust TV to desired

angle then fasten tilting

bolts with M4 allen key

and open-end wrench.

Open-end

wrench

Allen Key