Owners Manual

Speaker & Stainless Steel Enclosure
ELK-1RT
The ELK-1RT is a rugged 30 Watt, 8 Ohm
speaker mounted in a corrosion and tamper
resistant enclosure. It features two sealed reed
tamper switches, one on the Back plate and one
on the Front Cover. The stainless steel naturally
reects the mounting surface and blends easily
with any residential or commercial building. Also
available is the ELK-150RT with Built-in Siren or
the ELK-SL1 Strobe Light that can be added to
the enclosure.
• Installer Friendly - Easy to Mount
• Corrosion Resistant
• Exterior / Interior use
• Sealed Reed Tamper Switches at single bolt
closure and at rear of cabinet
• Compact - Less Noticeable
• Loud - Rivals Sound of Larger Speakers
• Heavy Duty 1.8 lb Magnet
• High Fidelity Voice Coil
• Stainless Steel Mounting Hardware Included
• Lifetime Limited Warranty
• Rating: 30 Watts Nominal / 50 Watts Peak
• Impedance: 8 Ohms
• Frequency Response: 500 to 7000 Hz
• Enclosure: #304 Stainless Steel
• Size: 5”H x 5”W x 4”D
• Tamper: Sealed Reed Switches
PO Box 100 • Hildebran, NC 28637 • 800-797-9355 • 828-397-4200
Fax [phone] • www.elkproducts.com • [e-mail]
Features
Specications
ELK
PRODUCTS, INC.
ELK-1RT
with optional
ELK-SL1C
Clear Strobe
Tamper-Proof Cover 30 Watt Speaker
Hardware Pak
Back Plate w/
(2) Tamper
Switches
Features and Specications subject to change without notice.
Cut-away
view
Components of
ELK-1 RT
12/15