Use and Care Manual

Page 2
97747C (Rev. J - 5/13)
NOTE: The filter head contains an automatic shut-off valve that stops the flow of water, if the filter is removed
inadvertently without shutting off the incoming water.
NOTE: If the flow exceeds the rated flow rate, install a flow restrictor, Elkay Part No. 50967C, to limit the flow to .5 gpm.
Table A
REPLACEMENT FILTER
Part No.
Description
Lead, C.T.O. Filter51299C
ITEMIZED PARTS LIST
Item No. Part No. Description
Bracket - Filter Mounting
Screw #8-18 x .50 (13mm) LG. HHSM
Filter Head & Bracket Assembly
Screw #8-18 x .75 (19mm) LG. PH
Poly Tubing(Cut to Length)
Fitting - Superseal 3/8" (10mm)
Fitting - Superseal 1/4" (6mm)
Filter Assembly
Union - 1/4" (6mm)
Elbow Adapter 3/8" x 3/8"
22490C
38417002
51469C
70792C
56092C
70823C
70822C
See Table A
70683C
70818C
*1
2
**3
4
5
6
7
8
9
10
FIG. 3
8
9
10
WHEN
REQUIRED
5
6
7
4
3
2
1
ELKAY WaterSentry
®
VII
Filter
Pressure (Max.)
Pressure (Min.)
Flow Rate
Rated Capacity
Temperature (Max.)
Temperature (Min.)
RATED OPERATING CONDITIONS
105 PSI (7.4 Kg/cm
2
)
20 PSI (1.4 Kg/cm
2
)
1.5 GPM (5.7 LPM)
1,500 Gallons (5,679 L)
120° F (50° C)
40° F (5° C)
LZ*
LZTL*
FILTER LOCATION
FILTER LOCATION
*Note: Bracket can be turned over to provide better fit in some models.
**Item No(s). 1, 4, 6, and 7 included with item No. 3.
NOTE: Performance will vary depending on local water
conditions.
NOTE: This system and installation shall comply with
applicable state and local regulations.