Technical Specifications

C-E10
© 2021 Eljer
BY AMERICAN STANDARD
spec_025-0142R Cabrillo WP-Air-SoakTub Rev. 3 6/21
Cabrillo
™
Whirlpool, Air, Combo and Soaking Tub
HIGH GLOSS ACRYLIC
NOTES:
SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM
PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.2
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
GENERAL SPECIFICATIONS FOR CABRILLO™ WHIRLPOOL
60 x 32 x 20-1/2 In. (1524 x 813 x 520 mm)
124 Lbs. (56 Kg.)
699 Lbs. (318 Kg.)
69 Gal. (261 L)
18 x 36 In. (457 x 914 mm)
16 In. (406 mm)
52 Lbs./Sq.Ft. (256 Kgs./Sq.m)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
MODEL 025-0142R/L
Right hand drain shown
32"
(813 mm)
60"
(1524 mm)
19"
(483 mm)
9-1/2"
(241 mm)
38-1/2"
(978 mm)
32"
(813 mm)
20-1/2"
(521 mm)
16"
(406 mm)
PROVIDE
ACCESS
TO PUMP