Specification

G
ENERAL
Good quality sink formed of #20 gauge, type 304 (18-8) nickel
bearing stainless steel. Self-rimming top mount.
DESIGN FEATURES
Bowl Depth: 7".
Coved Corners: 3" vertical and 2-1/4" horizontal radius.
Bowl and Faucet Deck Recess: 3/16" below outside edge of
sink.
F
inish: Exposed surfaces are polished to a highlighted
C
elebrity bright satin finish.
Underside: Fully undercoated to dampen sound and prevent
condensation.
OTHER
Drain Opening: 3-1/2".
NOTE: Unless otherwise specified, sink is furnished with 4
faucet holes as illustrated.
Complies with ASME A112.19.3.
OPTIONAL ACCESSORIES
Rinsing Basket: LKWERBSS.
Utensil Caddy for Rinsing Basket: LKWUCSS.
Bottom Grid: LKWBG1415SS.
Cutting Board: CB1516.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2007 Elkay
(Rev. 10/07) 1-15D
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
22"
15-3/4"
4-1/4"
7"
4" 4" 4"
7-7/8"
14" 14"
33"
3"R
2-1/4"R
7"
15-1/4"
Model CR33224 Illustrated
Celebrity
®
Double Bowl Sink
Model CR3322
®
S PECIFI C ATI O N S
M
odel CR33224
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
Cutout in
Countertop
No. of
Inside (1
1
/2" Radius
1
1
/2" Dia. Minimum
Model
Overall Each Bowl Corners)
Faucet Holes Cabinet
Number LWLWD L W 4" Centers Size
CR3322 33 22 14 15
3
⁄4 7 32
3
⁄8 21
3
⁄8 1, 2, MR2, 3, 4 or 5 36
SINK DIMENSIONS (INCHES)*
*Length is left to right. Width is front to back.
HOLE DRILLING
CONFIGURATIONS
1
4"
2
4"
MR2
4" 4"
3
4" 4" 4"
4
4" 4" 4" 4"
5
This sink is listed with the Canadian Standards
Association.