Single Bowl Hospitality Sink Specification Sheet

Pacemaker
®
Single Bowl Hospitality Sink
No Faucet Ledge
Models BPSFR1215 and BPSFRQ1215
®
SPECIFICATIONS
GENERAL
Fine quality sink bowl seamlessly formed of #20 gauge, type
304 (18-8) nickel bearing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depth: 6-1/8".
Coved Corners: 1-3/4" vertical and horizontal radius.
Bowl Recess: 3/16" below outside ledge of sink.
Finish: Exposed surfaces are polished to a lustrous high-
lighted satin finish.
Underside: Fully undercoated to dampen sound and prevent
condensation.
OTHER
Drain Opening: 2".
These sinks comply with ANSI Standard A112.19.3M.
OPTIONAL ACCESSORIES
Cutting Board: CB912.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2004 Elkay
(Rev. 3/04) 1-192A
www.elkayusa.com
Model BPSFR(Q)1215
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
Model BPSFR1215 Illustrated
6-1/8"
12"
1-3/4" R
1-3/4" R
9-1/4"
12-1/2"
15"
SINK DIMENSIONS (INCHES)*
*Length is left to right. Width is front to back.
Cutout in
Countertop
U-Channel Quick-Clip
®
(1
1
/2" Radius
Minimum Ship.
Model Model
Overall Inside Bowl Corners)
Cabinet Wt.
Number Number L W L W D L W Size Lbs.
BPSFR1215 BPSFRQ1215 12
1
/2 15 9
1
/4 12 6
1
/8 11
7
/8 14
3
/8 18 5
Quick-Clip
®
Mounting System
U-Channel Type Mounting System