Installation

• Elkay recommends that undermount sinks be installed by a professional, experienced installer.
• Enclosed in the sink carton is a cutout template that can be used to make the countertop cutout per the installation type of
the sink model purchased (1/2" sink rim reveal ). Your installer may also retrieve the DXF file from our website,
www.elkay.com.
• Elkay undermount sinks should only be fastened to a solid surface countertop (i.e. granite / Corian
®
). Elkay recommends
that the sink cutout and mounting holes be cut by the countertop fabricator prior
to installation.
• Elkay is not responsible for the sink or countertop if damaged during installation.
• Metal edges may be sharp. Use caution when handling.
• Follow all local plumbing and building codes.
• Inspect sink for damage prior to beginning installation.
Required Tools (not included)
Installation Profile
Installation
Attention Installer:
Fasten the mounting brackets
(optional accessory - LKUCLIP8) loosely into
the pre-drilled mounting holes in the countertop.
Apply silicone caulk (not included) evenly
around the top of the sink flanges.
Position and align the sink under the countertop
opening. Press the silicone and flange up onto
the countertop.
From the underside, lightly tighten the fasteners
with a screwdriver until the sink is snug against
the countertop.
Check alignment of the sink to the countertop
opening and then tighten the fasteners until the
sink is tight against the countertop. Do not over
tighten.
Wipe away any excess caulk with a rag.
Installation Instructions:
Undermount Sinks
WARNING: Always wear safety goggles and gloves when
installing the sink to prevent personal injury.
1-1/8"
1/2" Sink Rim Reveal Installation
Countertop
Mounting
bracket
(Optional
accessory)
Fastener
(Not furnished)
Countertop recessed
approx. 1/2"
Silicone caulk
(Not furnished)
Sink
Countertop
Mounting bracket
(opptional accessory)
Fastener
(not furnished)
©2021Elkay Manufacturing Company (6/8) 2000000328.pdf
1333 Butterfield Road, Suite 200 | Downers Grove, IL 60515 | elkay.com
3
2
1
Cut Resistant
* 1/2" reveal is required for all accessories to work as shown.