User's Manual

M1 Installation and Programming Manual
Page 39
T1: 12:=000000r
Acct # for Area8
T1: 13:=Yes Rptr
AreaAlms,RestUnbp
T1: 14:=No Rptr
Bypasses
Telephone Acct Setup Description of Option
The Account number for Area 4 (up to 6 digits) when it is reported to this telephone
number. Since all 6 digits must be entered, enter leading zeros (0’s) if a shorter account
number is required.
The Account number for Area 5 (up to 6 digits) when it is reported to this telephone
number. Since all 6 digits must be entered, enter leading zeros (0’s) if a shorter account
number is required.
The Account number for Area 6 (up to 6 digits) when it is reported to this telephone
number. Since all 6 digits must be entered, enter leading zeros (0’s) if a shorter account
number is required.
The Account number for Area 7 (up to 6 digits) when it is reported to this telephone
number. Since all 6 digits must be entered, enter leading zeros (0’s) if a shorter account
number is required
The Account number for Area 8 (up to 6 digits) when it is reported to this telephone
number. Since all 6 digits must be entered, enter leading zeros (0’s) if a shorter account
number is required.
THE FOLLOWING 5 OPTIONS DEFINE WHAT IS REPORTED BY THIS TELEPHONE #
This YES or NO option identifies whether this telephone number should report misc.
options from the AREA REPORTING CODES menu, Zone Alarms, Restores, and
Unbypasses from the ZONE REPORTING CODES menu, and Keypad Alarms from the
KEYPAD F-KEY REPORTING CODES menu.
This YES or NO option identifies whether this telephone number should report the Zone
Bypasses from the ZONE REPORTING CODES menu.
This YES or NO option identifies whether this telephone number should report the Zone
Troubles from the ZONE REPORTING CODES menu.
This YES or NO option identifies whether this telephone number should report the user
opening and closing codes from the USER REPORTING CODES menu.
This YES or NO option identifies whether this telephone number should report the global
system event codes from SYS REPORT OPTIONS & CODES menu.
To edit or program a text description (Name) such as “ACME Central Station” for the
Telephone number press left arrow key. Spell out the text using the number keys. I.E.
For a “K” press the 5 key twice. To move the cursor press the right or left arrow keys.
While programming the text, pressing the Chime key inserts a space, and the Bypass
key erases 1 digit. The up and down arrow keys toggles between upper and lower case.
Press the ELK key when complete.
T1: 15:=No Rptr
Zone Troubles
T1: 16:=No Rptr
User ReportCodes
T1: 17:=Yes Rptr
Global SysEvents
Menu 08 Telephone Account Setup (continued)
T1: 18:Name l
[Name for Tel#1]
T1: 10:=000000r
Acct # for Area6
T1: 11:=000000r
Acct # for Area7
T1: 09:=000000r
Acct # for Area5
T1: 08:=000000r
Acct # for Area4