Dimensions Guide

GENERAL
Fine quality sink bowl seamlessly formed of #20 gauge, type 304
(18-8) nickel bearing stainless steel. Top Mount.
DESIGN FEATURES
Bowl Depth: 6-1/8" (156mm).
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Rim Height: 3/16" (5mm)below outside edge of sink.
SINK PACKAGES
BPSRA150C Package includes:
(1) BPSR15 Sink.
(1) LKD20888C Deluxe two-handle faucet with 4-1/2" (114mm)
rigid goose-neck spout.
(1) LK36 Strainer.
BPSH15C Package includes:
(1) BPSR15 Sink.
(1) LKDA2437C Hi-Arc
®
two-handle bar faucet with 9" (229mm) high
(deck to aerator height) traditional swing spout.
(1) LK36 Strainer.
OTHER
Drain Opening: 2" (51mm).
NOTE: BPSH15C is furnished with 3 faucet holes.
Model BPSR(Q)151
SINK DIMENSIONS (INCHES)*
Pacemaker
®
Single Bowl Hospitality Sink
and Sink Packages
Models BPSRA150C, BPSH15C, BPSR15 and BPSRQ15
®
SPECIFICATIONS
Model BPSH15C
Model BPSRA150C
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Finish: Exposed surfaces are hand polished to a Bright
Satin finish.
These sinks are compliant to ADA and ANSI/ICC A117.1
accessibility requirements when installed according to the
requirements outlined in these standards.
Underside: Fully undercoated to reduce condensation
and dampen sound.
Inside Bowl
Minimum
Model
Overall
Cutout in
Countertop
(1-1/2" (38mm)
Radius Coners
No. of 1-1/4" (32mm)
or 1-1/2" (38mm)
Dia. Faucet Holes
4" (102 mm) centers
Cabinet
Number
L W L W D L W
Size
-
M
Quick-ClipU-Channel
odel
Number
BPSRA150C 15
(381mm)
15
(381mm)
12
(318mm)
9-1/4
(318mm)
6-1/8
(318mm)
14-3/8
(318mm)
14-3/8
(318mm)
-BPSH15C 15
(381mm)
15
(381mm)
12
(318mm)
9-1/4
(318mm)
6-1/8
(318mm)
14-3/8
(318mm)
14-3/8
(318mm)
BPSR15 BPSRQ15 15
(381mm)
15
(381mm)
12
(318mm)
9-1/4
(318mm)
6-1/8
(318mm)
14-3/8
(318mm)
14-3/8
(318mm)
1
3
1, 2, MR2, or 3
18
(457mm)
18
(457mm)
18
(457mm)
* Length is left to right. Width is front to back
OPTIONAL ACCESSORIES
Cutting Board: CB912
Rinsing Basket: LKWRB1209SS
Utensil Caddy for Rinsing Basket: LKWUCSS
Bottom Grid: LKWBG1209SS
Drain: LK36
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 08/14)
1-6
elkay.com
Model LKD20888C
Model LKDA2437C