Installation Instructions

WARNING: Please carefully read and properly follow the instructions for installation found in this manual.

STEPS:

7.Tighten set screw in mounting bracket (1). Slide

flange (2) over the mounting bracket and tighten set

screw.

8.Turn on water supply in preparation to water test the

faucet. Remove aerator with plastic wrench and turn on

faucet for approximately two minutes to flush any debris

from the water line. Run water into a large pan or bucket.

Replace aerator and clean faucet with warm water and a

soft cotton towel.

CARE AND CLEANING INSTRUCTIONS

Congratulations on your purchase of an Elkay product. Although

your product is extremely durable, attention should be given to the

care, cleaning and maintenance of this product. Cleaning agents

and abrasives may cause damage, which may result in oxidation

and discoloration.

By following these simple guidelines for proper care and cleaning, it

will give you years of enjoyment:

TO CLEAN: Simply wipe gently with a damp cloth and blot dry with

a soft towel.

·Avoid build-up of soap, or mineral deposits, as these tend to

have an adverse effect on the appearance of the product.

·NEVER use cleaning products of any kind on this product -

especially those containing ammonia, bleach or alcohol - or those

with any form of abrasive.

Failure to follow care and cleaning will void your warranty.

For additional information, please visit elkayusa.com.