Dimensions Guide

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel. Top mount.
DESIGN FEATURES
Bowl Depths: 6-1/8" (156mm) (BLR[Q]1560), 7-1/8" (181mm)
(all others).
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" (5mm) below outside
edge of sink.
Finish: Exposed surfaces are hand blended to a Lustrous
Highlighted Satin finish.
Underside: Fully undercoated to dampen sound and reduce
SINK PACKAGES
BLH15C Package includes:
(1) BLR15 Sink.
(1) LKDA2437C Faucet.
(1) LK36 Basket strainer.
BLR150C Package includes:
(1) BLR15 Sink.
(1) LKD2223C Faucet.
(1) LK36 Basket strainer.
OTHER
Drain Openings: 3-1/2" (89mm) (BLR[Q]1516), 2" (51mm) (all
others).
NOTE: Unless otherwise specified, sink is furnished with 1 faucet
hole as shown.
OPTIONAL ACCESSORIES
Bottom Grid: LKWBG12090SS (BLH15C, BLR150C, BLR[Q]15,
BLR[Q]1560).
Cutting Board: CB912.
Drains: LK36 (BLH15C, BLR150C, BLR[Q]15, BLR[Q]1560), LK99
(BLR[Q]1516).
Installation hardware for thicker countertops: LK363 (up to
1-1/2" [38mm] thick); LK463 (up to 2-1/2" [66mm] thick).
Rinsing Basket: LKWRB1209SS.
Utensil Caddy for Rinsing Basket: LKWUCSS.
Model BLR(Q)151
Model BLR150C
Model BLH15C
Gourmet
™
Sink
and Sink Packages
SPECIFICATIONS
All sinks 6-1/2” or less in depth are compliant to ADA
and ANSI/ICC A117.1 accessibility requirements when installed
according to the requirements outlined in these standards.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 10/14)
1-3I
elkay.com
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4