Specification Sheet

Model CHS1716C Illustrated
40°
1/8" R
(3mm)
1-1/2"
(38mm)
8-1/2"
(216mm)
STAINLESS STEEL
BRACKETS WITH
HEMMED EDGE
2-3/8"
(60mm)
15-1/2"
(394mm)
9-1/4"
(235mm)
1-3/4" R
(45mm)
1-3/4" R
(45mm)
15"
(381mm)
6"
(152mm)
6"
(152mm)
2-3/4"
(70mm)
16-3/4"
(425mm)
12"
(305mm)
2-3/8"
(60mm)
2-3/8"
(60mm)
2"
(51mm)
3-7/8"
(98mm)
7"
(178mm)
8-1/2"
(216mm)
1-1/2"
(38mm)
1-1/2" (38mm)
I.P.S. WASTE
WALL HANGER
12" (305mm) LONG
BACKSPLASH SLOPED
AT 45° ANGLE
2-3/16" DIA. HOLE
(56mm)
RAISED RIM AT
FRONT & SIDES
3/8"
(10mm)
SECTION THROUGH RIM
3/8" (10mm) x 3/4" (19mm)
LONG SLOT
SEE OTHER SIDE FOR FAUCET
HOLE DRILLING CONFIGURATIONS
3-1/4"
(83mm)
G
ENERAL
CHS1716C Type 304 (18-8) stainless steel hand wash-up sink.
Basin has 1-3/4" (45mm) radius coved corners. Full length 7"
(178mm) high backsplash. Exposed surfaces have a brushed
finish. Furnished with a wall hanger and integral stainless steel
support brackets. Carries NSF International Certification.
FURNISHED COMPLETE WITH:
SUPPLY: LK940GN04L2H Chrome plated gooseneck spout
faucet with AE13A aerator.
DRAIN: LK8 Chrome plated stamped brass perforated strainer
grid. 1-1/2" (38mm) O.D. x 4" (102mm) tailpiece.
TRAP: LK500 Chrome plated cast brass 1-1/2" (38mm) O.D.
“P” trap with cleanout, 1-1/2" (38mm) O.D. waste arm
to wall, and wall flange.
FOLLOWING MODEL DOES NOT INCLUDE FAUCET AND
FITTINGS:
CHS1716
SPECIFY FAUCET DRILLINGS AND LOCATION.
(See other side for standard faucet hole drilling configurations.)
Model CHS1716C
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
Hand Wash-Up Sink
Type 304
Models CHS1716C and CHS1716
S PECIFICAT I O N S
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2009 Elkay
(11/09) 4-1H
elkayusa.com